Auto Parts Search
BRAKE SERVICE PROCEDURES FOR 2000 MERCEDES-BENZ C280 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 MERCEDES-BENZ C280 cars and light trucks from 1990+.
Disc Brakes -> Adjustments -> Parking Brake
Vehicle: 2000 MERCEDES-BENZ C280 2.8 V6 GAS
Parking Brake
- Raise and support vehicle rear.
- On SL500, SL600 and SLK230 models, loosen adjusting bolt.
- On all models, remove one wheel bolt on both rear wheels. Light alloy wheels must be removed.
- Turn adjuster until brake shoes contact and it is no longer possible to turn rear wheel, noting the following:
- Use suitable 0.1772 in...
CLICK HERE TO GET FULL ACCESS TO 2000 MERCEDES-BENZ C280 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 MERCEDES-BENZ C280 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 MERCEDES-BENZ C280 cars and light trucks from 1990+.
Disc Brakes -> Brake Pad Service -> C230 -> C280, E300, E320, E430 & SLK230 -> Fixed Caliper Brake Pad, Replace -> Floating Caliper Brake Pad, Replace
Vehicle: 2000 MERCEDES-BENZ C280 2.8 V6 GAS
Floating Caliper Brake Pad, Replace
C230
- Disconnect wear sensor connector.
- On models equipped with cam on housing, remove lower mounting bolt, steady sliding pin and remove floating caliper, securing with suitable hook.
- On all models, inspect boots for damage and replace as required.
- Remove brake pads.
- Remove some brake fluid from reservoir.
- Pull wear sensor out of lining back plate.
- Push piston back using resetting tool No. 000 589 52 43 00, or equivalent.
- Reverse procedure to install, noting the following:
- Clean brake pad contact surface in carrier and cylinder housing.
- On models equip...
CLICK HERE TO GET FULL ACCESS TO 2000 MERCEDES-BENZ C280 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 MERCEDES-BENZ C280 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 MERCEDES-BENZ C280 cars and light trucks from 1990+.
Power Brake Units -> Diagnosis & Testing -> Brake Booster -> Non-Return Valve
Vehicle: 2000 MERCEDES-BENZ C280 2.8 V6 GAS
Non-Return Valve
- Disconnect brake booster vacuum line.
- Connect pressure tester tool No. 201 589 13 21 00, or equivalent, between brake booster and vacuum line.
- Start engine and create 10.9-11.6 psi vacuum by opening and suddenly releasing throttle.
- Turn engine off.
- If vacuum drops more than 2.9 psi in 30 seconds, replace vacuum line.
- Torque vacuum line to 22 ft. lbs.
Brake Booster
- Disconnect brake booster vacuum line.
- Connect pressure tester tool No. 201 589 13 21 00, or equivalent, between brake booster and vacuum line.
- Connect suitable pressure tester at brake caliper.
- Connect Bosch ...
CLICK HERE TO GET FULL ACCESS TO 2000 MERCEDES-BENZ C280 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 MERCEDES-BENZ C280 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 MERCEDES-BENZ C280 cars and light trucks from 1990+.
Power Brake Units -> Precautions -> Battery Ground Cable
Vehicle: 2000 MERCEDES-BENZ C280 2.8 V6 GAS
Battery Ground Cable
Prior to service, dis...
CLICK HERE TO GET FULL ACCESS TO 2000 MERCEDES-BENZ C280 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 MERCEDES-BENZ C280 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 MERCEDES-BENZ C280 cars and light trucks from 1990+.
Disc Brakes -> Brake System Bleed
Vehicle: 2000 MERCEDES-BENZ C280 2.8 V6 GAS
Refer to procedure as ou...
CLICK HERE TO GET FULL ACCESS TO 2000 MERCEDES-BENZ C280 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 MERCEDES-BENZ C280 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 MERCEDES-BENZ C280 cars and light trucks from 1990+.
Disc Brakes -> Parking Brake Service -> Foot Control Cable, Replace -> Foot Control, Replace -> Hand Lever, Replace -> Parking Brake Rear Control Cable, Replace -> Parking Brake Shoes, Replace -> SLK230
Vehicle: 2000 MERCEDES-BENZ C280 2.8 V6 GAS
Foot Control, Replace
- On S320, S420, SL500 and SL600 and 1998-99 CL500, CL600, S500, and S600 models, remove exhaust system heat shield.
- On C43, C230, C280, E300, E320 and E430 models,remove cover panel under rear squab.
- On S320 and S420 and 1998-99 CL500, CL600, S500 and S600 models, proceed as follows:
- Disconnect exhaust system as required.
- Turn preloading automatic slack adjuster eccentric pin counterclockwise approximately 1/2 turn using suitable Allen wrench.
- At same time, push pin back longitudinal slot until spring-loaded locking eccentric locks into spring clip position ...
CLICK HERE TO GET FULL ACCESS TO 2000 MERCEDES-BENZ C280 BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2000 MERCEDES-BENZ C280 vehicle. |
Access the Complete guide! |