Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1997 Mercury Cougar car and truck
repair procedures including Mercury engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1997 Mercury Cougar automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1997 Mercury Cougar
- 1997 Mercury Cougar XR-7 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:W
- 1997 Mercury Cougar XR-7 3.8 V6 GAS, CID:232, Fuel Injection, Aspiration:232, Engine VIN:, Desg:4
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1997 Mercury Cougar AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1997 Mercury Cougar cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1997 Mercury Cougar XR-7 3.8 V6 GAS
- Raise and support vehicle.
- Index-mark driveshaft. Place a paint index-mark on pinion flange to driveshaft centering socket yoke.
- Remove driveshaft-to-driveshaft pinion flange bolts.
- Place a paint index-mark on driveshaft slip-yoke to transmissio...
CLICK HERE TO GET FULL ACCESS TO 1997 Mercury Cougar DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1997 Mercury Cougar AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1997 Mercury Cougar cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 1997 Mercury Cougar XR-7 4.6 V8 GAS
Disassemble
Do not clamp driveshaft in jaws of a vice or a similar holding fixture.
- Place driveshaft on a suitable workbench.
- Mark positions of driveshaft components relative to driveshaft tube. This ensures all components are reassembled in same relationship to maintain correct balance.
- Index driveshaft and driveshaft components.
- Clamp U-Joint Tool in a vise.
- Remove snap rings.
- If bearing cup cannot be pressed all way out, remove it with vise grips.
- Remove driveshaft slip-yoke.
- Position driveshaft in U-Joint Tool.
- Press out a bearing cup.
- Rotate driveshaft 180 degrees.
- Press on...
CLICK HERE TO GET FULL ACCESS TO 1997 Mercury Cougar DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1997 Mercury Cougar AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1997 Mercury Cougar cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 1997 Mercury Cougar XR-7 3.8 V6 GAS
Disassemble
Do not clamp driveshaft in jaws of a vice or a similar holding fixture.
- Place driveshaft on a suitable workbench.
- Mark positions of driveshaft components relative to driveshaft tube. This ensures all components are reassembled in same relationship to maintain correct balance.
- Index driveshaft and driveshaft components.
- Clamp U-Joint Tool in a vise.
- Remove snap rings.
- If bearing cup cannot be pressed all way out, remove it with vise grips.
- Remove driveshaft slip-yoke.
- Position driveshaft in U-Joint Tool.
- Press out a bearing cup.
- Rotate driveshaft 180 degrees.
- Press on...
CLICK HERE TO GET FULL ACCESS TO 1997 Mercury Cougar DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1997 Mercury Cougar AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1997 Mercury Cougar cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1997 Mercury Cougar XR-7 4.6 V8 GAS
- Raise and support vehicle.
- Index-mark driveshaft. Place a paint index-mark on pinion flange to driveshaft centering socket yoke.
- Remove driveshaft-to-driveshaft pinion flange bolts.
- Place a paint index-mark on driveshaft slip-yoke to transmissio...
CLICK HERE TO GET FULL ACCESS TO 1997 Mercury Cougar DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
