Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1998 Porsche 911 car and truck
repair procedures including Porsche engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1998 Porsche 911 automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1998 Porsche 911
- 1998 Porsche 911 Targa 3.6 H6 GAS, CC:3606, Fuel Injection, Engine VIN:, Desg:A
- 1998 Porsche 911 Carrera 2 3.6 H6 GAS, CC:3606, Fuel Injection, Engine VIN:, Desg:A
- 1998 Porsche 911 Carrera 4 3.6 H6 GAS, CC:3606, Fuel Injection, Engine VIN:, Desg:A
- 1998 Porsche 911 Carrera 4S 3.6 H6 GAS, CC:3606, Fuel Injection, Engine VIN:, Desg:A
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Porsche 911 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1998 Porsche 911 cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1998 Porsche 911 Targa 3.6 H6 GAS
- Remove center console.
- Raise and support vehicle.
- Remove underside panels.
- Remove fit bolt for gearshift rod coupling.
- Lift guide tube off ball joint.
- Remove shift lever with gearshift rod and guide tube.
- Remove front axle final drive.
- Completely unscrew two mounting screws of clamping sleeve and push it forwards on central tube.
- Apply flat steel parts to support central tube.
- Unscrew manual tr...
CLICK HERE TO GET FULL ACCESS TO 1998 Porsche 911 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Porsche 911 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1998 Porsche 911 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1998 Porsche 911 Carrera 2 3.6 H6 GAS
- Loosen driveshaft to wheel hub retaining nut while applying brakes.
- Raise and support vehicle, then remove wheel and tire assembly.
- Remove underside panel, then brake cooling duct from control arm.
- Remove stabilizer arm from wheel carrier.
- Separate ball joint from wheel carrier.
- Remove drivesha...
CLICK HERE TO GET FULL ACCESS TO 1998 Porsche 911 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Porsche 911 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1998 Porsche 911 cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1998 Porsche 911 Carrera 2 3.6 H6 GAS
- Remove center console.
- Raise and support vehicle.
- Remove underside panels.
- Remove fit bolt for gearshift rod coupling.
- Lift guide tube off ball joint.
- Remove shift lever with gearshift rod and guide tube.
- Remove front axle final drive.
- Completely unscrew two mounting screws of clamping sleeve and push it forwards on central tube.
- Apply flat steel parts to support central tube.
- Unscrew manual tr...
CLICK HERE TO GET FULL ACCESS TO 1998 Porsche 911 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Porsche 911 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1998 Porsche 911 cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1998 Porsche 911 Carrera 4S 3.6 H6 GAS
- Remove center console.
- Raise and support vehicle.
- Remove underside panels.
- Remove fit bolt for gearshift rod coupling.
- Lift guide tube off ball joint.
- Remove shift lever with gearshift rod and guide tube.
- Remove front axle final drive.
- Completely unscrew two mounting screws of clamping sleeve and push it forwards on central tube.
- Apply flat steel parts to support central tube.
- Unscrew manual tr...
CLICK HERE TO GET FULL ACCESS TO 1998 Porsche 911 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Porsche 911 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1998 Porsche 911 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1998 Porsche 911 Carrera 4 3.6 H6 GAS
- Loosen driveshaft to wheel hub retaining nut while applying brakes.
- Raise and support vehicle, then remove wheel and tire assembly.
- Remove underside panel, then brake cooling duct from control arm.
- Remove stabilizer arm from wheel carrier.
- Separate ball joint from wheel carrier.
- Remove drivesha...
CLICK HERE TO GET FULL ACCESS TO 1998 Porsche 911 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Porsche 911 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1998 Porsche 911 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1998 Porsche 911 Targa 3.6 H6 GAS
- Loosen driveshaft to wheel hub retaining nut while applying brakes.
- Raise and support vehicle, then remove wheel and tire assembly.
- Remove underside panel, then brake cooling duct from control arm.
- Remove stabilizer arm from wheel carrier.
- Separate ball joint from wheel carrier.
- Remove drivesha...
CLICK HERE TO GET FULL ACCESS TO 1998 Porsche 911 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
