Auto Parts Search

BRAKE SERVICE PROCEDURES FOR 1999 MERCEDES-BENZ SL600 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 MERCEDES-BENZ SL600 cars and light trucks from 1990+.
Disc Brakes -> Adjustments -> Parking Brake
Vehicle: 1999 MERCEDES-BENZ SL600 6.0 V12 GAS
Parking Brake
- Raise and support vehicle rear.
- On SL500, SL600 and SLK230 models, loosen adjusting bolt.
- On all models, remove one wheel bolt on both rear wheels. Light alloy wheels must be removed.
- Turn adjuster until brake shoes contact and it is no longer possible to turn rear wheel, noting the following:
- Use suitable 0.1772 in...
CLICK HERE TO GET FULL ACCESS TO 1999 MERCEDES-BENZ SL600 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 MERCEDES-BENZ SL600 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 MERCEDES-BENZ SL600 cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> Master Cylinder
Vehicle: 1999 MERCEDES-BENZ SL600 6.0 V12 GAS
Master Cylinder
- Remove brake fluid from reservoir.
- Disconnect bolt and remove reservoir from tandem master brake cylinder.
- Disconnect brake lines.
- On S430 and 2000 CL500, CL600, S500 and S600 models,...
CLICK HERE TO GET FULL ACCESS TO 1999 MERCEDES-BENZ SL600 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 MERCEDES-BENZ SL600 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 MERCEDES-BENZ SL600 cars and light trucks from 1990+.
Disc Brakes -> Brake System Bleed
Vehicle: 1999 MERCEDES-BENZ SL600 6.0 V12 GAS
Refer to procedure as ou...
CLICK HERE TO GET FULL ACCESS TO 1999 MERCEDES-BENZ SL600 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 MERCEDES-BENZ SL600 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 MERCEDES-BENZ SL600 cars and light trucks from 1990+.
Power Brake Units -> Power Brake Unit Service -> Brake Booster, Replace -> C43, C230, C280, E300, E320, E430, S320, S420, SL500, SL600 & SLK230 & 1998-99 CL500, CL600, S500 & S600 -> CLK320 & CLK430 -> S430 & 2000 CL500, CL600, S500 & S600
Vehicle: 1999 MERCEDES-BENZ SL600 6.0 V12 GAS
Brake Booster, Replace
C43, C230, C280, E300, E320, E430, S320, S420, SL500, SL600 & SLK230 & 1998-99 CL500, CL600, S500 & S600
- Remove master cylinder as outlined in "Hydraulic Brake Systems" section.
- Inspect master cylinder rear piston for leaks. If no leaks are visible, proceed as follows:
- Remove and measure brake fluid in booster.
- If there is more than 3.38 ounces of brake fluid, booster must be replaced.
- Disconnect vacuum line at booster.
- Remove cover below instrument panel.
- Disconnect brake pedal return spring.
- Disconnect pedal locking device and remove pin.
- Remove carrier mou...
CLICK HERE TO GET FULL ACCESS TO 1999 MERCEDES-BENZ SL600 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 MERCEDES-BENZ SL600 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 MERCEDES-BENZ SL600 cars and light trucks from 1990+.
Power Brake Units -> Diagnosis & Testing -> Brake Booster -> Non-Return Valve
Vehicle: 1999 MERCEDES-BENZ SL600 6.0 V12 GAS
Non-Return Valve
- Disconnect brake booster vacuum line.
- Connect pressure tester tool No. 201 589 13 21 00, or equivalent, between brake booster and vacuum line.
- Start engine and create 10.9-11.6 psi vacuum by opening and suddenly releasing throttle.
- Turn engine off.
- If vacuum drops more than 2.9 psi in 30 seconds, replace vacuum line.
- Torque vacuum line to 22 ft. lbs.
Brake Booster
- Disconnect brake booster vacuum line.
- Connect pressure tester tool No. 201 589 13 21 00, or equivalent, between brake booster and vacuum line.
- Connect suitable pressure tester at brake caliper.
- Connect Bosch ...
CLICK HERE TO GET FULL ACCESS TO 1999 MERCEDES-BENZ SL600 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 MERCEDES-BENZ SL600 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 MERCEDES-BENZ SL600 cars and light trucks from 1990+.
Disc Brakes -> Caliper Service -> Assemble -> Disassemble -> Fixed -> Floating -> Front -> Inspection -> Rear
Vehicle: 1999 MERCEDES-BENZ SL600 6.0 V12 GAS
Front
Fixed
Disassemble
- Press off dust cap
- Insert 1.1025 inches thick metal segment (brake disc section) into fixed caliper and carefully force pistons out against stop with compressed air.
- Remove piston using piston-turning pliers tool No. 000 589 50 37 00, or equivalent.
- Remove piston seal from groove in cylinder bore.
Inspection
- If piston is stuck or there are scores or rusted bores, replace complete caliper.
- Remove deposits on piston with soft brass wire brush or rough cloth only. If there is noticeable damage to chrome plating, replace piston.
- Inspect pistons and bores in fixed calip...
CLICK HERE TO GET FULL ACCESS TO 1999 MERCEDES-BENZ SL600 BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |