Auto Parts Search
1999 Daewoo Leganza CAR/TRUCK REPAIR PROCEDURES AND DIAGRAMS - WHAT Daewoo REPAIR SHOPS DON'T WANT YOU TO KNOW
Learn how to repair a car or truck, install or remove parts, wire an engine, reset warning lights, replace fuel filter, fix auto body and more. Get Automotix DIY!Select Section
- Component Locations
- Wiring Diagrams
- Technical Service Bulletins
- Specifications
- A/C & Heater Service
- Brake Service
- Fuel Filter Replacement
- Driveline, U-Joint & CV Axles Replacement
- Starter & Alternator Replacement
- Cabin Air Filter Locations & Replacement
- Maintenance Lamp Reset
- Radiator & Hose Replacement
- Serpentine Belt Service

A/C & HEATER SERVICE PROCEDURES FOR 1999 Daewoo Leganza AUTOMOBILES
Computer Relearn Procedures -> Daewoo
Vehicle: 1999 Daewoo Leganza 2.2 L4 GAS
If the battery ground cable has been disconnected and isolated, the following "Idle Learn" procedure will be required after cable connection:
- Turn ignition On for five seconds.
- Turn ignition Off for 10 seconds.
- Turn ignition On for five seconds.
- On models equipped with automatic transaxle, place selector lever in Park.
- On models equipped with manual transaxle, apply ...
CLICK HERE TO GET FULL ACCESS TO 1999 Daewoo Leganza A/C & HEATER SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Daewoo Leganza AUTOMOBILES
Drum Brakes -> Brake Service -> Drum, Replace -> One-Piece -> Two-Piece
Vehicle: 1999 Daewoo Leganza 2.2 L4 GAS
Drum, Replace
One-Piece
- Raise and support vehicle.
- Remove wheel and tire.
- Remove drum to spindle split pin and castle nut. Discard split pin.
- Remove drum.
- Reverse procedure to install, noting the following:
- Inspect hub bearing, then pack with wheel bearing grease part No. 1051344, or equivalent.
- Inspect drum for scoring and cracks and replace as required.
- Measure drum and compare findings to "Drum Brake Specifications" chart.
- Install brake drum and secure with castle nut.
- On Nubira and 1999-2000 Lanos models, torque castle nut to 15 ft. lbs....
CLICK HERE TO GET FULL ACCESS TO 1999 Daewoo Leganza BRAKE SERVICE PROCEDURES
FUEL FILTER REPLACEMENT PROCEDURES FOR 1999 Daewoo Leganza AUTOMOBILES
Daewoo -> Fuel Filter Replacement -> All Models -> Fuel System Pressure Relief -> Installation -> Removal
Vehicle: 1999 Daewoo Leganza 2.2 L4 GAS
Do not smoke or allow an open flame of any type when working on or near any fuel system related components. The highly flammable vapor mixtures may ignite, resulting in serious personal injury.
Prior to disconnecting fuel lines, the fuel system pressure must be relieved to prevent accidental spray of fuel.
After the battery has been disconnected and reconnected, some abnormal driveability symptoms may occur. The vehicle may need to be driven 10 miles or more while it relearns its adaptive strategy.
Fuel System Pressure Relief
- Remove the fuel tank filler cap.
- On Lanos models, remove the fu...
CLICK HERE TO GET FULL ACCESS TO 1999 Daewoo Leganza FUEL FILTER REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1999 Daewoo Leganza AUTOMOBILES
CV AXLE SHAFT, Replace
Vehicle: 1999 Daewoo Leganza 2.2 L4 GAS
- Raise and support vehicle.
- Remove wheel nuts and front wheel.
- Remove engine undercover bolts, then undercover.
- Remove hub nut. Discard hub nut and install a new one upon installation.
- Remove ball joint to steering knuckle clip and nut.
- Separate ball joint from steering knuckle using suitable tool. Failure to use recommended tool will cause damage to ball joint or ball joint seal.
- Remove tie rod nut and separate tie rod from steering knuckle. Failure to use recommended tool will cause damage to knuckle or strut assembly.
- Push driveaxle shaft from wheel hub. Support unfa...
