Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1998 Suzuki Swift car and truck
repair procedures including Suzuki engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1998 Suzuki Swift automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1998 Suzuki Swift
- 1998 Suzuki Swift DLX 1.3 L4 GAS, CC:1298, CID:79, Fuel Injection, Aspiration:79, Engine VIN:, Desg:2
- 1998 Suzuki Swift GA 1.3 L4 GAS, CC:1298, CID:79, Fuel Injection, Aspiration:79, Engine VIN:, Desg:2
BRAKE SERVICE PROCEDURES FOR 1998 Suzuki Swift AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Suzuki Swift cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> Esteem & Swift -> Grand Vitara, Sidekick, Vitara & X-90 -> Master Cylinder -> System Bleed
Vehicle: 1998 Suzuki Swift DLX 1.3 L4 GAS
Brake fluid is extremely damaging to paint. If fluid should accidentally touch painted surface, immediately wipe fluid from paint and clean painted surface.
System Bleed
Esteem & Swift
The hydraulic lines of the brake system are based on a diagonal split system. When a brake line or hose is disconnected, bleeding operation must be performed at both ends of the line disconnected.
- Fill master cylinder reservoir. Reservoir should be kept at least half full during bleeding operation.
- Remove bleeder plug cap, then attach vinyl tube to bleeder plug of component to be bled. Insert other ...
CLICK HERE TO GET FULL ACCESS TO 1998 Suzuki Swift BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Suzuki Swift AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Suzuki Swift cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service -> Master Cylinder Overhaul
Vehicle: 1998 Suzuki Swift DLX 1.3 L4 GAS
Master Cylinder Overhaul
- Remove master cylinder as outlined under "Master Cylinder, Replace."
- Remove circlip, then the primary piston.
- Remove pisto...
CLICK HERE TO GET FULL ACCESS TO 1998 Suzuki Swift BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Suzuki Swift AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Suzuki Swift cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> Master Cylinder
Vehicle: 1998 Suzuki Swift DLX 1.3 L4 GAS
Master Cylinder
- Clean any dirt from around reservoir cap. Remove cap, then drain brake fluid into appropriate container.
- Remove reservoir connector screw, Fig. , then the reservoir.
- Disconnect brake lines from master cylinder. Do not allow brake fluid to get on painted surfaces.
- Remove master cylinder attaching bolts, then the master cylinder.
- Adjust clearance of booster piston rod to master cylinder piston as follows:
- Push piston rod several times to ensure reaction disc is in place.
- Measure with gasket in place on master cylinder and booster at atmospheric pressure.
- Set measurin...
CLICK HERE TO GET FULL ACCESS TO 1998 Suzuki Swift BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Suzuki Swift AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Suzuki Swift cars and light trucks from 1990+.
Hydraulic Brake Systems -> Adjustments -> Brake Pedal Height -> Brake Pedal Travel Inspection
Vehicle: 1998 Suzuki Swift DLX 1.3 L4 GAS
Brake Pedal Height
The brake pedal should be at the same height as clutch pedal. Ensure distance between brake booster mounting surface (with gasket) and pushrod clevis pin hole is as follows:
- On Esteem and Swift models, 4.51-4.54 inches (114.5-115.5 mm).
- On Grand Vitara and Vitara models, 7.60-7.99 inches (193-203 mm) for 1999 and 8.19-8.58 inches (208-218) for 2000-02.
- On Sidekick and X-90 models, 6.60-6.64 inches (167.6-168.6 mm)
Brake Pedal Travel Inspection
- Start engine, then depress brake pedal a few times.
- Apply ap...
CLICK HERE TO GET FULL ACCESS TO 1998 Suzuki Swift BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Suzuki Swift AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Suzuki Swift cars and light trucks from 1990+.
Drum Brakes -> Adjustments -> Parking Brake -> Service Brake
Vehicle: 1998 Suzuki Swift DLX 1.3 L4 GAS
Parking Brake
- Parking brake lever should be adjusted as follows:
- On Esteem models, 3-5 notches.
- On Grand Vitara, Sidekick, Vitara and X-90 models, 5-7 notches.
- On Swift models, 4-9 notches.
- On all models, lever should be adjusted with 44 lbs. of pull applied, Fig. .
- Adjust travel by loosening self lock...
CLICK HERE TO GET FULL ACCESS TO 1998 Suzuki Swift BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1998 Suzuki Swift AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1998 Suzuki Swift cars and light trucks from 1990+.
Anti-lock Brakes -> Troubleshooting
Vehicle: 1998 Suzuki Swift DLX 1.3 L4 GAS
Refer to "Diagnosis & T... "
CLICK HERE TO GET FULL ACCESS TO 1998 Suzuki Swift BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
