Auto Parts Search
We have info for following modifications of 2000 Ford Mustang
- 2000 Ford Mustang 3.8 V6 GAS, CID:232, Fuel Injection, Aspiration:232, Engine VIN:, Desg:4
- 2000 Ford Mustang GT 4.6 V8 GAS, CID:281, Fuel Injection, Aspiration:281, Engine VIN:, Desg:X
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Ford Mustang AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 Ford Mustang cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 2000 Ford Mustang 3.8 V6 GAS
Disassemble
Under no circumstances is the driveshaft assembly to be clamped in the jaws of a vise or similar holding fixture. Denting or localizing fracture can result, causing driveshaft failure during vehicle operation. Place the driveshaft on a suitable workbench, being careful not to damage the tube.
If components are not marked and installed correctly, driveline imbalance can occur. Index-mark the positions of the driveshaft components.
- Remove the driveshaft.
- Clamp the U-Joint Tool in a vise.
- Remove all four of the snap rings.
- Position the driveshaft flange yoke in th...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Mustang DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Ford Mustang AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 Ford Mustang cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 2000 Ford Mustang GT 4.6 V8 GAS
- Raise and support vehicle.
- Remove exhaust hangers from rubber mounts.
- Remove two mounting nuts on lefthand side exhaust flange.
- Lower the muffler pipe to clear flange, then move muffler forward to disconnect third exhaust hanger.
- Mark driveshaft companion flange to pinion flange for installation align...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Mustang DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Ford Mustang AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 Ford Mustang cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assemble -> Disassemble
Vehicle: 2000 Ford Mustang GT 4.6 V8 GAS
Disassemble
Under no circumstances is the driveshaft assembly to be clamped in the jaws of a vise or similar holding fixture. Denting or localizing fracture can result, causing driveshaft failure during vehicle operation. Place the driveshaft on a suitable workbench, being careful not to damage the tube.
If components are not marked and installed correctly, driveline imbalance can occur. Index-mark the positions of the driveshaft components.
- Remove the driveshaft.
- Clamp the U-Joint Tool in a vise.
- Remove all four of the snap rings.
- Position the driveshaft flange yoke in th...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Mustang DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Ford Mustang AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 Ford Mustang cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 2000 Ford Mustang 3.8 V6 GAS
- Raise and support vehicle.
- Remove exhaust hangers from rubber mounts.
- Remove two mounting nuts on lefthand side exhaust flange.
- Lower the muffler pipe to clear flange, then move muffler forward to disconnect third exhaust hanger.
- Mark driveshaft companion flange to pinion flange for installation align...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Mustang DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2000 Ford Mustang vehicle. |
Access the Complete guide! |