CLICK HERE TO GET FULL ACCESS TO 1999 Daewoo Leganza DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1999 Daewoo Leganza AUTOMOBILES
Starter, Replace
Vehicle: 1999 Daewoo Leganza 2.2 L4 GAS
- Disconnect battery ground cable.
- Remove intake manifold to block strap bracket over starter.
- Remove starter motor mounting bolts.
- Remove terminal nut, then disconnect electrical connectors and positive cable from starter solenoid.
- Remove starter from vehicle.
- Reverse procedur...
CLICK HERE TO GET FULL ACCESS TO 1999 Daewoo Leganza STARTER & ALTERNATOR REPLACEMENT PROCEDURES
CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES FOR 1999 Daewoo Leganza AUTOMOBILES
Cabin Air Filter Service -> Daewoo -> 1999-2002 Leganza & Nubira
Vehicle: 1999 Daewoo Leganza 2.2 L4 GAS
On 1999-2001 models, under normal operating conditions the cabin air filter should be replaced every 6 Months or 6,000 miles. In dusty areas change the cabin air filter more often. On 2002 models, under normal operating conditions the cabin air filter should be replaced every 6 Months or 7,500 miles. In dusty areas change the cabin air filter more often.
- Open the hood.
- Remove the two nuts securing the vacuum canis...
CLICK HERE TO GET FULL ACCESS TO 1999 Daewoo Leganza CABIN AIR FILTER LOCATIONS & REPLACEMENT PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 1999 Daewoo Leganza AUTOMOBILES
Daewoo -> Intelligent Suspension Control (ISC) Indicator Lamp ->
Vehicle: 1999 Daewoo Leganza 2.2 L4 GAS
The Intelligent Control Suspension (ICS) indicator lamp will illuminate when the ignition switch is placed in the on position as warning lamp check and should go off when the engine is started. If the lamp illuminates while driving the vehicle, the system is switched to fail safe mode. Place ignition switch in...
CLICK HERE TO GET FULL ACCESS TO 1999 Daewoo Leganza MAINTENANCE LAMP RESET PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 1999 Daewoo Leganza AUTOMOBILES
Heater Hose, Replace -> Bypass -> Inlet -> Outlet
Vehicle: 1999 Daewoo Leganza 2.2 L4 GAS
Inlet
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Reposition hose clamp at heater core.
- Remove hose from heater core.
- Reposition hose clamp at inlet coolant line.
- Remove hose from inlet coolant line.
- Remove hose from vehicle.
- Reverse procedure to install.
Outlet
- Disconnect battery ground cable.
- Drain cooling system into a suitable container by loosening drain plug of radiator.
- Reposition hose...
CLICK HERE TO GET FULL ACCESS TO 1999 Daewoo Leganza RADIATOR & HOSE REPLACEMENT PROCEDURES
SERPENTINE BELT SERVICE PROCEDURES FOR 1999 Daewoo Leganza AUTOMOBILES
Serpentine Drive Belt, Replace
Vehicle: 1999 Daewoo Leganza 2.2 L4 GAS
- Rotate or lift the belt tensioner arm, using a suitable tool to relieve tension from dr...
CLICK HERE TO GET FULL ACCESS TO 1999 Daewoo Leganza SERPENTINE BELT SERVICE PROCEDURES
COMPONENT LOCATION DIAGRAMS FOR 1999 Daewoo Leganza AUTOMOBILES
Component location diagrams for most 1999 Daewoo Leganza cars and light trucks sold in the U.S. from 1990+.
![]() Components on diagram: |
![]() Components on diagram: |
CLICK HERE TO GET FULL ACCESS TO 1999 Daewoo Leganza PARTS/COMPONENTS LOCATION DIAGRAMS!
WIRING DIAGRAMS FOR 1999 Daewoo Leganza AUTOMOBILES
OEM drawn wiring diagrams for most 1999 Daewoo Leganza cars and light trucks sold in the U.S.
![]() Components on diagram: |
![]() Components on diagram: |
CLICK HERE TO GET FULL ACCESS TO 1999 Daewoo Leganza WIRING DIAGRAMS!
