Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2001 Mazda 626 car and truck
repair procedures including Mazda engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2001 Mazda 626 automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2001 Mazda 626
- 2001 Mazda 626 2.5 V6 GAS, CC:2497, Fuel Injection
- 2001 Mazda 626 2.0 L4 GAS, CC:1991, Fuel Injection
BRAKE SERVICE PROCEDURES FOR 2001 Mazda 626 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Mazda 626 cars and light trucks from 1990+.
Disc Brakes -> Caliper Service -> B-Series -> Front -> Miata -> Millenia -> MPV -> MX-6 & 626 -> Protege -> Rear -> Replacement -> Service -> Tribute
Vehicle: 2001 Mazda 626 2.5 V6 GAS
Front
B-Series
Replacement
- Raise and support vehicle and remove wheel.
- Remove brake line and plug to avoid fluid loss and air entering line.
- Remove caliper mounting bolts.
- Reverse procedure to install.
Service
- Remove excess dirt from caliper assembly, then remove and discard dust boot.
- Place a piece of wood in caliper and gently blow compressed air into brake line hole to help force out piston. Do not pry piston out, as you may damage assembly.
- Inspect piston for wear and corrosion. Replace as needed.
- Remove piston seal and discard.
- Remove and inspect bleeder screw. Replace as needed.
- Inspec...
CLICK HERE TO GET FULL ACCESS TO 2001 Mazda 626 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Mazda 626 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Mazda 626 cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> B-Series -> Except B-Series & Tribute -> Manual -> Pressure -> Tribute
Vehicle: 2001 Mazda 626 2.5 V6 GAS
Except B-Series & Tribute
- Raise and support vehicle with jack stands.
- Fill reservoir with brake fluid, ensure reservoir is at least half full at all times during bleeding procedure.
- After removing bleeder cap, connect one end of transparent vinyl tube to bleeder and place other end in a clean, clear container that is half full with brake fluid.
- One person should depress pedal a few times, then hold the pedal depressed.
- A second person should loosen the bleeder screw and drain fluid, then retighten screw to specifications.
- Repeat steps 4 and 5 until there are no more air bubbles see...
CLICK HERE TO GET FULL ACCESS TO 2001 Mazda 626 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Mazda 626 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Mazda 626 cars and light trucks from 1990+.
Drum Brakes -> Adjustments -> B-Series -> Except B-Series -> Parking Brake
Vehicle: 2001 Mazda 626 2.5 V6 GAS
Parking Brake
B-Series
The parking brake on these vehicles is self adjusting. Depress parking brake completely to the f...
CLICK HERE TO GET FULL ACCESS TO 2001 Mazda 626 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Mazda 626 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Mazda 626 cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> B-Series -> Except B-Series & Tribute -> Manual -> Pressure -> Tribute
Vehicle: 2001 Mazda 626 2.0 L4 GAS
Except B-Series & Tribute
- Raise and support vehicle with jack stands.
- Fill reservoir with brake fluid, ensure reservoir is at least half full at all times during bleeding procedure.
- After removing bleeder cap, connect one end of transparent vinyl tube to bleeder and place other end in a clean, clear container that is half full with brake fluid.
- One person should depress pedal a few times, then hold the pedal depressed.
- A second person should loosen the bleeder screw and drain fluid, then retighten screw to specifications.
- Repeat steps 4 and 5 until there are no more air bubbles see...
CLICK HERE TO GET FULL ACCESS TO 2001 Mazda 626 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Mazda 626 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Mazda 626 cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Replacement -> Except Tribute -> Master Cylinder -> Tribute
Vehicle: 2001 Mazda 626 2.5 V6 GAS
Master Cylinder
Except Tribute
- Disconnect brake fluid level sensor.
- Disconnect and cap brake fluid lines from master cylinder using Line Wrench tool No. 49-0259-770 A/B, or equivalent.
- Remove proportioning bypass valve attaching bolts and valve, if equipped.
- Remove bracket, if equipped, then the master cylinder assembly from the power brake booster.
- Reverse procedure to install, noting the following:
- On all models except B-Series, torque master cylinder nuts to 8-12 ft. lbs.
- On B-Series models, torque master cylinder nuts to 14-21 ft. lbs.
- On all models, bleed brake system.
Tribute
- D...
CLICK HERE TO GET FULL ACCESS TO 2001 Mazda 626 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Mazda 626 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Mazda 626 cars and light trucks from 1990+.
Power Brake Units -> Power Brake Unit Service -> Replacement
Vehicle: 2001 Mazda 626 2.5 V6 GAS
Replacement
- Remove master cylinder as outlined in "Hydraulic Brake Systems."
- Remove clutch pipe holder, if equipped, then disconnect vacuum hose from power brake unit.
- Disconnect pushrod fork from brake p...
CLICK HERE TO GET FULL ACCESS TO 2001 Mazda 626 BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2001 Mazda 626 vehicle.
|
| Access the Complete guide! |
