Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2000 Suzuki Swift car and truck
repair procedures including Suzuki engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2000 Suzuki Swift automobile. Try the Automotix DIY solution today!
BRAKE SERVICE PROCEDURES FOR 2000 Suzuki Swift AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Suzuki Swift cars and light trucks from 1990+.
Drum Brakes -> Brake Service -> Brake Drum, Replace -> Brake Shoe, Replace -> Esteem -> Esteem & Swift -> Grand Vitara, Sidekick, Vitara & X-90 -> Swift -> Wheel Cylinder, Replace
Vehicle: 2000 Suzuki Swift 1.3 L4 GAS
Brake Drum, Replace
Esteem
- Raise and support vehicle, then remove wheel.
- Remove drum screws.
- Release parking brake lever.
- Remove parking brake lever cover, then loosen parking brake cable locking nut.
- To increase clearance between shoe and drum, proceed as follows:
- Remove backing plate plug.
- Insert screwdriver into plug hole till its tip contacts shoe hold-down spring, then push hold-down spring as shown, Fig. .
- Remove brake drum by fitting two 8 mm bolts into holes on drum and extracting drum off wheel hub.
- Reverse procedure to install, noting the following:
- Before installing drum, maximize...
CLICK HERE TO GET FULL ACCESS TO 2000 Suzuki Swift BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Suzuki Swift AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Suzuki Swift cars and light trucks from 1990+.
Anti-lock Brakes -> Description
Vehicle: 2000 Suzuki Swift 1.3 L4 GAS
The ABS controls the fluid pressure applied to the wheel cylinder of each brake from the master cylinder so that each wheel is not locked even when hard braking...
CLICK HERE TO GET FULL ACCESS TO 2000 Suzuki Swift BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Suzuki Swift AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Suzuki Swift cars and light trucks from 1990+.
Power Brake Units -> Power Brake Unit Service -> Brake Booster Overhaul -> Esteem, Grand Vitara, Sidekick, Vitara & X-90 -> Power Brake Unit, Replace -> Swift
Vehicle: 2000 Suzuki Swift 1.3 L4 GAS
Power Brake Unit, Replace
- Remove master cylinder from booster as outlined under " Master Cylinder, Replace," in "Hydraulic Brakes."
- Disconnect pushrod clevis from brake pedal arm.
- Disconnect vacuum hose from booster.
- Remove booster attaching nuts, then the booster assembly.
- Reverse procedure to install, then ensure brake pedal height and pedal travel is correct as outlined under "Brake Pedal Height, Adjust," and "Brake Pedal Travel Check" in "Hydraulic Brakes."
Brake Booster Overhaul
Swift
Refer to Fig., when performing this procedure.
- Remove piston rod from booster, then the pushrod clev...
CLICK HERE TO GET FULL ACCESS TO 2000 Suzuki Swift BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Suzuki Swift AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Suzuki Swift cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> Esteem & Swift -> Grand Vitara, Sidekick, Vitara & X-90 -> Master Cylinder -> System Bleed
Vehicle: 2000 Suzuki Swift 1.3 L4 GAS
Brake fluid is extremely damaging to paint. If fluid should accidentally touch painted surface, immediately wipe fluid from paint and clean painted surface.
System Bleed
Esteem & Swift
The hydraulic lines of the brake system are based on a diagonal split system. When a brake line or hose is disconnected, bleeding operation must be performed at both ends of the line disconnected.
- Fill master cylinder reservoir. Reservoir should be kept at least half full during bleeding operation.
- Remove bleeder plug cap, then attach vinyl tube to bleeder plug of component to be bled. Insert other ...
CLICK HERE TO GET FULL ACCESS TO 2000 Suzuki Swift BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Suzuki Swift AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Suzuki Swift cars and light trucks from 1990+.
Disc Brakes -> Caliper Service -> Assemble -> Disassemble -> Installation -> Removal
Vehicle: 2000 Suzuki Swift 1.3 L4 GAS
Removal
- Remove approximately 2/3 of brake fluid from master cylinder.
- Raise and support vehicle.
- Mark relationship between front wheel and axle, then remove wheel and tire assembly.
- Remove inlet fitting attaching bolt, copper washer and inlet fitting from caliper housing. Plug opening in inlet fitting to prevent fluid loss and contamination. Do not crimp brake hose, as this may damage internal structure of hose. If only shoe and lining assemblies are to be replaced, do not disconnect brake line fitting from caliper.
- Remove caliper slide pins and caliper.
- Remove shoe and lining assembl...
CLICK HERE TO GET FULL ACCESS TO 2000 Suzuki Swift BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2000 Suzuki Swift AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2000 Suzuki Swift cars and light trucks from 1990+.
Hydraulic Brake Systems -> Diagnosis & Testing -> Brake Fluid Leakage Inspection -> Road Test -> Substandard Or Contaminated Brake Fluid
Vehicle: 2000 Suzuki Swift 1.3 L4 GAS
Road Test
Brakes should be tested on dry, clean, smooth and reasonable level roadway which is not crowned. Road test brakes by making brake applications with both light and heavy pedal forces at various speeds to determine if car stops evenly and effectively.
Also road test vehicle to see if it pulls to one side without brake application. If it does, check tire pressure, front end alignment and front suspension attachments for looseness.
Brake Fluid Leakage Inspection
Check master cylinder fluid levels. While a slight drop in reservoir level does result from normal lining wear, ...
CLICK HERE TO GET FULL ACCESS TO 2000 Suzuki Swift BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
