Auto Parts Search
We have info for following modifications of 1998 Dodge Dakota
- 1998 Dodge Dakota 3.9 V6 GAS, CID:239, Fuel Injection, Aspiration:239, Engine VIN:, Desg:X
- 1998 Dodge Dakota 5.2 V8 GAS, CID:318, Fuel Injection, Aspiration:318, Engine VIN:, Desg:Y
- 1998 Dodge Dakota 5.9 V8 GAS, CID:360, Fuel Injection, Aspiration:360, Engine VIN:, Desg:Z
- 1998 Dodge Dakota 2.5 L4 GAS, CC:2507, CID:153, Fuel Injection, Aspiration:153, Engine VIN:, Desg:P
SERPENTINE BELT SERVICE PROCEDURES FOR 1998 Dodge Dakota AUTOMOBILES
Serpentine belt replacement procedures with corresponding images for most domestic and imported 1998 Dodge Dakota cars and light trucks sold in the U.S. from 1990+.
Serpentine Drive Belt, Replace -> Installation -> Removal
Vehicle: 1998 Dodge Dakota 3.9 V6 GAS
Removal
- Attach a suitable wrench to automatic tensioner pulley mounting bolt
- Rotate tensioner assembly clockwise until tension has been relieved.
- Remove belt from idler puller, then from vehicle.
Installation
Serpentine belt must be routed correctly. If routed incorrectly water pump will rotate...
CLICK HERE TO GET FULL ACCESS TO 1998 Dodge Dakota SERPENTINE BELT SERVICE PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 1998 Dodge Dakota AUTOMOBILES
Serpentine belt replacement procedures with corresponding images for most domestic and imported 1998 Dodge Dakota cars and light trucks sold in the U.S. from 1990+.
Serpentine Drive Belt, Replace
Vehicle: 1998 Dodge Dakota 2.5 L4 GAS
- Rotate or lift the belt tensioner arm, using a suitable tool to relieve tension from dr...
CLICK HERE TO GET FULL ACCESS TO 1998 Dodge Dakota SERPENTINE BELT SERVICE PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 1998 Dodge Dakota AUTOMOBILES
Serpentine belt replacement procedures with corresponding images for most domestic and imported 1998 Dodge Dakota cars and light trucks sold in the U.S. from 1990+.
Serpentine Drive Belt, Replace -> Installation -> Removal
Vehicle: 1998 Dodge Dakota 5.2 V8 GAS
Removal
- Attach a suitable wrench to automatic tensioner pulley mounting bolt
- Rotate tensioner assembly clockwise until tension has been relieved.
- Remove belt from idler puller, then from vehicle.
Installation
Serpentine belt must be routed correctly. If routed incorrectly water pump will rotate...
CLICK HERE TO GET FULL ACCESS TO 1998 Dodge Dakota SERPENTINE BELT SERVICE PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 1998 Dodge Dakota AUTOMOBILES
Serpentine belt replacement procedures with corresponding images for most domestic and imported 1998 Dodge Dakota cars and light trucks sold in the U.S. from 1990+.
Serpentine Drive Belt, Replace -> Installation -> Removal
Vehicle: 1998 Dodge Dakota 5.9 V8 GAS
Removal
The automatic tensioner is equipped with an indexing arrow on the back of tensioner housing. If a new belt is being installed, arrow must be within approximately 1/8 inch of indexing mark. If an old belt is being used, it must not pass the indexing point.
- Attach a suitable wrench to automatic tensioner pulley mounting bolt.
- Rotate tensioner assembly clockwise until tension has been relieved.
- Remove belt from idler puller...
CLICK HERE TO GET FULL ACCESS TO 1998 Dodge Dakota SERPENTINE BELT SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1998 Dodge Dakota vehicle. |
Access the Complete guide! |