Auto Parts Search
BRAKE SERVICE PROCEDURES FOR 1998 BMW 740I AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 BMW 740I cars and light trucks from 1990+.
Anti-lock Brakes -> System Service -> 1998 -> 1999-2000 -> 323Ci, 325, 328Ci & 330 & 2000 323i & 328i & 1999 323i & 328i Sedans -> Brake System Bleed -> Component Replacement -> Control Unit -> Front Speed Sensor -> Hydraulic Unit -> M3, Z3, 318, 323, 325, 328 & 330 -> M5, 525, 528, 530, 540, 740 & 750 -> Rear Speed Sensor -> X5 -> Z3, 318, 323is & 328is & 1998-99 M3, 328i & 1998 323i & 1999 323i & 328i Convertibles
Vehicle: 1998 BMW 740I 4.4 V8 GAS
Brake System Bleed
Refer to "Hydraulic Brake Systems," for procedures.
Component Replacement
Hydraulic Unit
M3, Z3, 318, 323, 325, 328 & 330
Z3, 318, 323is & 328is & 1998-99 M3, 328i & 1998 323i & 1999 323i & 328i Convertibles
- Ensure ignition switch is in Off position.
- Remove Mass Air Flow (MAF) sensor from air filter housing.
- Disconnect cruise control drive motor as required.
- Remove brake fluid from master cylinder using suitable syringe.
- Disconnect central connector.
- Mark brake lines for installation alignment.
- Disconnect brake lines at master cylinder and hydraulic control unit.
- Disconnect s...
CLICK HERE TO GET FULL ACCESS TO 1998 BMW 740I BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 BMW 740I AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 BMW 740I cars and light trucks from 1990+.
Anti-lock Brakes -> Precautions -> Battery Ground Cable
Vehicle: 1998 BMW 740I 4.4 V8 GAS
Battery Ground Cable
Prior to service, dis...
CLICK HERE TO GET FULL ACCESS TO 1998 BMW 740I BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 BMW 740I AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 BMW 740I cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> 323Ci, 325, 328Ci & 330 & 2000 323i & 328i & 1999 323i & 328i Sedans -> 740 & 750 -> M3, Z3, 318, 3232, 325, 328 & 330 -> M5, 525, 528, 530 & 540 -> Master Cylinder, Replace -> X5 -> Z3, 318, 323is & 328is & 1998-99 M3, 328i & 1998 323i & 1999 323i & 328i Convertibles
Vehicle: 1998 BMW 740I 4.4 V8 GAS
Master Cylinder, Replace
M3, Z3, 318, 3232, 325, 328 & 330
Z3, 318, 323is & 328is & 1998-99 M3, 328i & 1998 323i & 1999 323i & 328i Convertibles
- Remove brake fluid from master cylinder using suitable syringe.
- Remove mounting bolt.
- Disconnect reservoir from master cylinder by titling to side.
- Plug master cylinder connections.
- Disconnect brake lines, then plug bores and lines.
- Remove mounting nuts and master cylinder.
- Remove plug and clutch hose, as required.
- Reverse procedure to install, noting the following:
- Install new mounting nuts and seal.
- Coat sealing rings with suitable brake fl...
CLICK HERE TO GET FULL ACCESS TO 1998 BMW 740I BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 BMW 740I AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 BMW 740I cars and light trucks from 1990+.
Disc Brakes -> Adjustments -> Parking Brake
Vehicle: 1998 BMW 740I 4.4 V8 GAS
Parking Brake
- Ensure parking brake lever is fully released and cables operate freely, then raise and support vehicle.
- Remove one wheel bolt from each wheel.
- Rotate wheel until bolt hole is aligned with adjustment screw.
- Turn adjusting screw until wheel can no longer turn.
- On 1998-99 M3, 740 and 750 models, loosen adjusting screw eight notches.
- On 323Ci, 325, 328Ci and 330 and 2000 323i and 328i and 1999 323i and 328i Sedan m...
CLICK HERE TO GET FULL ACCESS TO 1998 BMW 740I BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 BMW 740I AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 BMW 740I cars and light trucks from 1990+.
Disc Brakes -> Caliper Service -> Assemble -> Disassemble -> Front -> Inspection -> Overhaul -> Rear -> Replace
Vehicle: 1998 BMW 740I 4.4 V8 GAS
Replace
Front
- Raise and support vehicle, then remove front tire and wheel.
- Press and hold brake pedal with suitable prop.
- Disconnect brake pipe from connection with hose.
- Remove wear indicator connector from lefthand side.
- Remove mounting bolts and caliper.
- Reverse procedure to install, noting the following:
- Tighten mounting bolts to specifications.
- Bleed brake system.
- Ensure brake pad wear sensor wire does not contact rotor or wheel.
Rear
- Raise and support vehicle, then remove rear tire and wheel assembly.
- Drain moderate amount of brake fluid from reservoir using suitable syringe.
- Disconnect...
CLICK HERE TO GET FULL ACCESS TO 1998 BMW 740I BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 BMW 740I AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 BMW 740I cars and light trucks from 1990+.
Power Brake Units -> Precautions -> Battery Ground Cable
Vehicle: 1998 BMW 740I 4.4 V8 GAS
Battery Ground Cable
Prior to service, dis...
CLICK HERE TO GET FULL ACCESS TO 1998 BMW 740I BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1998 BMW 740I vehicle. |
Access the Complete guide! |