TECHNICAL SERVICE BULLETINS FOR 1999 Daewoo Leganza AUTOMOBILES
OEM TSB listings for most 1999 Daewoo Leganza cars and light trucks sold in the U.S. from 1985+.
Document: SAFETY RECALL - CAMSHAFT POSITION SENSOR Vehicle: 1999 Daewoo Leganza 2.2 L4 GAS Auto Systems: |
Document: SAFETY RECALL - CAMSHAFT POSITION SENSOR AND FUSE Vehicle: 1999 Daewoo Leganza 2.2 L4 GAS Auto Systems: |
CLICK HERE TO GET FULL ACCESS TO 1999 Daewoo Leganza TECHNICAL SERVICE BULLETINS!
COMPONENT/PARTS SPECIFICATIONS FOR 1999 Daewoo Leganza AUTOMOBILES
BRAKE SPECIFICATIONS: Brake drum, rotor, caliper, and related specifications for most 1999 Daewoo Leganza cars and light trucks sold in the U.S. and Canada from 1970+.
- Brake caliper mounting bolt torque
- Brake drum runout, machining, & discard specs
- Minimum brake lining thickness.
- Brake rotor runout, parallelism, machining, discard, & finish specs
A/C SYSTEM SPECIFICATIONS: Air conditioning refrigerant capacity and type as well as lubricant capacity for most 1999 Daewoo Leganza cars and light trucks sold in the U.S. and Canada from 1980+.
- Refrigerant capacity & type, compressor oil viscosity, total system oil capacity & compressor clutch gap
COOLING SYSTEM BLEED: Cooling system bleeder valve identification, bleeder type and bleed procedures for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1986+.
PREVENTIVE MAINTENANCE: Preventive maintenance recommendations and required services for most domestic and imported cars and light trucks sold in the U.S. and Canada from 1980+. Includes severe and routine service schedules
QUICK-LUBE and ILLUSTRATIONS: Fluid recommendations, capacities, drain plug torques, tire data, and severe service recommended preventive maintenance schedules. Information covers most 1999 Daewoo Leganza cars and light trucks sold in the U.S. and Canada from 1980+. Engine and chassis service images.
- Automatic transmission/transaxles capacities, lubricant recommendations
- Differential/final drive capacities, lube recommendations, grades, & viscosities
- Final drive fill & drain plug torques
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Manual transmission/transaxle capacities, lube recommendations, grades, & viscosities
- Number of lubrication fittings & plugs
- Power steering, brake, & clutch fluid recommendations
- Engine oil capacities, API grade recommendations, SAE viscosity recommendations, drain plug torque
- Severe service maintenance & interval recommendations
- Tire sizes, wheel nut/bolt torque, pressures & rim sizes
- Transfer case capacities, lube recommendations, grades, & viscosities
TUNE-UP & DRIVEABILITY SPECIFICATIONS: Most tune-up specifications for most 1999 Daewoo Leganza cars and light trucks sold in the U.S. and Canada from 1980+
- Airflow sensor electrical specifications
- Tensioning specifications for systems with automatic tensioners
- Barometric pressure sensor specs
- Battery group number and cranking performance
- Crankshaft & camshaft position sensor resistance
- Engine compression pressures
- Coolant temperature sensor specs
- Computer advance.
- Diesel fuel temperature sensor resistance.
- Distributor advance specifications
- Ignition pickup coil resistance
- Exhaust gas recirculation temperature sensor resistance
- Engine fastener torque values
- Firing order diagrams
- Fuel system pressures
- Generator (alternator) specs
- Intake air temperature sensor specs
- Ignition coil specifications
- Fuel injector resistance
- Engine idle speeds
- Knock sensor resistance
- Manifold absolute pressure sensor specs
- Mixture control solenoid resistance
- Voltage regulator specs
- Spark plug applications & gaps
- Starter motor electrical specs.
- Tensioning specifications for systems without automatic tensioners
- Throttle body temperature sensor resistance
- Ignition timing in degrees at rpm
- Transmission oil temperature sensor resistance
- Throttle position sensor specs
- Vacuum sensor valve specs
CLICK HERE TO GET FULL ACCESS TO 1999 Daewoo Leganza SPECIFICATIONS DATA!
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |