Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2001 GMC Yukon car and truck
repair procedures including GMC engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2001 GMC Yukon automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2001 GMC Yukon
- 2001 GMC Yukon 4.8 V8 GAS, CID:294, Fuel Injection, Aspiration:294, Engine VIN:, Desg:V
- 2001 GMC Yukon 5.3 V8 GAS, CID:323, Fuel Injection, Aspiration:323, Engine VIN:, Desg:T
- 2001 GMC Yukon Denali 6.0 V8 GAS, CID:364, Fuel Injection, Aspiration:364, Engine VIN:, Desg:U
- 2001 GMC Yukon Denali XL 6.0 V8 GAS, CID:364, Fuel Injection, Aspiration:364, Engine VIN:, Desg:U
BRAKE SERVICE PROCEDURES FOR 2001 GMC Yukon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 GMC Yukon cars and light trucks from 1990+.
Disc Brakes -> Delco Dual Piston Sliding Caliper -> Brake Pad Service
Vehicle: 2001 GMC Yukon 5.3 V8 GAS
The procedures to remove and install the brake pads are outlined under "Cali... "
CLICK HERE TO GET FULL ACCESS TO 2001 GMC Yukon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 GMC Yukon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 GMC Yukon cars and light trucks from 1990+.
Drum Brakes -> Precautions
Vehicle: 2001 GMC Yukon Denali 6.0 V8 GAS
When working on or around brake assemblies, care must be taken to prevent breathing asbestos dust, as many manufacturers incorporate asbestos fibers in the production of brake linings. During routine service operations, the amount of asbestos dust from brake lining wear is at a low level because of a chemical breakdown during use and a few precautions will minimize exposure. Do not sand or grind brake linings unless suitable local exhaust ventilation equipment is used to prevent ...
CLICK HERE TO GET FULL ACCESS TO 2001 GMC Yukon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 GMC Yukon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 GMC Yukon cars and light trucks from 1990+.
Disc Brakes -> Delco Dual Piston Sliding Caliper -> Precautions -> Brake Disc Service -> Brake Lines & Linings -> Brake Roughness -> General
Vehicle: 2001 GMC Yukon 4.8 V8 GAS
Brake Lines & Linings
Remove one of the front wheels and inspect the brake disc, caliper and linings.
Do not allow any oil or grease on the linings. It is recommended that linings be replaced in sets when worn or damaged.
If the caliper is cracked or fluid leakage through the casting is evident, it must be replaced as a unit.
Brake Roughness
The most common cause of brake chatter on disc brakes is a variation in thickness of the disc. If roughness or vibration is encountered during highway operation or if pedal pumping is experienced at low speeds, the disc may have excessive thickness v...
CLICK HERE TO GET FULL ACCESS TO 2001 GMC Yukon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 GMC Yukon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 GMC Yukon cars and light trucks from 1990+.
Drum Brakes -> Brake Service -> Astro, Bravada, S & T Series & Safari -> Aztek -> C & K Series -> Duo-Servo -> G Series -> Installation -> Montana, Silhouette, Trans Sport & Venture -> P Series -> Removal -> Single-Servo -> Tracker
Vehicle: 2001 GMC Yukon 4.8 V8 GAS
C & K Series
Duo-Servo
Removal
- Raise and support vehicle.
- Mark relationship of wheel to hub, then remove tire and wheel assembly.
- On models equipped with full-floating axles, remove hub and drum assembly as described in "Drive Axles."
- On models equipped with semi-floating axles, proceed as follows:
- Install pin into park brake lever.
- Mark relationship of drum to axle.
- Remove rear brake drum retainers, as required.
- Remove rear brake drum.
- On all models, remove return springs and shoe guide, Fig. .
- Remove brake hold down springs and pins.
- Disconnect actuator lever and pivot.
- Remove lever return spri...
CLICK HERE TO GET FULL ACCESS TO 2001 GMC Yukon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 GMC Yukon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 GMC Yukon cars and light trucks from 1990+.
Hydraulic Brake Systems -> Description -> Hydraulic Control Valves -> Master Cylinder
Vehicle: 2001 GMC Yukon 4.8 V8 GAS
Master Cylinder
Some vehicles use a conventional tandem master cylinder with two hydraulic pistons operating in-line. The primary piston controls the front brake system and the secondary piston controls the rear brake system.
Other models use a master cylinder that operates the same as the conventional master cylinder, but also incorporates a quick take-up feature in the rear chamber to reduce excessive pedal travel which may result from increased fluid displacement required to move the low drag caliper piston out against the rotor.
The quick take-up uses a spring-loaded ball check val...
CLICK HERE TO GET FULL ACCESS TO 2001 GMC Yukon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 GMC Yukon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 GMC Yukon cars and light trucks from 1990+.
Power Brake Units -> Delco Brake Booster -> Power Brake Unit Replacement -> Bravada, S & T Series -> C & K Series -> G Series -> Montana, Silhouette, Trans Sport & Venture
Vehicle: 2001 GMC Yukon 5.3 V8 GAS
G Series
- Remove brake pipes from master cylinder. Plug pipes to prevent fluid contamination.
- Remove master cylinder attaching nuts and position master cylinder aside.
- Disconnect stop lamp switch electrical connector.
- Remove stop lamp switch retainer from brake pedal pin, then the stop lamp switch from brake pedal support.
- Disconnect power brake unit pushrod from brake pedal.
- Remove attaching nuts, then the power brake unit.
- Reverse procedure to install.
- Torque booster retaining nuts to 27 ft. lbs.
- Torque master cylinder retaining nuts to 27 ft. lbs.
- Torque brake pipe fittings...
CLICK HERE TO GET FULL ACCESS TO 2001 GMC Yukon BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2001 GMC Yukon vehicle.
|
| Access the Complete guide! |
