Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1999 Land Rover Discovery car and truck
repair procedures including Land Rover engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1999 Land Rover Discovery automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1999 Land Rover Discovery
- 1999 Land Rover Discovery 4.0 V8 GAS, CC:3950, Fuel Injection
- 1999 Land Rover Discovery Series II 4.0 V8 GAS, CC:3950, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1999 Land Rover Discovery AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1999 Land Rover Discovery cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1999 Land Rover Discovery Series II 4.0 V8 GAS
- Raise rear of vehicle and support. Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
- Select NEUTRAL in the transmission and transfer case.
- If same components are to be reinstalled, reference mark driveshaft and mating components.
- Remove four nu...
CLICK HERE TO GET FULL ACCESS TO 1999 Land Rover Discovery DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1999 Land Rover Discovery AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1999 Land Rover Discovery cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace
Vehicle: 1999 Land Rover Discovery Series II 4.0 V8 GAS
- Raise rear of vehicle and support. Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
- If same components to be reinstalled, reference mark flexible coupling and mating components.
- Remove three nuts and bolts securing driveshaft to flexible coupling...
CLICK HERE TO GET FULL ACCESS TO 1999 Land Rover Discovery DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1999 Land Rover Discovery AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1999 Land Rover Discovery cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1999 Land Rover Discovery Series II 4.0 V8 GAS
- Remove center cap from front wheel, release stake from drive shaft nut, then loosen nut.
- Raise and support vehicle.
- Remove caliper, disc and disc shield.
- Disconnect ABS sensor electrical connector then remove ABS sensor and bushing from hub.
- Remove four bolts securing hub to carrier.
- Remove ...
CLICK HERE TO GET FULL ACCESS TO 1999 Land Rover Discovery DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1999 Land Rover Discovery AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1999 Land Rover Discovery cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 1999 Land Rover Discovery 4.0 V8 GAS
- Raise rear of vehicle and support. Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
- Select NEUTRAL in the transmission and transfer case.
- If same components are to be reinstalled, reference mark driveshaft and mating components.
- Remove four nu...
CLICK HERE TO GET FULL ACCESS TO 1999 Land Rover Discovery DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1999 Land Rover Discovery AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1999 Land Rover Discovery cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace
Vehicle: 1999 Land Rover Discovery 4.0 V8 GAS
- Raise rear of vehicle and support. Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
- If same components to be reinstalled, reference mark flexible coupling and mating components.
- Remove three nuts and bolts securing driveshaft to flexible coupling...
CLICK HERE TO GET FULL ACCESS TO 1999 Land Rover Discovery DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1999 Land Rover Discovery AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1999 Land Rover Discovery cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 1999 Land Rover Discovery 4.0 V8 GAS
- Remove center cap from front wheel, release stake from drive shaft nut, then loosen nut.
- Raise and support vehicle.
- Remove caliper, disc and disc shield.
- Disconnect ABS sensor electrical connector then remove ABS sensor and bushing from hub.
- Remove four bolts securing hub to carrier.
- Remove ...
CLICK HERE TO GET FULL ACCESS TO 1999 Land Rover Discovery DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
