Auto Parts Search
We have info for following modifications of 2000 Toyota Celica
- 2000 Toyota Celica 1.8 L4 GAS, CC:1795, Fuel Injection
- 2000 Toyota Celica 1.8 L4 GAS, CC:1794, Fuel Injection, Engine VIN:, Desg:R
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Toyota Celica AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 Toyota Celica cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 2000 Toyota Celica 1.8 L4 GAS
Front
- Raise and support vehicle.
- Remove front wheel assembly.
- Remove brake caliper and disc brake attaching bolts, Fig. .
- Inspect backlash using suitable dial indicator, Fig. . Maximum deviation is .0020 inch, replace as required.
- Inspect deviation at surface of axle hub outside bolt, Fig. . Maximum backlash is .0028 inch, replace as required.
- Remove driveshaft lock nut.
- Remove ABS speed sensor.
- Loosen lower side shock absorber nuts, Fig. .
- Remove cotter pin and attaching nut from tie rod end to steering knuckle.
- Disconnect tie rod end from steering knuckle using service tool No. 0...
CLICK HERE TO GET FULL ACCESS TO 2000 Toyota Celica DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2000 Toyota Celica AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2000 Toyota Celica cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front -> Rear
Vehicle: 2000 Toyota Celica 1.8 L4 GAS
Front
- Raise and support vehicle.
- Remove front wheel assembly.
- Remove brake caliper and disc brake attaching bolts, Fig. .
- Inspect backlash using suitable dial indicator, Fig. . Maximum deviation is .0020 inch, replace as required.
- Inspect deviation at surface of axle hub outside bolt, Fig. . Maximum backlash is .0028 inch, replace as required.
- Remove driveshaft lock nut.
- Remove ABS speed sensor.
- Loosen lower side shock absorber nuts, Fig. .
- Remove cotter pin and attaching nut from tie rod end to steering knuckle.
- Disconnect tie rod end from steering knuckle using service tool No. 0...
CLICK HERE TO GET FULL ACCESS TO 2000 Toyota Celica DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 2000 Toyota Celica vehicle. |
Access the Complete guide! |