Auto Parts Search
We have info for following modifications of 2000 Ford Windstar
- 2000 Ford Windstar 3.0 V6 GAS, CID:182, Fuel Injection, Aspiration:182, Engine VIN:, Desg:U
- 2000 Ford Windstar 3.8 V6 GAS, CID:232, Fuel Injection, Aspiration:232, Engine VIN:, Desg:4
BRAKE SERVICE PROCEDURES FOR 2000 Ford Windstar AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Ford Windstar cars and light trucks from 1990+.
Hydraulic Brake Systems -> Description -> Bendix Hydro-Boost Brake Booster -> Bendix Hydro-Max Brake Booster -> Combination Valve -> Height Sensing Proportioning Valve -> Hydraulic Control Unit (HCU) -> Hydraulic Control Valves -> Integral Bypass Proportioning Valve -> Master Cylinder
Vehicle: 2000 Ford Windstar 3.0 V6 GAS
Master Cylinder
The master cylinder consists primarily of a hydraulic cylinder, primary and secondary hydraulic pistons and a single or dual chamber fluid reservoir. The front brakes are connected to the primary outlet port(s) and are actuated by the primary piston assembly. The rear brakes are connected to the secondary outlet port and are actuated by the secondary piston assembly.
Hydraulic Control Valves
Combination Valve
This multi-function hydraulic control unit consists primarily of a pressure differential valve, brake lamp warning switch and a proportioning valve. A pressure diff...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Windstar BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Ford Windstar AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Ford Windstar cars and light trucks from 1990+.
Power Brake Units -> Bendix Vacuum Brake Booster -> Brake Booster Replacement -> 1997-98 -> 1999-2001 -> Aerostar, Excursion, F-250HD, F-350 & F-Super Duty -> E-Series, Expedition, Explorer, Explorer Sport & Sport/Trac, F-150 & F-250LD, Mountaineer, Navigator & Villager -> Escape -> Ranger -> Windstar
Vehicle: 2000 Ford Windstar 3.8 V6 GAS
Aerostar, Excursion, F-250HD, F-350 & F-Super Duty
- Remove air cleaner housing, if required.
- Remove brake master cylinder attaching nuts.
- Position brake master cylinder aside.
- Disconnect booster vacuum hose.
- Disconnect power distribution box auxiliary relay and set aside.
- Remove fuse panel cover.
- Remove stop lamp switch self-locking pin.
- Remove stop lamp switch and brake booster pushrod from brake pedal pin.
- Remove power brake booster nuts.
- Remove power brake booster.
- Reverse procedure to install. Torque booster mounting nuts to 16-21 ft. lbs.
Escape
- Remove brake pedal pushrod cotte...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Windstar BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Ford Windstar AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Ford Windstar cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> Aerostar, Escape, E-Series, Excursion, F-250HD, F-350, F-Super Duty, Ranger & Villager -> Bendix Hydro-Max -> Expedition, Explorer, F-150, F-250LD, Mountaineer, Navigator & Windstar -> Manual Bleed -> Pressure Bleed
Vehicle: 2000 Ford Windstar 3.8 V6 GAS
Aerostar, Escape, E-Series, Excursion, F-250HD, F-350, F-Super Duty, Ranger & Villager
Bleed primary and secondary hydraulic brake systems separately, bleeding the longest line first on each system. Do not allow reservoir to run dry during bleeding operation. Never use fluid that has been drained from the hydraulic system. Ensure proper bleed sequence is followed.
On 1997-98 Villager models, the bleed sequence is lefthand front, righthand front, lefthand rear, righthand rear.
On Aerostar, E-Series, Escape, Excursion, F-250HD, F-350, F-Super Duty, Ranger and 1999-2001 Vill...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Windstar BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Ford Windstar AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Ford Windstar cars and light trucks from 1990+.
Anti-lock Brakes -> Windstar (4WABS) -> System Service -> ABS Control Module -> Brake Sensors -> Brake System Bleed -> Component Replacement -> Front -> Hydraulic Control Unit (HCU) -> Manual -> Pressure -> Rear
Vehicle: 2000 Ford Windstar 3.0 V6 GAS
Brake System Bleed
Manual
Bleed sequence is righthand rear, lefthand rear, righthand front and lefthand front.
- Clean all dirt from master cylinder filler cap, then remove cap.
- Fill brake master cylinder reservoir.
- Attach a rubber drain tube to righthand rear bleeder screw and submerge opposite end in container partially filled with clean brake fluid.
- With aid of an assistant, pump and hold pressure on brake pedal.
- Loosen righthand rear bleeder screw until stream of fluid comes out, then tighten bleeder screw.
- Repeat steps four and five until clear, bubble free fluid comes out.
- Fill brake ...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Windstar BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Ford Windstar AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Ford Windstar cars and light trucks from 1990+.
Anti-lock Brakes -> Windstar (4WABS) -> Description
Vehicle: 2000 Ford Windstar 3.8 V6 GAS
The four wheel anti-lock brake system prevents wheel lockup by automatically modulating brake pressure during an emergency stop. The system uses an ABS control module and a hydraulic control unit (HCU) to control both front and rear brakes separately. When the brakes are applied, fluid is forced from the brake master cylinder to the hydraulic control unit (HCU), then to the wheels. One circuit of the master cylinder feeds the left front and right rear brakes. The other circuit feeds the right front and left rear brakes. If the ABS control module senses that a wheel is about to lock,...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Windstar BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Ford Windstar AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Ford Windstar cars and light trucks from 1990+.
Drum Brakes -> Escape, Villager & Windstar -> Tightening Specifications
Vehicle: 2000 Ford Windstar 3.8 V6 GAS
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Windstar BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2000 Ford Windstar vehicle. |
Access the Complete guide! |