Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1997 Toyota Camry car and truck
repair procedures including Toyota engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1997 Toyota Camry automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1997 Toyota Camry
- 1997 Toyota Camry LE 3.0 V6 GAS, CC:2995, Fuel Injection, Engine VIN:, Desg:F
- 1997 Toyota Camry LE 2.2 L4 GAS, CC:2164, Fuel Injection, Engine VIN:, Desg:G
- 1997 Toyota Camry XLE 3.0 V6 GAS, CC:2995, Fuel Injection, Engine VIN:, Desg:F
- 1997 Toyota Camry XLE 2.2 L4 GAS, CC:2164, Fuel Injection, Engine VIN:, Desg:G
- 1997 Toyota Camry CE 3.0 V6 GAS, CC:2995, Fuel Injection, Engine VIN:, Desg:F
- 1997 Toyota Camry CE 2.2 L4 GAS, CC:2164, Fuel Injection, Engine VIN:, Desg:G
BRAKE SERVICE PROCEDURES FOR 1997 Toyota Camry AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Toyota Camry cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> Brake Lines -> Master Cylinder
Vehicle: 1997 Toyota Camry LE 2.2 L4 GAS
Master Cylinder
- Fill reservoir with fluid.
- Disconnect tubes from master cylinder. Then slowly depress brake pedal and hold.
- Block off outlet holes with fingers, and release pedal. Repeat three or four times.
Brake Lines
Bleed wheel with longest brake line first, then work your way...
CLICK HERE TO GET FULL ACCESS TO 1997 Toyota Camry BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Toyota Camry AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Toyota Camry cars and light trucks from 1990+.
Anti-lock Brakes -> Description -> Anti-Lock Brake System -> Brake Assist (BA) System -> Traction Control System (TRAC) -> Vehicle Skid Control (VSC) System
Vehicle: 1997 Toyota Camry XLE 3.0 V6 GAS
Anti-Lock Brake System
By use of a micro-computer, this anti-lock brake system controls brake fluid pressure to prevent wheel lock. With this system, directional stability is improved and steerability maintained even at panic braking on wet, sandy, snowy or icy road conditions.
Traction Control System (TRAC)
The traction control system controls the engine torque and rear wheel br...
CLICK HERE TO GET FULL ACCESS TO 1997 Toyota Camry BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Toyota Camry AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Toyota Camry cars and light trucks from 1990+.
Drum Brakes -> Brake Service -> 2WD -> 4WD -> Camry & Camry Solara -> Celica & Corolla -> Echo & Tercel -> Inspection -> Installation -> Land Cruiser, Tundra & 4Runner -> RAV4 -> Removal -> Replacement -> Sienna -> Tacoma & T100
Vehicle: 1997 Toyota Camry CE 2.2 L4 GAS
Camry & Camry Solara
Removal
- Raise and support rear of vehicle, then remove wheel and tire assembly.
- Remove brake drum. If brake drum cannot be remove easily, insert a suitable screwdriver through hole in backing plate, then push adjuster lever away from adjuster and back of adjustment tension.
- Disconnect return spring, then remove front shoe hold-down spring, retainers and pin.
- Disconnect anchor spring, then remove front brake shoe and anchor spring, Fig. .
- Remove rear shoe hold-down spring, retainers and pin, using suitable tool, then disconnect parking brake cable from anchor plate.
- D...
CLICK HERE TO GET FULL ACCESS TO 1997 Toyota Camry BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Toyota Camry AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Toyota Camry cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Caliper Service -> 2WD -> 4Runner -> Avalon, Camry, Camry Solara, Corolla, Celica, Highlander, MR2 & Sienna -> Echo & RAV4 -> Land Cruiser -> Overhaul -> Replace -> Sequoia & Tundra -> Supra -> T100 -> Tacoma -> Tercel
Vehicle: 1997 Toyota Camry CE 2.2 L4 GAS
Avalon, Camry, Camry Solara, Corolla, Celica, Highlander, MR2 & Sienna
Replace
- Raise and support vehicle and remove front wheel.
- Remove union bolt and disconnect brake hose. Use suitable container to catch brake fluid.
- Remove caliper, Figs. through .
- Remove anti-squeal shims and brake pad wear indicator plates.
- Remove support plates.
- Reverse procedure to install.
Overhaul
- Remove caliper.
- Remove the following parts:
- Caliper slide bushings.
- Dust boots.
- Collars.
- Using screwdriver, remove caliper boot set ring and boot.
- Place suitable rag between caliper and piston and using compressed air, remov...
CLICK HERE TO GET FULL ACCESS TO 1997 Toyota Camry BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Toyota Camry AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Toyota Camry cars and light trucks from 1990+.
Anti-lock Brakes -> Precautions -> Audio Coded Anti-Theft System -> Battery Ground Cable
Vehicle: 1997 Toyota Camry XLE 2.2 L4 GAS
Audio Coded Anti-Theft System
Some models are equipped with an audio coded anti-theft system that will disable the radio when the battery cable is disconnected. The system can be identified by the "ANTI-THEFT SYSTEM" on the cassette lid. Obtain 3 digit code for input. Reset system after service as follows:
- Obtain 3 digit audio theft code.
- Depress 1 (PROG) while depressing righthand side of TUNE SEEK button,- - - will appear in tape operation display.
- To enter the first digit, depress 1 (PROG) button repeatedly until the number of times depressed equals the first digit (depress the 1 butto...
CLICK HERE TO GET FULL ACCESS TO 1997 Toyota Camry BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1997 Toyota Camry AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1997 Toyota Camry cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Caliper Service -> 2WD -> 4Runner -> Avalon, Camry, Camry Solara, Corolla, Celica, Highlander, MR2 & Sienna -> Echo & RAV4 -> Land Cruiser -> Overhaul -> Replace -> Sequoia & Tundra -> Supra -> T100 -> Tacoma -> Tercel
Vehicle: 1997 Toyota Camry XLE 2.2 L4 GAS
Avalon, Camry, Camry Solara, Corolla, Celica, Highlander, MR2 & Sienna
Replace
- Raise and support vehicle and remove front wheel.
- Remove union bolt and disconnect brake hose. Use suitable container to catch brake fluid.
- Remove caliper, Figs. through .
- Remove anti-squeal shims and brake pad wear indicator plates.
- Remove support plates.
- Reverse procedure to install.
Overhaul
- Remove caliper.
- Remove the following parts:
- Caliper slide bushings.
- Dust boots.
- Collars.
- Using screwdriver, remove caliper boot set ring and boot.
- Place suitable rag between caliper and piston and using compressed air, remov...
CLICK HERE TO GET FULL ACCESS TO 1997 Toyota Camry BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1997 Toyota Camry vehicle.
|
| Access the Complete guide! |
