Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1997 Nissan Pickup car and truck
repair procedures including Nissan engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1997 Nissan Pickup automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1997 Nissan Pickup
- 1997 Nissan Pickup 2.4 L4 GAS, CC:2389, Fuel Injection, Engine VIN:, Desg:S
- 1997 Nissan Pickup SE 2.4 L4 GAS, CC:2389, Fuel Injection, Engine VIN:, Desg:S
- 1997 Nissan Pickup XE 2.4 L4 GAS, CC:2389, Fuel Injection, Engine VIN:, Desg:S
- 1997 Nissan Pickup Short BED XE 2.4 L4 GAS, CC:2389, Fuel Injection, Engine VIN:, Desg:S
BRAKE SERVICE PROCEDURES FOR 1997 Nissan Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Nissan Pickup cars and light trucks from 1990+.
Disc Brakes -> Caliper Service -> Front -> Overhaul -> Rear -> Replacement
Vehicle: 1997 Nissan Pickup Short BED XE 2.4 L4 GAS
Front
Replacement
- Raise and support front of vehicle and remove wheels.
- Disconnect brake hose from brake tube.
- Remove caliper assembly from spindle.
- Reverse procedure to install.
Overhaul
- Remove pin bolts and separate cylinder body from torque member.
- Remove pad retainers, shims and brake pads.
- Feed compressed air gradually into caliper port and force out piston(s) with dust seals.
- Remove piston seals, sub pins, main pins and dust seals.
- Reverse procedure to assemble.
Rear
Replacement
- Disconnect parking brake cable and brake hose.
- Remove caliper retaining bolts and caliper from vehicle.
- Reverse...
CLICK HERE TO GET FULL ACCESS TO 1997 Nissan Pickup BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Nissan Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Nissan Pickup cars and light trucks from 1990+.
Anti-lock Brakes -> System Service -> 1997 -> 1997-98 -> 1997-99 -> 1998-2001 -> 1999-2002 -> 2000-02 -> 2002 -> 200SX -> 240SX -> ABS Actuator, Replacement -> Altima -> Altima, Maxima, Pathfinder, Quest, Sentra, 200SX & 240SX -> Brake System Bleed -> Component Replacement -> Frontier -> Frontier & Xterra -> Maxima -> Pathfinder -> Pickup -> Quest -> Sentra -> Wheel Sensor, Replacement -> Xterra
Vehicle: 1997 Nissan Pickup Short BED XE 2.4 L4 GAS
Brake System Bleed
Refer to "Hydraulic Brake Systems" for brake bleed procedure.
Component Replacement
ABS Actuator, Replacement
Altima
1997
- Remove actuator relay assembly.
- Drain brake fluid into a suitable container.
- Remove master cylinder.
- Disconnect brake pipes.
- Disconnect ABS actuator harness connectors Fig. .
- Remove ABS actuator retaining bolts and actuator.
- Reverse procedure to install. Bleed air from system.
1998-2001
- Disconnect ABS actuator and control unit harness connectors.
- Remove ABS actuator and control unit retaining bolts and assembly.
- Reverse procedure to install.
2002
- Remove windshi...
CLICK HERE TO GET FULL ACCESS TO 1997 Nissan Pickup BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Nissan Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Nissan Pickup cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> Master Cylinder, Replace
Vehicle: 1997 Nissan Pickup Short BED XE 2.4 L4 GAS
Master Cylinder, Replace
Do not spill brake fluid on painted areas, it may cause paint damage.
- Connect a vinyl tube to the bleeder screws.
- Depress brake pedal, open bleeder valves and drain fluid into suita...
CLICK HERE TO GET FULL ACCESS TO 1997 Nissan Pickup BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Nissan Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Nissan Pickup cars and light trucks from 1990+.
Anti-lock Brakes -> Electrical Components Inspection -> 240SX -> Actuator Motor Relay -> Altima, Maxima, Sentra & 200SX -> Frontier, Pathfinder & Pickup -> Quest -> Solenoid Valve Relay -> Wheel Sensors
Vehicle: 1997 Nissan Pickup Short BED XE 2.4 L4 GAS
Altima, Maxima, Sentra & 200SX
Wheel Sensors
Check resistance between wheel sensor connector terminals, Fig. . Resistance should be 1.0-1.25 K-ohms.
Actuator Motor Relay
Check continuity between motor relay terminals as shown in Figs. through .
Solenoid Valve Relay
Check continuity between solenoid valve relay terminals as shown in Figs. and .
240SX
Refer to Figs. for electrica...
CLICK HERE TO GET FULL ACCESS TO 1997 Nissan Pickup BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Nissan Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Nissan Pickup cars and light trucks from 1990+.
Drum Brakes -> Adjustments -> 240SX -> Altima -> Frontier, Pathfinder & Pickup -> Maxima -> Parking Brake -> Quest -> Sentra & 200SX
Vehicle: 1997 Nissan Pickup SE 2.4 L4 GAS
Parking Brake
Altima
- Prior to adjustment, check the following:
- On models equipped with rear disc brakes, ensure toggle lever returns to stopper when parking brake lever is released, Fig. .
- On all models, ensure there is no drag when parking brake lever is released.
- Release parking brake lever and loosen adjusting nut.
- Start engine and depress brake pedal fully at least 10 times with engine running.
- Pull parking brake control lever 4-5 notches, then adjust control lever by turning adjusting nut, Fig. .
- Pull control lever using approximately 44 lbs. of force, parking brake should be engaged ...
CLICK HERE TO GET FULL ACCESS TO 1997 Nissan Pickup BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Nissan Pickup AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Nissan Pickup cars and light trucks from 1990+.
Power Brake Units -> Troubleshooting
Vehicle: 1997 Nissan Pickup 2.4 L4 GAS
- With engine off, depress brake pedal several times. There should be no change in pedal stroke.
- With brake pedal depressed, start engine. Pedal should go down slightly.
- Run engine for two minutes, then turn engine off. Depress brake pedal slowly several times.
- Pe...
CLICK HERE TO GET FULL ACCESS TO 1997 Nissan Pickup BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1997 Nissan Pickup vehicle.
|
| Access the Complete guide! |
