Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1998 Toyota Celica car and truck
repair procedures including Toyota engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1998 Toyota Celica automobile. Try the Automotix DIY solution today!
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1998 Toyota Celica AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1998 Toyota Celica cars and light trucks from 1990+.
Starter, Replace
Vehicle: 1998 Toyota Celica GT 2.2 L4 GAS
- Remove air cleaner case assembly as follows:
- Disconnect air intake temperature sensor connector.
- Disconnect four air cleaner cap clips.
- Disconnect air cleaner hose from throttle body and remove air cleaner cap and filter element.
- Remove three air cleaner case retaining bolts, then case.
- Remove engine compartment relay box as follows:
- Remove two relay box retaining nuts and disconnect relay box from battery.
- Remove lower cover f...
CLICK HERE TO GET FULL ACCESS TO 1998 Toyota Celica STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1998 Toyota Celica AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1998 Toyota Celica cars and light trucks from 1990+.
Alternator, Replace -> With Air Conditioning -> Without Air Conditioning
Vehicle: 1998 Toyota Celica GT 2.2 L4 GAS
With Air Conditioning
- Disconnect wire from clamp on rear end cover.
- Disconnect alternator connector.
- Remove rubber cap and nut, and disconnect alternator wire.
- Loosen adjusting lock bolt and pivot bolt.
- Remove drive belt.
- Remove adjusting lock bolt and pivot bolt.
- Remove alternator from vehicle.
- Reverse procedure to install, noting the following:
- Torque pivot bolt to 40 ft. lbs.
- Torque adjusting lock bolt or adjusting bolt to 14 ft. lbs.
- Torque B+ terminal nut to 87 inch lbs.
- Torque battery negative cable nut to...
CLICK HERE TO GET FULL ACCESS TO 1998 Toyota Celica STARTER & ALTERNATOR REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |



