Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1999 Mazda Miata car and truck
repair procedures including Mazda engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1999 Mazda Miata automobile. Try the Automotix DIY solution today!
BRAKE SERVICE PROCEDURES FOR 1999 Mazda Miata AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Mazda Miata cars and light trucks from 1990+.
Anti-lock Brakes -> Troubleshooting -> 1997 -> 1997-98 -> 1998-2001 -> 1999-2001 -> 2000-01 -> B-Series -> Miata -> Millenia -> MPV -> MX-6 & 626 -> Protege -> Tribute
Vehicle: 1999 Mazda Miata 1.8 L4 GAS
B-Series
1997
Refer to Fig. , for diagnostic index and Fig. , for Rear ABS (RABS) troubleshooting flow charts.
1998-2001
Refer to Fig. , for diagnostic index and Figs. through , for ABS (RABS & 4WABS) troubleshooting flow charts.
Miata
1997
Refer to Figs. through , for troubleshooting charts.
1999-2001
[[table data]]Millenia
Refer to Fig. , for diagnostic index,...
[[table data]] [[table data]] [[table data]] [[table data]]CLICK HERE TO GET FULL ACCESS TO 1999 Mazda Miata BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Mazda Miata AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Mazda Miata cars and light trucks from 1990+.
Anti-lock Brakes -> Component Testing -> 1997 -> 1998-2001 -> 1999-2001 -> ABS Control Module -> ABS Control Unit -> ABS Hydraulic Unit -> ABS Motor -> ABS Motor & Harness -> ABS Motor & Harness To ABS Control Module -> ABS Relay -> ABS Warning Light -> B-Series -> Clearance Inspection -> Control Unit -> Fail-Safe Relay -> Hydraulic System -> Hydraulic Unit -> Miata -> Millenia & Protege -> Motor Relay -> MPV -> MX-6 & 626 -> Pressure Differential Switch -> Rear Axle Speed Sensor -> Rotor Inspection -> Solenoid Valve -> Solenoid Valve & Valve Relay -> Valve Relay -> Voltage Inspection -> Wheel Speed Sensor
Vehicle: 1999 Mazda Miata 1.8 L4 GAS
B-Series
ABS Control Module
1999-2001
Refer to Figs. through , for component testing procedures.
ABS Warning Light
If warning light is inoperative at all times, proceed as follows:
- Inspect warning light bulb; replace as required.
- Inspect No. 10 15A fuse; replace as required.
Hydraulic Unit
1997
Disconnect hydraulic unit connector and measure resistance between terminals 1 and 3 at unit. Resistance should be 18-26 K ohms. If not, replace hydraulic unit.
Rear Axle Speed Sensor
1997
- Raise and support vehicle.
- Remove differential cover and measure clearance between rear axle speed sensor and s...
CLICK HERE TO GET FULL ACCESS TO 1999 Mazda Miata BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Mazda Miata AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Mazda Miata cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> Except Tribute -> Master Cylinder -> Tribute
Vehicle: 1999 Mazda Miata 1.8 L4 GAS
Master Cylinder
Except Tribute
- Disconnect brake fluid level sensor.
- Disconnect and cap brake fluid lines from master cylinder using Line Wrench tool No. 49-0259-770 A/B, or equivalent.
- Remove proportioning bypass valve attaching bolts and valve, if equipped.
- Remove bracket, if equipped, then the master cylinder assembly from the power brake booster.
- Reverse procedure to install, noting the following:
- On all models except B-Series, torque master cylinder nuts to 8-12 ft. lbs.
- On B-Series models, torque master cylinder nuts to 14-21 ft. lbs.
- On all models, bleed brake system.
Tribute
- D...
CLICK HERE TO GET FULL ACCESS TO 1999 Mazda Miata BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Mazda Miata AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Mazda Miata cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service -> B-Series -> Except B-Series -> Master Cylinder Overhaul -> Wheel Cylinder Overhaul
Vehicle: 1999 Mazda Miata 1.8 L4 GAS
Master Cylinder Overhaul
Except B-Series
- Remove brake fluid from reservoir after removal of master cylinder.
- Refer to Figs. through , for master cylinder disassembly.
- Visually inspect all components and repair or replace any faulty components.
- Reverse procedure to assemble.
B-Series
- Clean outside of master cylinder and drain fluid after removal.
- Remove snap ring by depressing rear piston, Fig. .
- Remove primary piston from master cylinder, then remove secondary piston by directing compressed air ...
CLICK HERE TO GET FULL ACCESS TO 1999 Mazda Miata BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Mazda Miata AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Mazda Miata cars and light trucks from 1990+.
Hydraulic Brake Systems -> Diagnosis & Testing -> Brake Fluid Level Sensor -> Proportioning Valve
Vehicle: 1999 Mazda Miata 1.8 L4 GAS
Proportioning Valve
- Connect pressure testing equipment as outlined in, Figs. through , then bleed air from brake system as outlined under " Brake System Bleed."
- Depress pedal until master cylinder pressure measures A, then record rear brake pressure (A').
- Depress pedal with additional force until master cylinder pressure measures A, then record rear brake pressure again (B').
- If pressures are...
CLICK HERE TO GET FULL ACCESS TO 1999 Mazda Miata BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Mazda Miata AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Mazda Miata cars and light trucks from 1990+.
Power Brake Units -> Troubleshooting -> Check Valve -> Function Check -> Load Test
Vehicle: 1999 Mazda Miata 1.8 L4 GAS
Function Check
- Stop engine and depress brake pedal a few times to relieve vacuum.
- With pedal depressed, start engine. After starting engine, pedal should move down slightly. If so, unit is functioning.
- After engine has run two minutes, turn it off. Depress pedal with normal force.
- If the first pedal stroke is long and gets shorter with subsequent strokes, the unit is operating. If a problem is found, inspect check valve, vacuum hose and installation. Repair if required and inspect again.
- Start engine and depress pedal with usual force.
- Stop engine with pedal still depressed. Hold peda...
CLICK HERE TO GET FULL ACCESS TO 1999 Mazda Miata BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 1999 Mazda Miata vehicle.
|
| Access the Complete guide! |
