Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2001 Honda Civic car and truck
repair procedures including Honda engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2001 Honda Civic automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2001 Honda Civic
- 2001 Honda Civic DX 1.7 L4 GAS, CC:1668, Fuel Injection
- 2001 Honda Civic EX 1.7 L4 GAS, CC:1668, Fuel Injection
- 2001 Honda Civic HX 1.7 L4 GAS, CC:1668, Fuel Injection
- 2001 Honda Civic LX 1.7 L4 GAS, CC:1668, Fuel Injection
- 2001 Honda Civic GX 1.7 L4 CNG, CC:1668, Fuel Injection
BRAKE SERVICE PROCEDURES FOR 2001 Honda Civic AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Honda Civic cars and light trucks from 1990+.
Disc Brakes -> Description
Vehicle: 2001 Honda Civic DX 1.7 L4 GAS
The caliper assembly consists of a pin slider caliper housing, inner and outer pad and lining assemblies and a single piston. The caliper slides on two pins which also act as attaching bolts between the caliper and caliper br...
CLICK HERE TO GET FULL ACCESS TO 2001 Honda Civic BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Honda Civic AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Honda Civic cars and light trucks from 1990+.
Drum Brakes -> Brake Service -> Inspection -> Installation -> Removal
Vehicle: 2001 Honda Civic HX 1.7 L4 GAS
Removal
- Refer to Figs. through when replacing brake shoes.
- Raise and support rear of vehicle, then remove tire and wheel assemblies.
- Loosen parking brake, then remove rear brake drums.
- Remove tension pins by pushing retainer springs while turning.
- Lower brake shoe assembly being careful not to damage wheel cylinder dust cover, then remove lower return spring.
- Disconnect parking brake cable from parking brake lever, then remove brake shoe assembly.
- Remove upper return spring, self-adjuster lever and spring, then separate brake shoes.
- Remove wave washer, parking brake lever and pivot pin ...
CLICK HERE TO GET FULL ACCESS TO 2001 Honda Civic BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Honda Civic AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Honda Civic cars and light trucks from 1990+.
Power Brake Units -> Power Brake Unit Service -> Accord, Odyssey & Prelude -> Civic, CR-V, del Sol & S2000 -> Power Booster Overhaul -> Power Booster, Replace
Vehicle: 2001 Honda Civic HX 1.7 L4 GAS
Power Booster, Replace
Accord, Odyssey & Prelude
- Remove master cylinder as outlined under "Hydraulic Brake Systems."
- Disconnect vacuum hose from booster, then remove vacuum hose bracket.
- Remove throttle control cable bracket, then disconnect engine wire harness connectors.
- On models equipped with manual transmission, remove clutch reservoir and reservoir bracket. Do not disconnect clutch hose from reservoir.
- On all models, loosen pushrod locknut, then remove cotter pin and joint pin.
- Remove clevis from operating rod of brake booster, then four booster mounting nuts.
- Pull brake bo...
CLICK HERE TO GET FULL ACCESS TO 2001 Honda Civic BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Honda Civic AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Honda Civic cars and light trucks from 1990+.
Anti-lock Brakes -> Diagnosis & Testing -> 1997 -> 1997 Accord -> 1997-2000 -> 1997-2000 Civic -> 1997-2001 -> 1997-2001 CR-V -> 1997-98 -> 1997-98 Odyssey -> 1998-2002 -> 1998-2002 Accord -> 1999-2002 -> 1999-2002 Odyssey -> 2001-02 -> 2001-02 Civic -> 2002 -> 2002 CR-V -> Accessing Diagnostic Trouble Codes -> Accord -> Accord & Odyssey -> Accord & S2000 -> Civic -> Clearing Diagnostic Trouble Codes -> CR-V -> del Sol -> Diagnostic Tests -> Diagnostic Trouble Code Interpretation -> Function Test -> Modulator Function Inspection -> Odyssey -> Prelude -> S2000 -> Solenoid Leak Test -> System Tests -> Wheel Sensor Signal Confirmation -> Wiring Diagrams
Vehicle: 2001 Honda Civic DX 1.7 L4 GAS
Accessing Diagnostic Trouble Codes
Accord
1997
- Connect SCS service connector to service check connector under glove compartment, Fig. .
- Turn ignition switch on, but do not start engine.
- Record blinking frequency of ABS indicator light. Blinking frequency indicates diagnostic trouble code. Memory of diagnostic trouble code is erased if connector is disconnected from ABS control unit.
1998-2002
- Connect PGM tester to 16-pin DLC located behind driver's side kick panel with ignition switch off.
- Select "SCS" on the display, then press "Yes" at "Service Check Signal" mode.
- Turn ignition switch to...
CLICK HERE TO GET FULL ACCESS TO 2001 Honda Civic BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Honda Civic AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Honda Civic cars and light trucks from 1990+.
Disc Brakes -> Caliper Service -> Assemble -> Disassemble -> Front -> Overhaul -> Rear -> Replace
Vehicle: 2001 Honda Civic DX 1.7 L4 GAS
Front
Replace
Ensure dirt or other foreign matter is not allowed to contaminate brake fluid. Do not mix different types of brake fluid, as they might not be compatible.
- Refer to Figs. through when replacing calipers.
- Raise and support front of vehicle, then remove wheel and tire assemblies.
- Remove banjo bolt and disconnect brake hose from caliper.
- Remove caliper bolts, then the caliper.
- Reverse procedure to install.
Overhaul
Disassemble
- Refer toFigs. through when overhauling calipers.
- Remove caliper assembly from vehicle as outlined under " Brake Pad Service."
- Remove pad spring from calip...
CLICK HERE TO GET FULL ACCESS TO 2001 Honda Civic BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Honda Civic AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Honda Civic cars and light trucks from 1990+.
Power Brake Units -> Adjustments -> Pushrod Clearance -> Pushrod Length
Vehicle: 2001 Honda Civic GX 1.7 L4 CNG
Pushrod Clearance
Master cylinder pushrod-to-piston clearance must be checked and adjusted before installing master cylinder.
- Using pushrod adjustment gauge tool No. 07JAG-SD40100, or equivalent, adjust bolt so top of it is flush with end of master cylinder piston, Fig. .
- Install master cylinder rod seal between pushrod bolt adjustment gauge and brake booster.
- Without disturbing position of adjusting bolts, install gauge upside down on booster and torque nuts to 11 ft. lbs.
- Connect booster in line with a vacuum gauge, and maintain an engine speed that will deliver 20 inches of vacuum. Th...
CLICK HERE TO GET FULL ACCESS TO 2001 Honda Civic BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
