Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2000 Land Rover Discovery car and truck
repair procedures including Land Rover engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2000 Land Rover Discovery automobile. Try the Automotix DIY solution today!
MAINTENANCE LAMP RESET PROCEDURES FOR 2000 Land Rover Discovery AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2000 Land Rover Discovery cars and light trucks sold in the U.S. from 1990+.
Land Rover -> Stability Control System Warning Indicator ->
Vehicle: 2000 Land Rover Discovery 4.0 V8 GAS
The Stability Control System warning indicator should light when the ignition switch is placed in the On position and go out when after approximately 4 seconds. If the lamp flashes contin...
CLICK HERE TO GET FULL ACCESS TO 2000 Land Rover Discovery MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2000 Land Rover Discovery AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2000 Land Rover Discovery cars and light trucks sold in the U.S. from 1990+.
Land Rover -> Emission Maintenance Reminder Indicator ->
Vehicle: 2000 Land Rover Discovery 4.0 V8 GAS
The emission maintenance reminder is designed to activate at 52,500 miles and 105,000 miles and will illuminate a Service Engine warning lamp on the instrument cluster.
The emission maintenance reminder must be reset after the required service has been performed and a new tamper-proof label should be installed. The reminder reset procedure is a...
CLICK HERE TO GET FULL ACCESS TO 2000 Land Rover Discovery MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2000 Land Rover Discovery AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2000 Land Rover Discovery cars and light trucks sold in the U.S. from 1990+.
Land Rover -> Brake (Amber)/Emergency Brake Assist Indicator Lamp ->
Vehicle: 2000 Land Rover Discovery 4.0 V8 GAS
The Brake (Amber)/Emergency Brake Assist Indicator lamp should illuminate when the ignition switch is placed in the On position to indicate the lamp is operational. After the engine has been started, the warning lamp should go off. If warning l...
CLICK HERE TO GET FULL ACCESS TO 2000 Land Rover Discovery MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2000 Land Rover Discovery AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2000 Land Rover Discovery cars and light trucks sold in the U.S. from 1990+.
Land Rover -> Anti-Lock Brake System Warning Lamp ->
Vehicle: 2000 Land Rover Discovery 4.0 V8 GAS
The ABS warning lamp should light when the ignition switch is placed in the On position and go out when after approximately 4 seconds. If the lamp remains illuminated or comes on while ...
CLICK HERE TO GET FULL ACCESS TO 2000 Land Rover Discovery MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2000 Land Rover Discovery AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2000 Land Rover Discovery cars and light trucks sold in the U.S. from 1990+.
Land Rover -> Dynamic Stability Control (DSC) Indicator Lamp ->
Vehicle: 2000 Land Rover Discovery 4.0 V8 GAS
The DSC warning lamp should light when the ignition switch is placed in the On position and go out when after the engine has been started. The DSC lamp will remain On with the engine started if the DSC switch has been pressed switching Off the DSC system but the traction control system is still active. The lamp will flash when ...
CLICK HERE TO GET FULL ACCESS TO 2000 Land Rover Discovery MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2000 Land Rover Discovery AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2000 Land Rover Discovery cars and light trucks sold in the U.S. from 1990+.
Land Rover -> Check Engine Lamp ->
Vehicle: 2000 Land Rover Discovery 4.0 V8 GAS
The Check Engine/Service Engine Soon lamp should illuminate when the ignition switch is placed in the On position to indicate the lamp is operational. After the engine has been started, the warning lamp should go off. If warning lamp comes on while the engine is running, a fault in the fuel injection and or engine control system is present. After system diagnosis and repairs have been completed, use scan tool to clear control module memory. Follow scan tool manufacturers instructions. On models less OBD II, the PCM m...
CLICK HERE TO GET FULL ACCESS TO 2000 Land Rover Discovery MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2000 Land Rover Discovery vehicle.
|
| Access the Complete guide! |
