Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2000 GMC Savana 2500 car and truck
repair procedures including GMC engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2000 GMC Savana 2500 automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2000 GMC Savana 2500
- 2000 GMC Savana 2500 5.7 V8 GAS, CID:350, Fuel Injection, Aspiration:350, Engine VIN:, Desg:R
- 2000 GMC Savana 2500 4.3 V6 GAS, CID:262, Fuel Injection, Aspiration:262, Engine VIN:, Desg:W
- 2000 GMC Savana 2500 5.0 V8 GAS, CID:305, Fuel Injection, Aspiration:305, Engine VIN:, Desg:M
- 2000 GMC Savana 2500 6.5 V8 DIESEL, CID:395, Fuel Injection, Aspiration:395, Engine VIN:, Desg:F
BRAKE SERVICE PROCEDURES FOR 2000 GMC Savana 2500 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 GMC Savana 2500 cars and light trucks from 1990+.
Power Brake Units -> Delco Brake Booster -> Troubleshooting -> Brakes Grab -> Hard Pedal -> Slow Or No Release
Vehicle: 2000 GMC Savana 2500 5.7 V8 GAS
Hard Pedal
- Internal vacuum leak.
- Faulty control valve.
- Broken or damaged hydraulic brake lines.
- Collapsed or damaged vacuum hose.
- Plugged or loose vacuum fitting.
- Bad stud welds on front or rear housing on power head.
- Faulty booster diaphragm.
- Restricted air filter element.
- Worn or distorted reaction plate or levers.
- Cracked or broken pow...
CLICK HERE TO GET FULL ACCESS TO 2000 GMC Savana 2500 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 GMC Savana 2500 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 GMC Savana 2500 cars and light trucks from 1990+.
Power Brake Units -> Bendix Brake Booster -> Troubleshooting -> Accumulator Leak-Down, System Does Not Hold Charge -> Grabby Brakes Or Booster Chatters/Pedal Vibrates -> Slow Brake Pedal Return
Vehicle: 2000 GMC Savana 2500 5.0 V8 GAS
Slow Brake Pedal Return
- Excessive seal friction in booster.
- Faulty spool action.
- Restriction in return line from booster to pump reservoir.
- Damaged input rod end.
Grabby Brakes Or Booster Chatters/Pedal Vibrates
- Faulty spool action caused by contamination in sys...
CLICK HERE TO GET FULL ACCESS TO 2000 GMC Savana 2500 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 GMC Savana 2500 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 GMC Savana 2500 cars and light trucks from 1990+.
Disc Brakes -> Delco Single Piston Sliding Caliper -> Rotor Replacement -> 2WD Models -> 4WD Models -> Astro, Blazer, Bravada, Jimmy, K1500/2500 & T Series Pickup -> Except Montana, Silhouette, Trans Sport & Venture -> Front -> K3500 -> Montana, Silhouette, Trans Sport & Venture -> Rear
Vehicle: 2000 GMC Savana 2500 5.0 V8 GAS
2WD Models
Except Montana, Silhouette, Trans Sport & Venture
Front
- Raise and support vehicle.
- Remove tire and wheel assembly.
- Remove caliper as outlined under "Caliper Service."
- Remove grease cap from hub/rotor, Fig. .
- Remove cotter pin, nut and washer.
- Remove hub/rotor from spindle, being careful not to damage spindle threads or outer bearing.
- Reverse procedure to install, noting the following:
- Apply high-temperature wheel bearing grease to inner and outer wheel bearings.
- Torque nut to 12 ft. lbs. while turning wheel assembly forward by hand, back nut off one flat or until hole in spindle...
CLICK HERE TO GET FULL ACCESS TO 2000 GMC Savana 2500 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 GMC Savana 2500 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 GMC Savana 2500 cars and light trucks from 1990+.
Power Brake Units -> Delco Brake Booster -> Troubleshooting -> Brakes Grab -> Hard Pedal -> Slow Or No Release
Vehicle: 2000 GMC Savana 2500 6.5 V8 DIESEL
Hard Pedal
- Internal vacuum leak.
- Faulty control valve.
- Broken or damaged hydraulic brake lines.
- Collapsed or damaged vacuum hose.
- Plugged or loose vacuum fitting.
- Bad stud welds on front or rear housing on power head.
- Faulty booster diaphragm.
- Restricted air filter element.
- Worn or distorted reaction plate or levers.
- Cracked or broken pow...
CLICK HERE TO GET FULL ACCESS TO 2000 GMC Savana 2500 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 GMC Savana 2500 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 GMC Savana 2500 cars and light trucks from 1990+.
Power Brake Units -> Delco Brake Booster -> Description -> Operation -> Single Diaphragm Type -> Tandem (Dual) Diaphragm Type
Vehicle: 2000 GMC Savana 2500 5.7 V8 GAS
In order to properly service power brake systems, a thorough understanding of the various power assist systems is necessary. These systems provide a mechanical assist, acting to increase the force applied to the master cylinder piston by the driver while decreasing the effort necessary to obtain acceptable stopping performance. Two basic types of power assist mechanisms are used: vacuum assist diaphragm assemblies which use engine vacuum and in some cases vacuum from an external vacuum pump, and hydraulic assist assemblies which use hydraulic pressure developed by an external pump (...
CLICK HERE TO GET FULL ACCESS TO 2000 GMC Savana 2500 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 GMC Savana 2500 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 GMC Savana 2500 cars and light trucks from 1990+.
Hydraulic Brake Systems -> Description -> Hydraulic Control Valves -> Master Cylinder
Vehicle: 2000 GMC Savana 2500 5.7 V8 GAS
Master Cylinder
Some vehicles use a conventional tandem master cylinder with two hydraulic pistons operating in-line. The primary piston controls the front brake system and the secondary piston controls the rear brake system.
Other models use a master cylinder that operates the same as the conventional master cylinder, but also incorporates a quick take-up feature in the rear chamber to reduce excessive pedal travel which may result from increased fluid displacement required to move the low drag caliper piston out against the rotor.
The quick take-up uses a spring-loaded ball check val...
CLICK HERE TO GET FULL ACCESS TO 2000 GMC Savana 2500 BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2000 GMC Savana 2500 vehicle.
|
| Access the Complete guide! |
