Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2000 Ford Contour car and truck
repair procedures including Ford engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2000 Ford Contour automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2000 Ford Contour
- 2000 Ford Contour SVT 2.5 V6 GAS, CC:2450, CID:155, Fuel Injection, Aspiration:155, Engine VIN:, Desg:G
- 2000 Ford Contour 2.0 L4 GAS, CC:1989, CID:121, Fuel Injection, Aspiration:121, Engine VIN:, Desg:3
- 2000 Ford Contour 2.5 V6 GAS, CC:2450, CID:155, Fuel Injection, Aspiration:155, Engine VIN:, Desg:L
- 2000 Ford Contour 2.0 L4 BI-FUEL, CC:1989, CID:121, Fuel Injection, Aspiration:121, Engine VIN:, Desg:Z
BRAKE SERVICE PROCEDURES FOR 2000 Ford Contour AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Ford Contour cars and light trucks from 1990+.
Drum Brakes -> Contour, Cougar, Mystique, Sable & Taurus -> Inspection
Vehicle: 2000 Ford Contour 2.0 L4 BI-FUEL
- Inspect components for damage and unusual wear. Replace as required.
- Inspect wheel cylinders. Boots which are torn, cut, or heat damaged indicate need for wheel cylinder replacement. Fluid spilling from boot center hole, or wetness around wheel cylinder ends indicates cup leakage and need for wheel cylinder replacement. A small amount of fluid is always present and is considered normal, acting as lubricant for cylinder pistons.
- Inspect backing plate for evidence o...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Contour BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Ford Contour AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Ford Contour cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service -> Assemble -> Disassemble -> Inspection -> Master Cylinder Overhaul -> Overhaul -> Wheel Cylinders
Vehicle: 2000 Ford Contour SVT 2.5 V6 GAS
Master Cylinder Overhaul
Disassemble
- Clean outside of master cylinder thoroughly. Drain brake fluid from master cylinder.
- Remove stop bolt and pressure control valves, if equipped.
- Pry up on reservoir and remove it from master cylinder body.
- Remove fluid control valve, if equipped.
- Depress primary piston and remove snap ring from retaining groove at open end of bore.
- Remove primary and secondary piston assemblies from master cylinder. If secondary piston does not come out, apply air pressure to secondary outlet port to remove.
Inspection
When disassembled, wash all parts in clean brake...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Contour BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Ford Contour AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Ford Contour cars and light trucks from 1990+.
Disc Brakes -> Rear Disc & Parking Brakes -> Rotor Replacement -> Continental, Cougar, Mustang, Sable & Taurus -> Contour & Mystique -> Crown Victoria, Grand Marquis, Marauder & Town Car -> Escort, Tracer & ZX2 -> Installation -> LS & Thunderbird -> Removal
Vehicle: 2000 Ford Contour SVT 2.5 V6 GAS
Continental, Cougar, Mustang, Sable & Taurus
Removal
- Remove rear disc brake caliper assembly as outlined under "Caliper Service." Do not disconnect flexible hose unless caliper requires service. Support caliper with wire or tie strap so flexible hose is not stretched or twisted.
- Remove rear disc support bracket to wheel knuckle bolts, then the rear disc support bracket and brake shoes and linings.
- Remove two nuts, then the rotor from rear hub.
Installation
- If installing new rotor, remove protective coating from rotor with suitable carburetor cleaner.
- Lubricate rear hub pilot diameter w...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Contour BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Ford Contour AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Ford Contour cars and light trucks from 1990+.
Anti-lock Brakes -> Contour, Cougar & Mystique -> System Service -> 2.0L Engine -> 2.5L Engine -> Brake System Bleed -> Component Replacement -> Front ABS Sensor -> Hydraulic Control Unit (HCU) -> Rear ABS Sensor
Vehicle: 2000 Ford Contour 2.0 L4 GAS
Brake System Bleed
Refer to "Hydraulic Brake Systems" for bleeding procedure.
Component Replacement
Hydraulic Control Unit (HCU)
2.0L Engine
- Remove brake booster, then air cleaner support bracket.
- Remove instrument panel lower panel.
- Disconnect brake booster support brackets, then remove brackets.
- Place air conditioning tube support bracket aside.
- Disconnect clutch tube (if equipped) and remove bolt, then booster side support bracket.
- Remove master cylinder fluid feed tubes and hydraulic unit tubes.
- Disconnect hydraulic control unit connector.
- Remove control unit nuts and control unit.
- Reverse ...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Contour BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Ford Contour AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Ford Contour cars and light trucks from 1990+.
Disc Brakes -> Rear Disc & Parking Brakes -> Brake Pad Service -> Continental, Cougar, Mustang, Sable & Taurus -> Contour & Mystique -> Crown Victoria, Grand Marquis, Marauder & Town Car -> Escort, Tracer & ZX2 -> Installation -> LS & Thunderbird -> Removal -> Replacement
Vehicle: 2000 Ford Contour 2.5 V6 GAS
On models with anti-lock brakes, the brake system power booster must be depressurized before disconnecting any hydraulic lines or fittings. Depressurize the system by pumping the brake pedal a minimum of 25 times with the ignition in the Off position.
After performing any service work, obtain a firm brake pedal before moving the vehicle.
Continental, Cougar, Mustang, Sable & Taurus
Removal
On models with air suspension, turn service switch Off before beginning repairs.
- Raise and support rear of vehicle, then remove wheel and tire assembly.
- Remove brake hose bracket to shock unit bra...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Contour BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Ford Contour AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Ford Contour cars and light trucks from 1990+.
Disc Brakes -> Front Disc Brakes -> Tightening Specifications
Vehicle: 2000 Ford Contour SVT 2.5 V6 GAS
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Contour BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2000 Ford Contour vehicle.
|
| Access the Complete guide! |
