Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1998 Acura CL car and truck
repair procedures including Acura engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1998 Acura CL automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1998 Acura CL
- 1998 Acura CL 3.0 V6 GAS, CC:2997, Fuel Injection
- 1998 Acura CL 2.3 L4 GAS, CC:2254, Fuel Injection
BRAKE SERVICE PROCEDURES FOR 1998 Acura CL AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Acura CL cars and light trucks from 1990+.
Disc Brakes -> Precautions -> Radio Coded Theft Protection System
Vehicle: 1998 Acura CL 2.3 L4 GAS
Radio Coded Theft Protection System
Anti-theft radios have a coded theft protection circuit. The security code number must be obtained before disconnecting battery, removing radio fuse or ...
CLICK HERE TO GET FULL ACCESS TO 1998 Acura CL BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Acura CL AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Acura CL cars and light trucks from 1990+.
Power Brake Units -> Power Brake Unit Service
Vehicle: 1998 Acura CL 3.0 V6 GAS
Do not disassemble brake boost...
CLICK HERE TO GET FULL ACCESS TO 1998 Acura CL BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Acura CL AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Acura CL cars and light trucks from 1990+.
Anti-lock Brakes -> Description
Vehicle: 1998 Acura CL 2.3 L4 GAS
The anti-lock brake system modulates pressure of brake fluid to each caliper whenever wheels are likely to be locked due to excessive braking. This prevents locking of the wheels and allows for better handling of vehicle.
The anti-lock brake control unit receives input from individual speed sensors located at each wheel and from the ABS pressure switch. The anti-lock brake control unit uses inputs to control the modulator unit, which adjusts hydraulic pressure applied to each caliper o...
CLICK HERE TO GET FULL ACCESS TO 1998 Acura CL BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Acura CL AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Acura CL cars and light trucks from 1990+.
Disc Brakes -> Tightening Specifications
Vehicle: 1998 Acura CL 2.3 L4 GAS
CLICK HERE TO GET FULL ACCESS TO 1998 Acura CL BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Acura CL AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Acura CL cars and light trucks from 1990+.
Anti-lock Brakes -> System Service -> Accumulator Pressure Switch -> Accumulator/Line Pressure Relief -> Brake System Bleed -> CL -> CL, RL & TL -> Component Replacement -> Control Unit -> Integra -> Modulator Unit Bleed -> Modulator Unit Fluid, Replace -> RL -> TL -> Wheel Sensor
Vehicle: 1998 Acura CL 2.3 L4 GAS
Brake System Bleed
Modulator Unit Fluid, Replace
CL, RL & TL
- Remove bleeder cap from the maintenance bleeder on modulator.
- Connect rubber hose to the maintenance bleeder, place other end in suitable container.
- Loosen maintenance bleeder 1/8 to 1/4 turn to collect fluid in container, Fig. . Do not loosen maintenance bleeder more than 1/4 turn, brake fluid is under high pressure.
- Tighten maintenance bleeder.
- Start engine and allow to idle for one minute, then check fluid level
- Repeat steps three through five several times in order to drain remaining fluid from modulator.
- Tighten maintenance...
CLICK HERE TO GET FULL ACCESS TO 1998 Acura CL BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Acura CL AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Acura CL cars and light trucks from 1990+.
Disc Brakes -> Adjustments -> Brake Pedal Height -> Parking Brake
Vehicle: 1998 Acura CL 2.3 L4 GAS
Brake Pedal Height
- Loosen locknut and back brake light switch off until it breaks contact with brake pedal.
- Loosen pushrod locknut, then turn pushrod in or out until to adjust pedal height to specifications, Fig. .
- Turn in brake light switch until plunger is fully depressed. Back switch off 1/4 turn and tighten locknut.
- With engine stopped, ensure brake pedal freeplay is within specifications, Fig. .
- Ensure brake lamps go out with brake pedal released.
Parking Brake
After servicing rear brakes, depress brake pedal sever...
CLICK HERE TO GET FULL ACCESS TO 1998 Acura CL BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1998 Acura CL vehicle.
|
| Access the Complete guide! |
