Auto Parts Search

BRAKE SERVICE PROCEDURES FOR 2001 Plymouth Neon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Plymouth Neon cars and light trucks from 1990+.
Hydraulic Brake Systems -> Adjustments -> Avenger & 1999-2000 Sebring Coupe -> Brake Booster Pushrod -> Stop Lamp Switch
Vehicle: 2001 Plymouth Neon 2.0 L4 GAS
Stop Lamp Switch
- Release stop lamp switch from bracket by rotating it 30° counterclockwise.
- Disconnect stop lamp switch wiring harness connector.
- Pull outward on stop lamp switch plunger until fully extended.
- Depress brake pedal, holding down in place.
- Install stop lamp switch onto bracket by aligning index key on switch with slot at top of square hole.
- Rotate switch 30° clockwise to lock switch into bracket, Fig. .
- Connect wiring harness connector to stop lamp switch.
- Pull back on brake pedal until pedal stops moving to allow switch plunger to ratchet to correct position.
Brake Booster Push...
CLICK HERE TO GET FULL ACCESS TO 2001 Plymouth Neon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Plymouth Neon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Plymouth Neon cars and light trucks from 1990+.
Disc Brakes -> Type 5 -> Brake System Bleed
Vehicle: 2001 Plymouth Neon 2.0 L4 GAS
Refer to "Hydraulic Brake S... "
CLICK HERE TO GET FULL ACCESS TO 2001 Plymouth Neon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Plymouth Neon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Plymouth Neon cars and light trucks from 1990+.
Drum Brakes -> Type 1 -> Precautions
Vehicle: 2001 Plymouth Neon 2.0 L4 GAS
When working on or around brake assemblies, care must be taken to prevent breathing asbestos dust. During routine service operations, the amount of asbestos dust from brake lining wear is at a low level because of a chemical breakdown during use. A few precautions will minimize exposure.
Do not sand or grind brake linings unless suitable exhaust ventilation equipment is used to prevent excessive asbestos exposure.
- Wear suitable respirator approved for asbestos dust us...
CLICK HERE TO GET FULL ACCESS TO 2001 Plymouth Neon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Plymouth Neon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Plymouth Neon cars and light trucks from 1990+.
Power Brake Units -> Description -> Operation -> System
Vehicle: 2001 Plymouth Neon 2.0 L4 GAS
System
These units are of the vacuum suspended type. Some units are of the single diaphragm type, while others are of the tandem diaphragm type, both single piston and double piston or split system type master cylinders are used.
The vacuum suspended diaphragm type units utilize engine manifold vacuum and atmospheric pressure for its power. It consists of three basic elements combined into a single power unit. The three basic elements of the single diaphragm type are:
- A vacuum power section which includes a front and rear shell, a power diaphragm, a return spring and a pushrod.
- A contro...
CLICK HERE TO GET FULL ACCESS TO 2001 Plymouth Neon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Plymouth Neon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Plymouth Neon cars and light trucks from 1990+.
Drum Brakes -> Type 1 -> Brake Service -> 1999 -> 2000-03 -> Breeze, Cirrus & 1999-2000 Stratus -> Installation -> Neon & 1999-2000 Sebring Convertible -> Removal
Vehicle: 2001 Plymouth Neon 2.0 L4 GAS
Breeze, Cirrus & 1999-2000 Stratus
Removal
- Raise and support vehicle.
- Remove rear wheel and tire assemblies.
- Remove brake support plate top rubber plug.
- Fully release rear brake adjuster by insert suitable screwdriver into hole and turn adjuster towards front of car until it stops.
- Remove brake drum.
- Remove mounting nuts, then the rear brake drum from hub and bearing.
- Remove actuator spring from automatic adjuster mechanism and trailing brake shoe, Fig. .
- Remove upper and lower return springs.
- Remove brake shoe retainer and pin from leading brake shoe.
- Remove leading brake shoe and adjuster ...
CLICK HERE TO GET FULL ACCESS TO 2001 Plymouth Neon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Plymouth Neon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Plymouth Neon cars and light trucks from 1990+.
Disc Brakes -> Type 5 -> Adjustments -> Parking Brake
Vehicle: 2001 Plymouth Neon 2.0 L4 GAS
Parking Brake
- Release parking brake.
- Raise and support vehicle.
- Adjust parking brake cable until there is slack in cable.
- Tighten adjusting nut until a sl...
CLICK HERE TO GET FULL ACCESS TO 2001 Plymouth Neon BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
![]() |
Access the Complete guide! |