Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1997 Porsche 911 car and truck
repair procedures including Porsche engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1997 Porsche 911 automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1997 Porsche 911
- 1997 Porsche 911 Carrera 4 3.6 H6 GAS, CC:3606, Fuel Injection, Engine VIN:, Desg:A
- 1997 Porsche 911 Carrera 2 3.6 H6 GAS, CC:3606, Fuel Injection, Engine VIN:, Desg:A
- 1997 Porsche 911 Targa 3.6 H6 GAS, CC:3606, Fuel Injection, Engine VIN:, Desg:A
- 1997 Porsche 911 Carrera 4S 3.6 H6 GAS, CC:3606, Fuel Injection, Engine VIN:, Desg:A
- 1997 Porsche 911 Turbo 3.6 H6 GAS, CC:3606, Fuel Injection, Engine VIN:, Desg:C
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1997 Porsche 911 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1997 Porsche 911 cars and light trucks from 1990+.
Starter, Replace -> Automatic Transmission -> Manual Transmission
Vehicle: 1997 Porsche 911 Carrera 4S 3.6 H6 GAS
Automatic Transmission
- Remove engine guard and underside rear panel.
- Remove air distributor pipe on left and right sides of transmission.
- Loosen transmission mounting bolts and lower approximately .4 inch.
- Disconnect solenoid electrical connectors.
- Remove solenoid wire clamp and tie wrap from starter, then the oil pipe from body.
- Remove starter bolts and ground strap.
- Lift starter from support and rotate starter pinion toward engine oil filter.
- Rotate starter 1/2 turn until solenoid faces transmission, then carefully remove starter.
- Reverse procedure to install. Torque starter mounting ...
CLICK HERE TO GET FULL ACCESS TO 1997 Porsche 911 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1997 Porsche 911 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1997 Porsche 911 cars and light trucks from 1990+.
Starter, Replace -> Automatic Transmission -> Manual Transmission
Vehicle: 1997 Porsche 911 Carrera 2 3.6 H6 GAS
Automatic Transmission
- Remove engine guard and underside rear panel.
- Remove air distributor pipe on left and right sides of transmission.
- Loosen transmission mounting bolts and lower approximately .4 inch.
- Disconnect solenoid electrical connectors.
- Remove solenoid wire clamp and tie wrap from starter, then the oil pipe from body.
- Remove starter bolts and ground strap.
- Lift starter from support and rotate starter pinion toward engine oil filter.
- Rotate starter 1/2 turn until solenoid faces transmission, then carefully remove starter.
- Reverse procedure to install. Torque starter mounting ...
CLICK HERE TO GET FULL ACCESS TO 1997 Porsche 911 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1997 Porsche 911 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1997 Porsche 911 cars and light trucks from 1990+.
Starter, Replace -> Automatic Transmission -> Manual Transmission
Vehicle: 1997 Porsche 911 Turbo 3.6 H6 GAS
Automatic Transmission
- Remove engine guard and underside rear panel.
- Remove air distributor pipe on left and right sides of transmission.
- Loosen transmission mounting bolts and lower approximately .4 inch.
- Disconnect solenoid electrical connectors.
- Remove solenoid wire clamp and tie wrap from starter, then the oil pipe from body.
- Remove starter bolts and ground strap.
- Lift starter from support and rotate starter pinion toward engine oil filter.
- Rotate starter 1/2 turn until solenoid faces transmission, then carefully remove starter.
- Reverse procedure to install. Torque starter mounting ...
CLICK HERE TO GET FULL ACCESS TO 1997 Porsche 911 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1997 Porsche 911 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1997 Porsche 911 cars and light trucks from 1990+.
Starter, Replace -> Automatic Transmission -> Manual Transmission
Vehicle: 1997 Porsche 911 Carrera 4 3.6 H6 GAS
Automatic Transmission
- Remove engine guard and underside rear panel.
- Remove air distributor pipe on left and right sides of transmission.
- Loosen transmission mounting bolts and lower approximately .4 inch.
- Disconnect solenoid electrical connectors.
- Remove solenoid wire clamp and tie wrap from starter, then the oil pipe from body.
- Remove starter bolts and ground strap.
- Lift starter from support and rotate starter pinion toward engine oil filter.
- Rotate starter 1/2 turn until solenoid faces transmission, then carefully remove starter.
- Reverse procedure to install. Torque starter mounting ...
CLICK HERE TO GET FULL ACCESS TO 1997 Porsche 911 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1997 Porsche 911 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1997 Porsche 911 cars and light trucks from 1990+.
Alternator, Replace -> Installation -> Removal
Vehicle: 1997 Porsche 911 Carrera 2 3.6 H6 GAS
Removal
- Remove V-Belt cover and belt.
- Remove fan wheel from alternator/cooling fan assembly using suitable puller tool.
- Disconnect alternator electrical connector, then the alternator harness to engine ground wires, Fig. .
- Remove alternator mounting bolts and the alternator.
Installation
- Install alternator into cooling fan housing. Ensure connections for B+ and terminal D+ are positioned opposite TDC line mark (located on ed...
CLICK HERE TO GET FULL ACCESS TO 1997 Porsche 911 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1997 Porsche 911 AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1997 Porsche 911 cars and light trucks from 1990+.
Alternator, Replace -> Installation -> Removal
Vehicle: 1997 Porsche 911 Targa 3.6 H6 GAS
Removal
- Remove V-Belt cover and belt.
- Remove fan wheel from alternator/cooling fan assembly using suitable puller tool.
- Disconnect alternator electrical connector, then the alternator harness to engine ground wires, Fig. .
- Remove alternator mounting bolts and the alternator.
Installation
- Install alternator into cooling fan housing. Ensure connections for B+ and terminal D+ are positioned opposite TDC line mark (located on ed...
CLICK HERE TO GET FULL ACCESS TO 1997 Porsche 911 STARTER & ALTERNATOR REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
