Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1999 Toyota Celica car and truck
repair procedures including Toyota engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1999 Toyota Celica automobile. Try the Automotix DIY solution today!
BRAKE SERVICE PROCEDURES FOR 1999 Toyota Celica AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Toyota Celica cars and light trucks from 1990+.
Power Brake Units -> Adjustments -> Brake Pedal Height & Freeplay
Vehicle: 1999 Toyota Celica 2.2 L4 GAS
Brake Pedal Height & Freeplay
Refer to Fig. for pedal height and freeplay references.
- Loosen stop light switch, then the clevis locknut.
- Adjust pedal height by turning pushrod.
- Tighten locknut an...
CLICK HERE TO GET FULL ACCESS TO 1999 Toyota Celica BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Toyota Celica AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Toyota Celica cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Disc Brake Specifications
Vehicle: 1999 Toyota Celica 2.2 L4 GAS
Refer to the disc brake specifications under "Rear ... "
CLICK HERE TO GET FULL ACCESS TO 1999 Toyota Celica BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Toyota Celica AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Toyota Celica cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Brake Pad Service -> 2WD -> 4Runner -> 4WD -> Avalon, Camry, Camry Solara, Corolla, Celica, Highlander, MR2 & Sienna -> Disc, Replace -> Echo & RAV4 -> Land Cruiser -> Sequoia & Tundra -> Supra -> T100 -> Tacoma -> Tercel
Vehicle: 1999 Toyota Celica 2.2 L4 GAS
Avalon, Camry, Camry Solara, Corolla, Celica, Highlander, MR2 & Sienna
- Remove front wheel and reinstall lug nuts to locate disc temporarily.
- Remove caliper from torque plate and suspend so brake hose is not under tension. Do not disconnect brake hose.
- Refer to Figs. through and remove the following components:
- Brake pads.
- Anti-squeal shims.
- Pad wear indicator plates.
- Support plates.
- Anti-squeal springs.
- Install new pad support plates.
- Install new pad wear indicator plates on each pad with arrow pointing in direction of disc rotation.
- Install new anti-squeal shims on each pad.
- Install ea...
CLICK HERE TO GET FULL ACCESS TO 1999 Toyota Celica BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Toyota Celica AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Toyota Celica cars and light trucks from 1990+.
Anti-lock Brakes -> System Service -> ABS Computer -> Brake Actuator -> Brake Lines -> Brake System Bleed -> Component Replacement -> Master Cylinder
Vehicle: 1999 Toyota Celica 2.2 L4 GAS
Brake System Bleed
Master Cylinder
- Fill reservoir.
- Disconnect master cylinder tubes.
- Slowly depress brake pedal and hold.
- Block outlet holes with fingers and release pedal.
- Repeat 3-4 times.
Brake Lines
Bleed wheel with longest brake line first, then work your way back to the master cylinder according to brake line length.
- Connect brake cylinder tube.
- Depress pedal several times and hold.
- Loosen bleeder plug.
- When fluid stops coming out, tighten bleeder plug and release pedal.
- Repeat several times.
- Repeat entire procedure for each wheel.
- Fill reservoir.
Component Replacement
Brake Actuator
- Remove ...
CLICK HERE TO GET FULL ACCESS TO 1999 Toyota Celica BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Toyota Celica AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Toyota Celica cars and light trucks from 1990+.
Anti-lock Brakes -> Diagnosis & Testing -> 1997-2000 4RUNNER -> 1997-2000 RAV4 -> 1997-2001 CAMRY W/BOSCH ABS -> 1997-2001 CAMRY W/NIPPONDENSO ABS -> 1997-2001 CAMRY W/TRAC -> 1998-2000 SIENNA LESS VSC -> 2001-02 4RUNNER -> 2001-02 RAV4 -> 2001-02 SIENNA LESS VSC -> 2002 CAMRY W/ABS, BA, TRAC & VSC -> 2002 CAMRY W/BOSCH ABS -> 2002 CAMRY W/DENSO ABS -> 4Runner -> ABS Warning Lamp -> Accessing Diagnostic Trouble Codes -> Anti-Lock Brake System (ABS) -> Avalon -> AVALON LESS TRAC -> AVALON W/TRAC -> Avalon, Camry, Celica, Corolla, Echo, MR2, RAV4, Paseo, Sienna, Supra & Tercel -> Brake Actuator -> Camry -> Camry Solara -> CAMRY SOLARA LESS TRAC -> CAMRY SOLARA W/TRAC -> CELICA -> Clearing Diagnostic Trouble Codes -> Component Testing -> Corolla -> Diagnostic Tests -> Diagnostic Trouble Code Interpretation -> Echo -> HIGHLANDER W/ABS, BA, TRAC & VSC -> HIGHLANDER W/BA & ABS -> Land Cruiser -> LAND CRUISER LESS VSC -> LAND CRUISER w/VSC -> Land Cruiser, Previa, Tacoma, T100 & 4Runner -> Less Toyota Hand Held Tester -> Less Toyota Hand-Held Tester -> MR2 -> PASEO -> Previa -> RAV4 -> Sequoia -> Sequoia & Tundra -> Sienna -> SIENNA W/VSC -> Speed Sensor -> Stop Lamp Switch -> Supra -> SUPRA LESS TRAC -> SUPRA W/TRAC -> System Testing -> T100 -> Tacoma -> Tc Terminal -> Tercel -> Traction Control (TRAC) Warning Lamp -> Ts Terminal -> Tundra -> Vehicle Skid Control (VSC) Warning Lamp -> Wiring Diagrams -> With Toyota Hand Held Tester -> With Toyota Hand-Held Tester
Vehicle: 1999 Toyota Celica 2.2 L4 GAS
Accessing Diagnostic Trouble Codes
Less Toyota Hand-Held Tester
- On Land Cruiser models, ensure center differential is free.
- On all models, turn ignition switch to On position.
- Disconnect short pin from Data Link Connector 1 (DLC1).
- Connect terminals Tc and E1 or CG of DLC1 or DLC3 using tool No. 09843-18020, or equivalent, Figs. through .
- Read and record number of times ANTI-LOCK warning lamp flashes.
- If system is operating properly, (no faults) warning lamp will blink once every .25 seconds.
- Connect actuator check connector and ensure proper operation.
With Toyota Hand-Held Tester
- O...
CLICK HERE TO GET FULL ACCESS TO 1999 Toyota Celica BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 1999 Toyota Celica AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 1999 Toyota Celica cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service -> Assemble -> Disassemble -> Except Sienna -> Inspection -> Master Cylinder -> Overhaul -> Sienna -> Wheel Cylinders
Vehicle: 1999 Toyota Celica 2.2 L4 GAS
Master Cylinder
Except Sienna
Disassemble
For the following procedures, refer to Fig. for assistance.
- Remove master cylinder boot.
- Remove setscrew and reservoir tank, then the cap and strainer from reservoir.
- Remove two grommets and place cylinder in vise.
- Push piston in and remove stopper bolt, Fig. .
- Push pistons in and remove snap ring, then No. 1 piston carefully by hand.
- Place cylinder on edges of two wooden blocks and tap on cylinder until No. 2 piston comes out.
Inspection
Clean parts with compressed air. Inspect cylinder bore for rust and scoring. Also, inspect for wear or damag...
CLICK HERE TO GET FULL ACCESS TO 1999 Toyota Celica BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
