Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2000 Infiniti QX4 car and truck
repair procedures including Infiniti engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2000 Infiniti QX4 automobile. Try the Automotix DIY solution today!
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Infiniti QX4 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 Infiniti QX4 cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2000 Infiniti QX4 3.3 V6 GAS
Front
- Raise and support vehicle and support it with safety stands in proper locations.
- Remove wheel nuts and front wheels.
- Remove snap ring.
- Remove side flange mounting bolt and separate shaft.
- Remove transverse link nut and bolts.
- Separate wheel hub and bearing assembly from driveshaft by lightly tapping end with suitable tool and wood block, then remov...
CLICK HERE TO GET FULL ACCESS TO 2000 Infiniti QX4 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Infiniti QX4 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 Infiniti QX4 cars and light trucks from 1990+.
DRIVESHAFT U-JOINT, Replace -> Assembly -> Disassemble
Vehicle: 2000 Infiniti QX4 3.3 V6 GAS
Disassemble
- Mark shaft and flange or yoke.
- Remove snap ring.
- Remove pushed out journal bearing by lightly tapping yoke with a hammer. Do not damage journal and yoke hole.
- Remove bearing at opposite side in above operation. Place reference mark on disassembled parts so that they can be reinstalled in their original positions from which they were removed.
Assembly
- Assemble journal bearing and apply appro...
CLICK HERE TO GET FULL ACCESS TO 2000 Infiniti QX4 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Infiniti QX4 AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 Infiniti QX4 cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 2000 Infiniti QX4 3.3 V6 GAS
- Place vehicle in neutral and release parking brake.
- Raise vehicle off ground and support it with safety stands in proper locations.
- Mark rear pinion flange. Its recommended to use paint for reference marks. Never damage driveshaft flange and companion flange on front drive.
- R...
CLICK HERE TO GET FULL ACCESS TO 2000 Infiniti QX4 DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
