Auto Parts Search
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1997 Infiniti QX4 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1997 Infiniti QX4 cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1997 Infiniti QX4 3.3 V6 GAS
- Place vehicle in neutral and release parking brake.
- Raise vehicle off ground and support it with safety stands in proper locations.
- Mark rear pinion flange. Its recommended to use paint for reference marks. Never damage driveshaft flange and companion flange on front drive.
- R...
CLICK HERE TO GET FULL ACCESS TO 1997 Infiniti QX4 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1997 Infiniti QX4 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1997 Infiniti QX4 cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assembly -> Disassemble
Vehicle: 1997 Infiniti QX4 3.3 V6 GAS
Disassemble
- Mark shaft and flange or yoke.
- Remove snap ring.
- Remove pushed out journal bearing by lightly tapping yoke with a hammer. Do not damage journal and yoke hole.
- Remove bearing at opposite side in above operation. Place reference mark on disassembled parts so that they can be reinstalled in their original positions from which they were removed.
Assembly
- Assemble journal bearing and apply appro...
CLICK HERE TO GET FULL ACCESS TO 1997 Infiniti QX4 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1997 Infiniti QX4 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1997 Infiniti QX4 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 1997 Infiniti QX4 3.3 V6 GAS
Front
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove snap ring.
- Remove side flange mounting bolt and separate shaft.
- Remove transverse link nut and bolts.
- Separate wheel hub and bearing assembly from driveshaft by lightly tapping end with suitable tool and wood block, then remov...
CLICK HERE TO GET FULL ACCESS TO 1997 Infiniti QX4 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1997 Infiniti QX4 vehicle. |
Access the Complete guide! |