Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1999 Chrysler Concorde car and truck
repair procedures including Chrysler engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1999 Chrysler Concorde automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1999 Chrysler Concorde
- 1999 Chrysler Concorde 2.7 V6 GAS, CC:2700, CID:167, Fuel Injection, Aspiration:167, Engine VIN:, Desg:R
- 1999 Chrysler Concorde 3.2 V6 GAS, CC:3200, CID:197, Fuel Injection, Aspiration:197, Engine VIN:, Desg:J
BRAKE SERVICE PROCEDURES FOR 1999 Chrysler Concorde AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Chrysler Concorde cars and light trucks from 1990+.
Anti-lock Brakes -> Teves Anti-Lock Braking System -> System Service -> 1999 -> 1999 Neon -> 1999-2000 -> 1999-2000 Sebring Convertible & Stratus -> 2000-03 -> 2000-03 Neon -> 2001-03 -> 2001-03 Sebring Convertible, Sebring Sedan & Stratus Sedan -> Brake System Bleed -> Breeze & Cirrus -> Component Replacement -> Concorde, Intrepid, LHS & 300M -> Controller Anti-Lock Brake (CAB) -> Front -> Integrated Control Unit (ICU) -> Neon -> Rear -> Sebring Convertible, Sebring Sedan & Stratus Sedan -> Wheel Speed Sensor
Vehicle: 1999 Chrysler Concorde 3.2 V6 GAS
Brake System Bleed
The TEVES Mark 20e anti-lock brake system must be bled as two independent braking systems. The non-ABS portion of the brake system should be bled the same as any non-ABS system. The ABS portion of the system requires the use of a DRB, or equivalently programmed scan tool.
- To bleed non-ABS portion of system, refer to "Hydraulic Brakes."
- To bleed the ABS portion of the system, connect DRB scan tool to vehicle diagnostics connector, located under the lefthand side of instrument panel.
- Set can tool to Bleed ABS routine.
- Apply brake pedal firmly and initiate Bleed ABS cycl...
CLICK HERE TO GET FULL ACCESS TO 1999 Chrysler Concorde BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Chrysler Concorde AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Chrysler Concorde cars and light trucks from 1990+.
Disc Brakes -> Type 5 -> Parking Brake Service -> Concorde, Intrepid & 300M -> LHS & Neon -> Parking Brake Shoes, Replace
Vehicle: 1999 Chrysler Concorde 2.7 V6 GAS
Parking Brake Shoes, Replace
Concorde, Intrepid & 300M
- Remove rear disc brake caliper assembly, as outlined under "Caliper Service," from adapter and rotor.
- Remove rear rotor from hub, then dust cap.
- Remove cotter pin, nut retainer, wave washer and rear hub/bearing assembly retaining nut and washer from rear spindle.
- Remove rear hub and bearing assembly from rear spindle.
- Turn brake shoe adjuster wheel until adjuster is at shortest length.
- Remove adjuster assembly from parking brake assembly.
- Pull front parking brake shoe away from anchor pin, then remove front parking brake shoe an...
CLICK HERE TO GET FULL ACCESS TO 1999 Chrysler Concorde BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Chrysler Concorde AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Chrysler Concorde cars and light trucks from 1990+.
Hydraulic Brake Systems -> Description -> Master Cylinder
Vehicle: 1999 Chrysler Concorde 3.2 V6 GAS
Master Cylinder
The master cylinder is a center valve master cylinder used for all applications. The brake fluid reservoir mounted on top and brake fluid level switch is mounted on the side of the reservoir.
The reservoir is indexed to prevent installation in the wrong direction. The cap diaphragm is slit to allow atmospheric pressure to equalize on both sides of diaphragm.
The primary and secondary outlet tubes of the master cylinder are connected to a junction block on non-ABS equipped vehicles. The master cylinder primary ...
CLICK HERE TO GET FULL ACCESS TO 1999 Chrysler Concorde BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Chrysler Concorde AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Chrysler Concorde cars and light trucks from 1990+.
Power Brake Units -> Description -> Operation -> System
Vehicle: 1999 Chrysler Concorde 2.7 V6 GAS
System
These units are of the vacuum suspended type. Some units are of the single diaphragm type, while others are of the tandem diaphragm type, both single piston and double piston or split system type master cylinders are used.
The vacuum suspended diaphragm type units utilize engine manifold vacuum and atmospheric pressure for its power. It consists of three basic elements combined into a single power unit. The three basic elements of the single diaphragm type are:
- A vacuum power section which includes a front and rear shell, a power diaphragm, a return spring and a pushrod.
- A contro...
CLICK HERE TO GET FULL ACCESS TO 1999 Chrysler Concorde BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Chrysler Concorde AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Chrysler Concorde cars and light trucks from 1990+.
Disc Brakes -> Type 5 -> Troubleshooting -> Lateral Runout Inspection -> Parallelism Inspection
Vehicle: 1999 Chrysler Concorde 3.2 V6 GAS
Lateral Runout Inspection
Refer to "Disc Brake Specifications" for runout specifications.
- Raise and support vehicle, then remove wheels.
- If applicable, ensure wheel bearings are properly adjusted.
- Install lug nuts or bolts using suitable spacers.
- Mount a dial indicator to vehicle, then position dial indicator plunger so it contacts rotor at a point one inch from outer edge.
- Rotate rotor and note dial indicator readings. Perform this inspection on both inboard an...
CLICK HERE TO GET FULL ACCESS TO 1999 Chrysler Concorde BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Chrysler Concorde AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Chrysler Concorde cars and light trucks from 1990+.
Power Brake Units -> Power Brake Unit Service -> Power Booster, Replace
Vehicle: 1999 Chrysler Concorde 3.2 V6 GAS
Power Booster, Replace
Avenger & Sebring Coupe
1999-2000
Refer to Figs. for power booster replacement procedures.
Breeze, Cirrus, Stratus & Sebring Convertible
1999-2000
2.0L & 2.4L Engines
- Remove remote ground cable from stud located on lefthand strut tower, then remove wiring harness connector from speed control servo.
- Remove two speed control servo mounting bracket nuts, then move speed control servo out of way. Do not remove speed control cable from servo.
- Remove vacuum harness connector and electrical connector from purge control solenoid.
- Remove purge control soleno...
CLICK HERE TO GET FULL ACCESS TO 1999 Chrysler Concorde BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1999 Chrysler Concorde vehicle.
|
| Access the Complete guide! |
