Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2000 GMC Jimmy car and truck
repair procedures including GMC engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2000 GMC Jimmy automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2000 GMC Jimmy
- 2000 GMC Jimmy 4.3 V6 GAS, CID:262, Fuel Injection, Aspiration:262, Engine VIN:, Desg:W
- 2000 GMC Jimmy Envoy 4.3 V6 GAS, CID:262, Fuel Injection, Aspiration:262, Engine VIN:, Desg:W
BRAKE SERVICE PROCEDURES FOR 2000 GMC Jimmy AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 GMC Jimmy cars and light trucks from 1990+.
Power Brake Units -> Bendix Brake Booster -> Power Brake Unit Replacement -> Astro & Safari -> C & K Series -> G Series -> P Series
Vehicle: 2000 GMC Jimmy Envoy 4.3 V6 GAS
Astro & Safari
- Apply parking brake.
- Disconnect reservoir and power steering hoses from booster.
- Remove master cylinder to brake booster retaining nuts.
- Position and support master cylinder away from booster. Do not remove hydraulic lines from master cylinder.
- Remove booster rod from top of brake pedal.
- Remove booster mounting nuts from inside of vehicle.
- Remove booster assembly and gasket.
- Reverse procedure to install, noting the following:
- Torque booster mounting nuts to 27 ft. lbs.
- Torque master cylinder retaining nuts to 27 ft. lbs.
- Torque power steering hoses to booster n...
CLICK HERE TO GET FULL ACCESS TO 2000 GMC Jimmy BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 GMC Jimmy AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 GMC Jimmy cars and light trucks from 1990+.
Hydraulic Brake Systems -> Description -> Hydraulic Control Valves -> Master Cylinder
Vehicle: 2000 GMC Jimmy 4.3 V6 GAS
Master Cylinder
Some vehicles use a conventional tandem master cylinder with two hydraulic pistons operating in-line. The primary piston controls the front brake system and the secondary piston controls the rear brake system.
Other models use a master cylinder that operates the same as the conventional master cylinder, but also incorporates a quick take-up feature in the rear chamber to reduce excessive pedal travel which may result from increased fluid displacement required to move the low drag caliper piston out against the rotor.
The quick take-up uses a spring-loaded ball check val...
CLICK HERE TO GET FULL ACCESS TO 2000 GMC Jimmy BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 GMC Jimmy AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 GMC Jimmy cars and light trucks from 1990+.
Hydraulic Brake Systems -> Description -> Hydraulic Control Valves -> Master Cylinder
Vehicle: 2000 GMC Jimmy Envoy 4.3 V6 GAS
Master Cylinder
Some vehicles use a conventional tandem master cylinder with two hydraulic pistons operating in-line. The primary piston controls the front brake system and the secondary piston controls the rear brake system.
Other models use a master cylinder that operates the same as the conventional master cylinder, but also incorporates a quick take-up feature in the rear chamber to reduce excessive pedal travel which may result from increased fluid displacement required to move the low drag caliper piston out against the rotor.
The quick take-up uses a spring-loaded ball check val...
CLICK HERE TO GET FULL ACCESS TO 2000 GMC Jimmy BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 GMC Jimmy AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 GMC Jimmy cars and light trucks from 1990+.
Disc Brakes -> Delco Single Piston Sliding Caliper -> Brake Pad Service -> Installation -> Removal
Vehicle: 2000 GMC Jimmy Envoy 4.3 V6 GAS
Removal
- Remove caliper as outlined under "Caliper Service."
- Remove inboard pad with retainer spring.
- Remove outboard pad and position caliper on front suspension so brake hose will not support weight of caliper.
- Remove two sleeves from inboard ears of caliper.
- Remove four rubber bushings from grooves in each of caliper ears.
Installation
- Lubricate new sleeves, rubber bushings, bushing grooves and mounting bolt ends with lubricant part No. 19010909, or equivalent.
- Install new bushings and sleeves in caliper e...
CLICK HERE TO GET FULL ACCESS TO 2000 GMC Jimmy BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 GMC Jimmy AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 GMC Jimmy cars and light trucks from 1990+.
Disc Brakes -> Delco Single Piston Sliding Caliper -> Caliper Service -> Assemble -> Blazer, Bravada & Jimmy -> Disassemble -> Front -> Inspection -> Installation -> Rear -> Removal -> Sierra & Silverado
Vehicle: 2000 GMC Jimmy 4.3 V6 GAS
Removal
Front
- Siphon brake fluid out of master cylinder until fluid level is approximately 1/3 full, this will prevent fluid overflow when caliper piston is pushed back into its bore.
- Raise and support vehicle, then remove wheels.
- Push piston back into its bore using suitable C-clamp, Fig. .
- Remove two caliper mounting bolts and lift caliper off of rotor.
Rear
Blazer, Bravada & Jimmy
- Raise and support vehicle.
- Mark position of wheel to hub for installation reference.
- Remove wheel assembly.
- Remove mounting bolt and disconnect brake hose fitting from caliper. Discard gaskets and plug brake h...
CLICK HERE TO GET FULL ACCESS TO 2000 GMC Jimmy BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 GMC Jimmy AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 GMC Jimmy cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service -> Assemble -> Bendix Master Cylinder -> Delco Master Cylinder -> Disassemble -> Tracker Master Cylinder -> Wheel Cylinder
Vehicle: 2000 GMC Jimmy 4.3 V6 GAS
Delco Master Cylinder
When performing the following procedures, refer to Figs. and noting that the composite reservoir may vary in design.
Disassemble
- Remove master cylinder from vehicle.
- Remove reservoir cover and diaphragm. Discard old brake fluid in reservoir.
- Inspect cover and diaphragm. Replace if cut, cracked or deformed.
- Remove fluid level switch and proportioning valve assembly, if equipped.
- Depress primary piston and remove lock ring.
- Plug primary fluid outlet (outlet nearest to cowl when master cylinder is installed), then apply compressed air into secondary fluid outlet t...
CLICK HERE TO GET FULL ACCESS TO 2000 GMC Jimmy BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2000 GMC Jimmy vehicle.
|
| Access the Complete guide! |
