Auto Parts Search
We have info for following modifications of 2000 Ford Contour
- 2000 Ford Contour SVT 2.5 V6 GAS, CC:2450, CID:155, Fuel Injection, Aspiration:155, Engine VIN:, Desg:G
- 2000 Ford Contour 2.0 L4 GAS, CC:1989, CID:121, Fuel Injection, Aspiration:121, Engine VIN:, Desg:3
- 2000 Ford Contour 2.5 V6 GAS, CC:2450, CID:155, Fuel Injection, Aspiration:155, Engine VIN:, Desg:L
- 2000 Ford Contour 2.0 L4 BI-FUEL, CC:1989, CID:121, Fuel Injection, Aspiration:121, Engine VIN:, Desg:Z
MAINTENANCE LAMP RESET PROCEDURES FOR 2000 Ford Contour AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2000 Ford Contour cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Cars -> Check Engine Lamp/Malfunction Indicator Lamp (MIL)/Service Engine Soon Lamp -> 1998-2006 Models -> Keep Alive Memory (KAM) Reset & PCM Reset Less Electronic Tester -> PCM Reset Using Generic Scan Tool
Vehicle: 2000 Ford Contour 2.0 L4 GAS
This lamp should light when the ignition is turned On. After engine starts, the lamp should go off, unless a fault condition is detected by the EEC-V system. If the lamp remains On or starts to blink, a diagnostic trouble code is stored in the PCM. Following diagnosis and repair, the Check Engine/MIL lamp will automatically reset when stored diagnostic trouble codes are cleared from PCM memory. The PCM reset procedure allows the scan tool to command the PCM to clear all diagnostic trouble codes.
A temporary fault such as running out of fuel, poor quality or water in fuel or loos...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Contour MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2000 Ford Contour AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2000 Ford Contour cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Cars -> Traction Control System Warning Lamp ->
Vehicle: 2000 Ford Contour 2.0 L4 GAS
This lamp should light for a approximately 6-8 seconds when the ignition is turned On as a bulb check. If the warni...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Contour MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2000 Ford Contour AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2000 Ford Contour cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Cars -> Low Coolant Lamp ->
Vehicle: 2000 Ford Contour 2.0 L4 BI-FUEL
The low coolant warning lamp should light whenever the coolant level in the coolant recovery bottle is 1/4 to 3/4 inch or more below the cold full mark. Raise coolant level in recovery bottle to the cold full mark to turn lamp off.
On models equipped with GEM module and low coolant level warning system, t...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Contour MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2000 Ford Contour AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2000 Ford Contour cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Cars -> Check Engine Lamp/Malfunction Indicator Lamp (MIL)/Service Engine Soon Lamp -> 1998-2006 Models -> Keep Alive Memory (KAM) Reset & PCM Reset Less Electronic Tester -> PCM Reset Using Generic Scan Tool
Vehicle: 2000 Ford Contour 2.5 V6 GAS
This lamp should light when the ignition is turned On. After engine starts, the lamp should go off, unless a fault condition is detected by the EEC-V system. If the lamp remains On or starts to blink, a diagnostic trouble code is stored in the PCM. Following diagnosis and repair, the Check Engine/MIL lamp will automatically reset when stored diagnostic trouble codes are cleared from PCM memory. The PCM reset procedure allows the scan tool to command the PCM to clear all diagnostic trouble codes.
A temporary fault such as running out of fuel, poor quality or water in fuel or loos...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Contour MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2000 Ford Contour AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2000 Ford Contour cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Cars -> Air Bag Warning Lamp ->
Vehicle: 2000 Ford Contour 2.0 L4 BI-FUEL
This lamp should light for a approximately 6-8 seconds when the ignition is turned On as a bulb check. If the Air B...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Contour MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2000 Ford Contour AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2000 Ford Contour cars and light trucks sold in the U.S. from 1990+.
Ford Motor Co. Cars -> Anti-Lock Brake Warning Lamp ->
Vehicle: 2000 Ford Contour 2.0 L4 GAS
This lamp should light when the ignition is turned On. It may light for as long as 30 seconds as a bulb and system inspect. If the lamp remains lit or lights while operating the vehicle, a fault condition in the anti-lock brake system is indicated. When the lamp is lit, turn ignition Off, then start...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Contour MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2000 Ford Contour vehicle. |
Access the Complete guide! |