Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1999 Suzuki Swift car and truck
repair procedures including Suzuki engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1999 Suzuki Swift automobile. Try the Automotix DIY solution today!
BRAKE SERVICE PROCEDURES FOR 1999 Suzuki Swift AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Suzuki Swift cars and light trucks from 1990+.
Hydraulic Brake Systems -> Diagnosis & Testing -> Brake Fluid Leakage Inspection -> Road Test -> Substandard Or Contaminated Brake Fluid
Vehicle: 1999 Suzuki Swift 1.3 L4 GAS
Road Test
Brakes should be tested on dry, clean, smooth and reasonable level roadway which is not crowned. Road test brakes by making brake applications with both light and heavy pedal forces at various speeds to determine if car stops evenly and effectively.
Also road test vehicle to see if it pulls to one side without brake application. If it does, check tire pressure, front end alignment and front suspension attachments for looseness.
Brake Fluid Leakage Inspection
Check master cylinder fluid levels. While a slight drop in reservoir level does result from normal lining wear, ...
CLICK HERE TO GET FULL ACCESS TO 1999 Suzuki Swift BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Suzuki Swift AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Suzuki Swift cars and light trucks from 1990+.
Hydraulic Brake Systems -> Adjustments -> Brake Pedal Height -> Brake Pedal Travel Inspection
Vehicle: 1999 Suzuki Swift 1.3 L4 GAS
Brake Pedal Height
The brake pedal should be at the same height as clutch pedal. Ensure distance between brake booster mounting surface (with gasket) and pushrod clevis pin hole is as follows:
- On Esteem and Swift models, 4.51-4.54 inches (114.5-115.5 mm).
- On Grand Vitara and Vitara models, 7.60-7.99 inches (193-203 mm) for 1999 and 8.19-8.58 inches (208-218) for 2000-02.
- On Sidekick and X-90 models, 6.60-6.64 inches (167.6-168.6 mm)
Brake Pedal Travel Inspection
- Start engine, then depress brake pedal a few times.
- Apply ap...
CLICK HERE TO GET FULL ACCESS TO 1999 Suzuki Swift BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Suzuki Swift AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Suzuki Swift cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> Master Cylinder
Vehicle: 1999 Suzuki Swift 1.3 L4 GAS
Master Cylinder
- Clean any dirt from around reservoir cap. Remove cap, then drain brake fluid into appropriate container.
- Remove reservoir connector screw, Fig. , then the reservoir.
- Disconnect brake lines from master cylinder. Do not allow brake fluid to get on painted surfaces.
- Remove master cylinder attaching bolts, then the master cylinder.
- Adjust clearance of booster piston rod to master cylinder piston as follows:
- Push piston rod several times to ensure reaction disc is in place.
- Measure with gasket in place on master cylinder and booster at atmospheric pressure.
- Set measurin...
CLICK HERE TO GET FULL ACCESS TO 1999 Suzuki Swift BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Suzuki Swift AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Suzuki Swift cars and light trucks from 1990+.
Power Brake Units -> Power Brake Unit Service -> Brake Booster Overhaul -> Esteem, Grand Vitara, Sidekick, Vitara & X-90 -> Power Brake Unit, Replace -> Swift
Vehicle: 1999 Suzuki Swift 1.3 L4 GAS
Power Brake Unit, Replace
- Remove master cylinder from booster as outlined under " Master Cylinder, Replace," in "Hydraulic Brakes."
- Disconnect pushrod clevis from brake pedal arm.
- Disconnect vacuum hose from booster.
- Remove booster attaching nuts, then the booster assembly.
- Reverse procedure to install, then ensure brake pedal height and pedal travel is correct as outlined under "Brake Pedal Height, Adjust," and "Brake Pedal Travel Check" in "Hydraulic Brakes."
Brake Booster Overhaul
Swift
Refer to Fig., when performing this procedure.
- Remove piston rod from booster, then the pushrod clev...
CLICK HERE TO GET FULL ACCESS TO 1999 Suzuki Swift BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Suzuki Swift AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Suzuki Swift cars and light trucks from 1990+.
Disc Brakes -> Rotor Replacement
Vehicle: 1999 Suzuki Swift 1.3 L4 GAS
- Raise and support vehicle, then remove wheels.
- Remove caliper as outlined under "Caliper Service." During removal, be careful not to damage brake f...
CLICK HERE TO GET FULL ACCESS TO 1999 Suzuki Swift BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Suzuki Swift AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Suzuki Swift cars and light trucks from 1990+.
Disc Brakes -> Caliper Service -> Assemble -> Disassemble -> Installation -> Removal
Vehicle: 1999 Suzuki Swift 1.3 L4 GAS
Removal
- Remove approximately 2/3 of brake fluid from master cylinder.
- Raise and support vehicle.
- Mark relationship between front wheel and axle, then remove wheel and tire assembly.
- Remove inlet fitting attaching bolt, copper washer and inlet fitting from caliper housing. Plug opening in inlet fitting to prevent fluid loss and contamination. Do not crimp brake hose, as this may damage internal structure of hose. If only shoe and lining assemblies are to be replaced, do not disconnect brake line fitting from caliper.
- Remove caliper slide pins and caliper.
- Remove shoe and lining assembl...
CLICK HERE TO GET FULL ACCESS TO 1999 Suzuki Swift BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
