Auto Parts Search
We have info for following modifications of 2000 Chevrolet Impala
- 2000 Chevrolet Impala 3.8 V6 GAS, CID:231, Fuel Injection, Aspiration:231, Engine VIN:, Desg:K
- 2000 Chevrolet Impala 3.4 V6 GAS, CID:207, Fuel Injection, Aspiration:207, Engine VIN:, Desg:E
- 2000 Chevrolet Impala LS 3.8 V6 GAS, CID:231, Fuel Injection, Aspiration:231, Engine VIN:, Desg:K
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Chevrolet Impala AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 Chevrolet Impala cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2000 Chevrolet Impala 3.8 V6 GAS
- Raise and suitably support vehicle.
- Remove wheel and tire.
- Remove stabilizer shaft link.
- Remove front wheel drive shaft nut. Insert a drift or a flat-bladed tool into caliper and rotor to prevent rotor from turning.
- Disconnect outer tie rod assembly from steering knuckle.
- Separate ball joint from steering knuckle. Do not attempt to move vehicle with drive axle(s) removed from wheel bearing. Wheel(s) could fall off, dropping vehicle to ground and causing personal injury or damage to vehicle.
- Separate front wheel drive axle from front wheel drive shaft bearing using a suitable pu...
CLICK HERE TO GET FULL ACCESS TO 2000 Chevrolet Impala DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Chevrolet Impala AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 Chevrolet Impala cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2000 Chevrolet Impala LS 3.8 V6 GAS
- Raise and suitably support vehicle.
- Remove wheel and tire.
- Remove stabilizer shaft link.
- Remove front wheel drive shaft nut. Insert a drift or a flat-bladed tool into caliper and rotor to prevent rotor from turning.
- Disconnect outer tie rod assembly from steering knuckle.
- Separate ball joint from steering knuckle. Do not attempt to move vehicle with drive axle(s) removed from wheel bearing. Wheel(s) could fall off, dropping vehicle to ground and causing personal injury or damage to vehicle.
- Separate front wheel drive axle from front wheel drive shaft bearing using a suitable pu...
CLICK HERE TO GET FULL ACCESS TO 2000 Chevrolet Impala DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Chevrolet Impala AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 Chevrolet Impala cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2000 Chevrolet Impala 3.4 V6 GAS
- Raise and suitably support vehicle.
- Remove wheel and tire.
- Remove stabilizer shaft link.
- Remove front wheel drive shaft nut. Insert a drift or a flat-bladed tool into caliper and rotor to prevent rotor from turning.
- Disconnect outer tie rod assembly from steering knuckle.
- Separate ball joint from steering knuckle. Do not attempt to move vehicle with drive axle(s) removed from wheel bearing. Wheel(s) could fall off, dropping vehicle to ground and causing personal injury or damage to vehicle.
- Separate front wheel drive axle from front wheel drive shaft bearing using a suitable pu...
CLICK HERE TO GET FULL ACCESS TO 2000 Chevrolet Impala DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2000 Chevrolet Impala vehicle. |
Access the Complete guide! |