Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 1999 Toyota Solara car and truck
repair procedures including Toyota engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 1999 Toyota Solara automobile. Try the Automotix DIY solution today!
We have info for following modifications of 1999 Toyota Solara
- 1999 Toyota Solara 3.0 V6 GAS, CC:2995, Fuel Injection
- 1999 Toyota Solara 2.2 L4 GAS, CC:2164, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1999 Toyota Solara AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1999 Toyota Solara cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 1999 Toyota Solara 2.2 L4 GAS
Front
- Raise and support vehicle, then remove front wheels.
- Remove front fender apron seal
- Remove drain plug and drain transaxle oil into suitable container.
- Remove brake caliper and support with wire, then the rotor, Fig. .
- Place a dial indicator near center of axle hub and check backlash in bearing shaft direction, Fig. . If backlash is greater than .002 inch, replace bearing.
- Place a dial indicator at surface of axle hub outside hub bolt and check hub runout, Fig. . If runout is greater than .002 inch, replace axle hub.
- Install rotor and brake caliper, then remove driveshaft ...
CLICK HERE TO GET FULL ACCESS TO 1999 Toyota Solara DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 1999 Toyota Solara AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 1999 Toyota Solara cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 1999 Toyota Solara 3.0 V6 GAS
Front
- Raise and support vehicle, then remove front wheels.
- Remove front fender apron seal
- Remove drain plug and drain transaxle oil into suitable container.
- Remove brake caliper and support with wire, then the rotor, Fig. .
- Place a dial indicator near center of axle hub and check backlash in bearing shaft direction, Fig. . If backlash is greater than .002 inch, replace bearing.
- Place a dial indicator at surface of axle hub outside hub bolt and check hub runout, Fig. . If runout is greater than .002 inch, replace axle hub.
- Install rotor and brake caliper, then remove driveshaft ...
CLICK HERE TO GET FULL ACCESS TO 1999 Toyota Solara DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |



