Auto Parts Search
We have info for following modifications of 2000 Ford Windstar
- 2000 Ford Windstar 3.0 V6 GAS, CID:182, Fuel Injection, Aspiration:182, Engine VIN:, Desg:U
- 2000 Ford Windstar 3.8 V6 GAS, CID:232, Fuel Injection, Aspiration:232, Engine VIN:, Desg:4
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2000 Ford Windstar AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2000 Ford Windstar cars and light trucks from 1990+
Heater Hose, Replace -> Bypass -> Inlet -> Outlet
Vehicle: 2000 Ford Windstar 3.0 V6 GAS
Inlet
- Drain cooling system into a suitable container.
- Reposition heater core inlet hose clamp at heater supply tube.
- Remove hose from heater supply tube.
- Reposition heater hose inlet clamp at heater core.
- Remove heater inlet hose from heater core.
- Remove hose from vehicle.
- Reverse procedure to install.
Outlet
- Drain cooling system into a suitable container.
- Reposition heater hose outlet clamp at heater core.
- Disconnect heater outlet hos...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Windstar RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2000 Ford Windstar AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2000 Ford Windstar cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2000 Ford Windstar 3.8 V6 GAS
Lower
- Drain cooling system into a suitable container.
- Reposition hose clamp from radiator.
- Remove radiator outlet hose from radiator.
- Reposition hose clamp from water pump.
- Remove radiator outlet hose from water pump and from vehicle.
- Reverse procedure to in...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Windstar RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2000 Ford Windstar AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2000 Ford Windstar cars and light trucks from 1990+
Heater Hose, Replace -> Bypass -> Inlet -> Outlet
Vehicle: 2000 Ford Windstar 3.8 V6 GAS
Inlet
- Drain cooling system into a suitable container.
- Reposition heater core inlet hose clamp at heater supply tube.
- Remove hose from heater supply tube.
- Reposition heater hose inlet clamp at heater core.
- Remove heater inlet hose from heater core.
- Remove hose from vehicle.
- Reverse procedure to install.
Outlet
- Drain cooling system into a suitable container.
- Reposition heater hose outlet clamp at heater core.
- Disconnect heater outlet hos...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Windstar RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2000 Ford Windstar AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2000 Ford Windstar cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2000 Ford Windstar 3.8 V6 GAS
- Drain cooling system into suitable container.
- Remove fasteners holding grill panel to upper center reinforcement and fascia, then remove grill panel.
- Remove right and left headlamp and cornering lamp assemblies.
- Disconnect and remove grill panel brackets from lower and upper center radiator supports.
- Remove and position aside the hood latch support brace from lower and upper center radiator supports.
- Remove harness cover from upper center radiator support reinforcement.
- Disconnect underhood lamp from upper center radiator support reinforcement.
- Disconnect harness from cooling fan and...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Windstar RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2000 Ford Windstar AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2000 Ford Windstar cars and light trucks from 1990+
Coolant Hose, Replace -> Lower -> Upper
Vehicle: 2000 Ford Windstar 3.0 V6 GAS
Lower
- Drain cooling system into a suitable container.
- Reposition hose clamp from radiator.
- Remove radiator outlet hose from radiator.
- Reposition hose clamp from water pump.
- Remove radiator outlet hose from water pump and from vehicle.
- Reverse procedure to in...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Windstar RADIATOR & HOSE REPLACEMENT PROCEDURES
RADIATOR & HOSE REPLACEMENT PROCEDURES FOR 2000 Ford Windstar AUTOMOBILES
Includes radiator, cooling and heater hose replacement procedures for domestic and imported 2000 Ford Windstar cars and light trucks from 1990+
Radiator, Replace
Vehicle: 2000 Ford Windstar 3.0 V6 GAS
- Drain cooling system into suitable container.
- Disengage grille opening panel pushpins.
- Disconnect cooling fan motor wiring connectors.
- Remove cooling fan and motor assembly mounting bolts.
- Position wiring harness out of way and remove cooling fan assembly.
- Disconnect overflow hose, upper radiator hose and lower radiator hose, Fig. .
- Disconnect and plug transmission fluid cooler lines from radiator.
- Remove headlamp mounting clips with a suitable pair of snap ring pliers.
- Remove turn signal retaining nut, then positio...
CLICK HERE TO GET FULL ACCESS TO 2000 Ford Windstar RADIATOR & HOSE REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2000 Ford Windstar vehicle. |
Access the Complete guide! |