Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2001 Mazda 626 car and truck
repair procedures including Mazda engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2001 Mazda 626 automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2001 Mazda 626
- 2001 Mazda 626 2.5 V6 GAS, CC:2497, Fuel Injection
- 2001 Mazda 626 2.0 L4 GAS, CC:1991, Fuel Injection
A/C & HEATER SERVICE PROCEDURES FOR 2001 Mazda 626 AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 2001 Mazda 626 cars and light trucks from 1990+
Mazda -> Component Replacement & Adjustment -> Thermostat, Replace -> 2.5L Engine -> 3.0L & 4.0L Engines -> 626 -> B-Series -> Miata -> Millenia -> MPV -> Protege
Vehicle: 2001 Mazda 626 2.5 V6 GAS
B-Series
2.5L Engine
- Drain engine coolant into suitable container.
- Disconnect heater return hose, ECT sensor, temperature sending unit and upper radiator hose from thermostat housing outlet.
- Remove mounting bolt, elbow housing, thermostat and gasket.
- Reverse procedure to install noting the following:
- Position gasket on cover before installation of thermostat.
- Ensure thermostat is turned and locked into locking recess.
- Torque water temperature sending unit to 8-18 ft. lbs.
- Torque thermostat housing to 15...
CLICK HERE TO GET FULL ACCESS TO 2001 Mazda 626 A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 2001 Mazda 626 AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 2001 Mazda 626 cars and light trucks from 1990+
Mazda -> Automatic Temperature Control System Diagnosis & Testing -> Precautions -> Air Bag System Disarming & Arming -> Battery Ground Cable -> Radio Coded Anti-Theft System
Vehicle: 2001 Mazda 626 2.0 L4 GAS
Air Bag System Disarming & Arming
Refer to and for air bag system disarming and arming procedures.
Battery Ground Cable
Prior to service, disconnect battery ground cable and isolate as required...
CLICK HERE TO GET FULL ACCESS TO 2001 Mazda 626 A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 2001 Mazda 626 AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 2001 Mazda 626 cars and light trucks from 1990+
Imported Cars & Light Trucks & Vans -> 2001-02 -> Evacuating System -> Using Charging Station -> Using Vacuum Pump
Vehicle: 2001 Mazda 626 2.0 L4 GAS
Using Vacuum Pump
Vacuum pumps suitable for removing air and moisture from A/C systems are commercially available. A specification for system pump down used here is 28-291/2 inches vacuum. This reading can be attained at or near sea level only. For each 1000 feet of altitude this operation is performed, the reading will be 1 inch vacuum higher. For example, at 5000 feet elevation, only 23-241/2 inches of vacuum can be obtained. The system refrigerant must be completely recovered before it can be evacuated. Damage to the vacuum pump will result if pressurized ...
CLICK HERE TO GET FULL ACCESS TO 2001 Mazda 626 A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 2001 Mazda 626 AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 2001 Mazda 626 cars and light trucks from 1990+
Imported Cars & Light Trucks & Vans -> 2001-02 -> System Inspection -> Compressor -> Condenser -> Evaporator -> Receiver-Drier/Accumulator -> Refrigerant Line Restrictions -> Thermostatic Expansion Valve
Vehicle: 2001 Mazda 626 2.5 V6 GAS
While a detailed diagnostic procedure for all air conditioning systems would be impractical due to the many variations in construction and operation, there are three fundamental components of a total diagnosis:
- Refrigerant systems must have an adequate, but not excessive charge.
- Determination must be made whether the refrigerant system is governed by a cycling clutch compressor or by valves which control evaporator pressure.
- The air distribution system (blower motor, switches, vacuum lines and air ducts) must be operational before checking the ...
CLICK HERE TO GET FULL ACCESS TO 2001 Mazda 626 A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 2001 Mazda 626 AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 2001 Mazda 626 cars and light trucks from 1990+
Electrical Symbol & Wire Color Code Identification -> Wire Color Code Identification -> Imported Vehicles
Vehicle: 2001 Mazda 626 2.0 L4 GAS
CLICK HERE TO GET FULL ACCESS TO 2001 Mazda 626 A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 2001 Mazda 626 AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 2001 Mazda 626 cars and light trucks from 1990+
Air Bag System Precautions -> Mazda -> Disarming -> 1990-93 -> 1994-96 -> 1997-2001 -> 2002-04
Vehicle: 2001 Mazda 626 2.5 V6 GAS
NOTE: For B2300, B3000 And B4000, Refer To "Ranger" In "Ford Motor Co."
NOTE: For Tribute, Refer To "Escape" In "Ford Motor Co."
1990-93
- On 929 models, refer to "1994-96."
- On models equipped with audio anti-theft, obtain audio unit anti-theft code number from vehicle owner.
- On all models, disconnect battery ground cable.
- On Miata models, disconnect orange and blue air bag clockspring connectors, Fig. .
- On 626, MX-6 and RX-7 models, remove lower lefthand sound insulator from instrument panel, then disconnect clockspring orange and blue connectors, Figs...
CLICK HERE TO GET FULL ACCESS TO 2001 Mazda 626 A/C & HEATER SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
