Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2000 Chrysler Voyager car and truck
repair procedures including Chrysler engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2000 Chrysler Voyager automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2000 Chrysler Voyager
- 2000 Chrysler Voyager 3.0 V6 GAS, CC:2972, CID:181, Fuel Injection, Aspiration:181, Engine VIN:, Desg:3
- 2000 Chrysler Voyager 3.3 V6 GAS, CID:201, Fuel Injection, Aspiration:201, Engine VIN:, Desg:R
- 2000 Chrysler Voyager 2.4 L4 GAS, CC:2429, CID:148, Fuel Injection, Aspiration:148, Engine VIN:, Desg:B
- 2000 Chrysler Voyager 3.3 V6 FLEX, CID:201, Fuel Injection, Aspiration:201, Engine VIN:, Desg:G
- 2000 Chrysler Voyager SE 3.3 V6 FLEX, CID:201, Fuel Injection, Aspiration:201, Engine VIN:, Desg:G
BRAKE SERVICE PROCEDURES FOR 2000 Chrysler Voyager AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Chrysler Voyager cars and light trucks from 1990+.
Disc Brakes -> Caravan, Town & Country & Voyager -> Brake Pad Service -> Front -> Installation -> Rear -> Removal
Vehicle: 2000 Chrysler Voyager SE 3.3 V6 FLEX
Front
Removal
- Raise and support vehicle.
- Remove front wheel and tire assemblies.
- Remove two caliper-to-knuckle attaching bolts, then remove caliper by sliding away from adapter and lifting off rotor, Fig. . Support caliper firmly to prevent weight of caliper from damaging flexible hose.
- Remove outboard pad by prying pad retaining clip over raised area of caliper, then sliding pad down and off of caliper.
- Pull inboard pad away from caliper piston, until springs release from piston.
Installation
- Check piston seal for leaks and for ruptures in piston dust boot. Replace all seals, boots o...
CLICK HERE TO GET FULL ACCESS TO 2000 Chrysler Voyager BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Chrysler Voyager AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Chrysler Voyager cars and light trucks from 1990+.
Anti-lock Brakes -> Caravan, Town & Country & Voyager -> Description -> ABS Fuses & Relays -> ABS Warning Lamp -> Controller Anti-Lock Brake (CAB) -> Hydraulic Control Unit (HCU) -> Wheel Speed Sensors
Vehicle: 2000 Chrysler Voyager 3.3 V6 FLEX
The ITT Teves Mark IV and Mark 20 Anti-Lock Brake Systems are designed to prevent wheel lock-up on any road surface when brakes are applied. They are composed of a complex network of electrical and hydraulic components but should usually function much the same as standard, non-ABS braking systems. The hydraulic circuits to each wheel are diagonally split for safety in the event of pressure loss, and conventional vacuum assist is provided on all models.
The anti-lock brake system operates when brakes are applied while traveling at a speed greater than three to five mph. It is normal f...
CLICK HERE TO GET FULL ACCESS TO 2000 Chrysler Voyager BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Chrysler Voyager AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Chrysler Voyager cars and light trucks from 1990+.
Anti-lock Brakes -> Caravan, Town & Country & Voyager -> Precautions -> General Service Precautions
Vehicle: 2000 Chrysler Voyager 3.3 V6 FLEX
General Service Precautions
Certain components of the anti-lock brake system are not intended to be serviced individually. Attempting to remove or disconnect components of this type may result in personal injury and/or improper system operation. Only the components with removal and installation procedures should be serviced.
Observe the following general precautions when servicing the anti-lock b...
CLICK HERE TO GET FULL ACCESS TO 2000 Chrysler Voyager BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Chrysler Voyager AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Chrysler Voyager cars and light trucks from 1990+.
Disc Brakes -> Caravan, Town & Country & Voyager -> Troubleshooting -> Caliper Brake Fluid Leak -> Rear Brakes Locking On Application
Vehicle: 2000 Chrysler Voyager SE 3.3 V6 FLEX
Caliper Brake Fluid Leak
- Damaged or worn caliper piston seal.
- Scores in cylinder bore.
- Corrosion build-up in cylinder bore or on piston surface.
- Metal clip in seal groove.
Rear Brakes Locking On Application
On brake s...
CLICK HERE TO GET FULL ACCESS TO 2000 Chrysler Voyager BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Chrysler Voyager AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Chrysler Voyager cars and light trucks from 1990+.
Hydraulic Brake Systems -> Adjustments -> 1997-2000 -> 2001 -> Height Sensing Proportioning Valve -> Park Brake Cable Tensioner -> Stop Lamp Switch
Vehicle: 2000 Chrysler Voyager 3.3 V6 FLEX
Height Sensing Proportioning Valve
1997-2000
- Raise and support vehicle, allowing rear suspension to hang free.
- Remove rear wheel and tire assemblies.
- Using an appropriate jack, support rear axle.
- Disconnect track bar from rear axle, then the shock absorbers.
- Loosen, but do not remove, both leaf spring to front spring hanger pivot bolts.
- Loosen adjustment nut on actuator, Fig. .
- Ensure hooked end of actuator is properly seated in clip on valve lever and clip is properly positioned on lever of valve.
- Pull housing of valve actuator toward spring hanger until lever on valve bottoms on body of va...
CLICK HERE TO GET FULL ACCESS TO 2000 Chrysler Voyager BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Chrysler Voyager AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Chrysler Voyager cars and light trucks from 1990+.
Anti-lock Brakes -> Caravan, Town & Country & Voyager -> Troubleshooting
Vehicle: 2000 Chrysler Voyager 3.3 V6 FLEX
Brake system troubleshooting procedures are limited to the basic brake syste...
CLICK HERE TO GET FULL ACCESS TO 2000 Chrysler Voyager BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2000 Chrysler Voyager vehicle.
|
| Access the Complete guide! |
