Auto Parts Search
We have info for following modifications of 1998 Subaru Forester
- 1998 Subaru Forester 2.5 H4 GAS, CC:2458, Fuel Injection, Engine VIN:, Desg:6
- 1998 Subaru Forester L 2.5 H4 GAS, CC:2458, Fuel Injection, Engine VIN:, Desg:6
- 1998 Subaru Forester S 2.5 H4 GAS, CC:2458, Fuel Injection, Engine VIN:, Desg:6
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Subaru Forester AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1998 Subaru Forester cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 1998 Subaru Forester S 2.5 H4 GAS
Front
- Disconnect battery ground cable.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Unstake hub nut using suitable tool.
- Remove driveshaft locknut from front hub while depressing brake pedal. Remove wheel before loosening axle nut.
- Remove stabilizer link from front arm.
- Remove brake caliper bolts and support caliper to strut housing using mechanics wire.
- Remove disc brake rotor. If brake rotor is difficult to remove, drive 8mm bolt into threaded end of rotor, then remove the rotor. Reference mark surface of h...
CLICK HERE TO GET FULL ACCESS TO 1998 Subaru Forester DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Subaru Forester AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1998 Subaru Forester cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1998 Subaru Forester 2.5 H4 GAS
Wrap metal parts with a cloth or rubber material. Rubber boot may be damaged due to interference with adjacent metal parts during removal.
- Disconnect battery ground cable.
- Place vehicle in neutral.
- Release parking brake.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove differential mount front exhaust cover bolts, then cover.
- Place reference mark on front driveline and rear differential flange. Paint is recommended for match marks. Never damage rear driveline shaft flange yoke or companion flange
- Remove bolts and then remove driveline from rea...
CLICK HERE TO GET FULL ACCESS TO 1998 Subaru Forester DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Subaru Forester AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1998 Subaru Forester cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 1998 Subaru Forester 2.5 H4 GAS
Front
- Disconnect battery ground cable.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Unstake hub nut using suitable tool.
- Remove driveshaft locknut from front hub while depressing brake pedal. Remove wheel before loosening axle nut.
- Remove stabilizer link from front arm.
- Remove brake caliper bolts and support caliper to strut housing using mechanics wire.
- Remove disc brake rotor. If brake rotor is difficult to remove, drive 8mm bolt into threaded end of rotor, then remove the rotor. Reference mark surface of h...
CLICK HERE TO GET FULL ACCESS TO 1998 Subaru Forester DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Subaru Forester AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1998 Subaru Forester cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1998 Subaru Forester S 2.5 H4 GAS
Wrap metal parts with a cloth or rubber material. Rubber boot may be damaged due to interference with adjacent metal parts during removal.
- Disconnect battery ground cable.
- Place vehicle in neutral.
- Release parking brake.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove differential mount front exhaust cover bolts, then cover.
- Place reference mark on front driveline and rear differential flange. Paint is recommended for match marks. Never damage rear driveline shaft flange yoke or companion flange
- Remove bolts and then remove driveline from rea...
CLICK HERE TO GET FULL ACCESS TO 1998 Subaru Forester DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Subaru Forester AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1998 Subaru Forester cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1998 Subaru Forester L 2.5 H4 GAS
Wrap metal parts with a cloth or rubber material. Rubber boot may be damaged due to interference with adjacent metal parts during removal.
- Disconnect battery ground cable.
- Place vehicle in neutral.
- Release parking brake.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove differential mount front exhaust cover bolts, then cover.
- Place reference mark on front driveline and rear differential flange. Paint is recommended for match marks. Never damage rear driveline shaft flange yoke or companion flange
- Remove bolts and then remove driveline from rea...
CLICK HERE TO GET FULL ACCESS TO 1998 Subaru Forester DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1998 Subaru Forester AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1998 Subaru Forester cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 1998 Subaru Forester L 2.5 H4 GAS
Front
- Disconnect battery ground cable.
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Unstake hub nut using suitable tool.
- Remove driveshaft locknut from front hub while depressing brake pedal. Remove wheel before loosening axle nut.
- Remove stabilizer link from front arm.
- Remove brake caliper bolts and support caliper to strut housing using mechanics wire.
- Remove disc brake rotor. If brake rotor is difficult to remove, drive 8mm bolt into threaded end of rotor, then remove the rotor. Reference mark surface of h...
CLICK HERE TO GET FULL ACCESS TO 1998 Subaru Forester DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1998 Subaru Forester vehicle. |
Access the Complete guide! |