Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2000 Chevrolet C2500 Pickup car and truck
repair procedures including Chevrolet engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2000 Chevrolet C2500 Pickup automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2000 Chevrolet C2500 Pickup
- 2000 Chevrolet C2500 Pickup 5.7 V8 GAS, CID:350, Fuel Injection, Aspiration:350, Engine VIN:, Desg:R
- 2000 Chevrolet C2500 Pickup 6.5 V8 DIESEL, CID:395, Fuel Injection, Aspiration:395, Engine VIN:, Desg:F
- 2000 Chevrolet C2500 Pickup 7.4 V8 GAS, CID:454, Fuel Injection, Aspiration:454, Engine VIN:, Desg:J
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Chevrolet C2500 Pickup AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 Chevrolet C2500 Pickup cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 2000 Chevrolet C2500 Pickup 7.4 V8 GAS
Never clamp propeller shaft tubing in a vise. Clamping could dent or deform the tube causing an imbalance or unsafe condition. Always clamp on one of the yokes and support the shaft horizontally. Avoid damaging the slip yoke sealing surface. Nicks may damage the bushing or cut the lip seal.
Disassemble
- Support propeller shaft in a line horizontal with table of a press.
- Mark propeller shaft in order to show which end connects to transmission and which end goes to rear axle.
- On models equipped with external snap ring retainers, proceed as follows:
- Disassemble snap rings by ...
CLICK HERE TO GET FULL ACCESS TO 2000 Chevrolet C2500 Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Chevrolet C2500 Pickup AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 Chevrolet C2500 Pickup cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Front, All Except NP8 Axle -> Front, NP8 Axle -> One Piece Driveshaft -> Rear -> Three Piece Driveshaft -> Two Piece Driveshaft
Vehicle: 2000 Chevrolet C2500 Pickup 6.5 V8 DIESEL
Front
Front, All Except NP8 Axle
- Raise and support vehicle.
- Remove front differential carrier shield, if used.
- Reference mark relationship of propeller shaft to front axle and transfer case flange.
- Remove bolts and retainers from front axle.
- Remove bolts and retainers from transfer case.
- Remove propeller shaft. When removing propeller shaft, do not attempt to remove shaft by pounding on yoke ears or using a tool between yoke and universal joint. If propeller shaft is removed by using such means, injection joints may fracture and lead to premature failure of joint.
- Compress propeller...
CLICK HERE TO GET FULL ACCESS TO 2000 Chevrolet C2500 Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Chevrolet C2500 Pickup AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 Chevrolet C2500 Pickup cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 2000 Chevrolet C2500 Pickup 6.5 V8 DIESEL
Never clamp propeller shaft tubing in a vise. Clamping could dent or deform the tube causing an imbalance or unsafe condition. Always clamp on one of the yokes and support the shaft horizontally. Avoid damaging the slip yoke sealing surface. Nicks may damage the bushing or cut the lip seal.
Disassemble
- Support propeller shaft in a line horizontal with table of a press.
- Mark propeller shaft in order to show which end connects to transmission and which end goes to rear axle.
- On models equipped with external snap ring retainers, proceed as follows:
- Disassemble snap rings by ...
CLICK HERE TO GET FULL ACCESS TO 2000 Chevrolet C2500 Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Chevrolet C2500 Pickup AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 Chevrolet C2500 Pickup cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Front, All Except NP8 Axle -> Front, NP8 Axle -> One Piece Driveshaft -> Rear -> Three Piece Driveshaft -> Two Piece Driveshaft
Vehicle: 2000 Chevrolet C2500 Pickup 5.7 V8 GAS
Front
Front, All Except NP8 Axle
- Raise and support vehicle.
- Remove front differential carrier shield, if used.
- Reference mark relationship of propeller shaft to front axle and transfer case flange.
- Remove bolts and retainers from front axle.
- Remove bolts and retainers from transfer case.
- Remove propeller shaft. When removing propeller shaft, do not attempt to remove shaft by pounding on yoke ears or using a tool between yoke and universal joint. If propeller shaft is removed by using such means, injection joints may fracture and lead to premature failure of joint.
- Compress propeller...
CLICK HERE TO GET FULL ACCESS TO 2000 Chevrolet C2500 Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Chevrolet C2500 Pickup AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 Chevrolet C2500 Pickup cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 2000 Chevrolet C2500 Pickup 5.7 V8 GAS
Never clamp propeller shaft tubing in a vise. Clamping could dent or deform the tube causing an imbalance or unsafe condition. Always clamp on one of the yokes and support the shaft horizontally. Avoid damaging the slip yoke sealing surface. Nicks may damage the bushing or cut the lip seal.
Disassemble
- Support propeller shaft in a line horizontal with table of a press.
- Mark propeller shaft in order to show which end connects to transmission and which end goes to rear axle.
- On models equipped with external snap ring retainers, proceed as follows:
- Disassemble snap rings by ...
CLICK HERE TO GET FULL ACCESS TO 2000 Chevrolet C2500 Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Chevrolet C2500 Pickup AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 Chevrolet C2500 Pickup cars and light trucks from 1990+.
DRIVESHAFT, Replace -> Front -> Front, All Except NP8 Axle -> Front, NP8 Axle -> One Piece Driveshaft -> Rear -> Three Piece Driveshaft -> Two Piece Driveshaft
Vehicle: 2000 Chevrolet C2500 Pickup 7.4 V8 GAS
Front
Front, All Except NP8 Axle
- Raise and support vehicle.
- Remove front differential carrier shield, if used.
- Reference mark relationship of propeller shaft to front axle and transfer case flange.
- Remove bolts and retainers from front axle.
- Remove bolts and retainers from transfer case.
- Remove propeller shaft. When removing propeller shaft, do not attempt to remove shaft by pounding on yoke ears or using a tool between yoke and universal joint. If propeller shaft is removed by using such means, injection joints may fracture and lead to premature failure of joint.
- Compress propeller...
CLICK HERE TO GET FULL ACCESS TO 2000 Chevrolet C2500 Pickup DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2000 Chevrolet C2500 Pickup vehicle.
|
| Access the Complete guide! |
