Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2001 Suzuki Swift car and truck
repair procedures including Suzuki engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2001 Suzuki Swift automobile. Try the Automotix DIY solution today!
BRAKE SERVICE PROCEDURES FOR 2001 Suzuki Swift AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Suzuki Swift cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service -> Master Cylinder Overhaul
Vehicle: 2001 Suzuki Swift 1.3 L4 GAS
Master Cylinder Overhaul
- Remove master cylinder as outlined under "Master Cylinder, Replace."
- Remove circlip, then the primary piston.
- Remove pisto...
CLICK HERE TO GET FULL ACCESS TO 2001 Suzuki Swift BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Suzuki Swift AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Suzuki Swift cars and light trucks from 1990+.
Anti-lock Brakes -> Description
Vehicle: 2001 Suzuki Swift 1.3 L4 GAS
The ABS controls the fluid pressure applied to the wheel cylinder of each brake from the master cylinder so that each wheel is not locked even when hard braking...
CLICK HERE TO GET FULL ACCESS TO 2001 Suzuki Swift BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Suzuki Swift AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Suzuki Swift cars and light trucks from 1990+.
Disc Brakes -> Caliper Service -> Assemble -> Disassemble -> Installation -> Removal
Vehicle: 2001 Suzuki Swift 1.3 L4 GAS
Removal
- Remove approximately 2/3 of brake fluid from master cylinder.
- Raise and support vehicle.
- Mark relationship between front wheel and axle, then remove wheel and tire assembly.
- Remove inlet fitting attaching bolt, copper washer and inlet fitting from caliper housing. Plug opening in inlet fitting to prevent fluid loss and contamination. Do not crimp brake hose, as this may damage internal structure of hose. If only shoe and lining assemblies are to be replaced, do not disconnect brake line fitting from caliper.
- Remove caliper slide pins and caliper.
- Remove shoe and lining assembl...
CLICK HERE TO GET FULL ACCESS TO 2001 Suzuki Swift BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Suzuki Swift AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Suzuki Swift cars and light trucks from 1990+.
Hydraulic Brake Systems -> Adjustments -> Brake Pedal Height -> Brake Pedal Travel Inspection
Vehicle: 2001 Suzuki Swift 1.3 L4 GAS
Brake Pedal Height
The brake pedal should be at the same height as clutch pedal. Ensure distance between brake booster mounting surface (with gasket) and pushrod clevis pin hole is as follows:
- On Esteem and Swift models, 4.51-4.54 inches (114.5-115.5 mm).
- On Grand Vitara and Vitara models, 7.60-7.99 inches (193-203 mm) for 1999 and 8.19-8.58 inches (208-218) for 2000-02.
- On Sidekick and X-90 models, 6.60-6.64 inches (167.6-168.6 mm)
Brake Pedal Travel Inspection
- Start engine, then depress brake pedal a few times.
- Apply ap...
CLICK HERE TO GET FULL ACCESS TO 2001 Suzuki Swift BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Suzuki Swift AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Suzuki Swift cars and light trucks from 1990+.
Anti-lock Brakes -> Diagnosis & Testing -> 1999-2000 ESTEEM -> 2001-02 ESTEEM -> Accessing Diagnostic Trouble Codes -> Clearing Diagnostic Trouble Codes -> Diagnostic Tests -> Diagnostic Trouble Code Interpretation -> GRAND VITARA & VITARA w/TYPE 1 ABS -> GRAND VITARA & VITARA w/TYPE 2 ABS -> Less Scan Tool -> SIDEKICK & X90 w/1.6L ENGINE & SWIFT -> SIDEKICK, X90 & 1997-98 ESTEEM w/1.8L ENGINE -> Wiring Diagrams -> With Scan Tool
Vehicle: 2001 Suzuki Swift 1.3 L4 GAS
Accessing Diagnostic Trouble Codes
Less Scan Tool
- Using jumper wire connect diagnostic switch terminal of DIAG-2 connector to ground, Fig. .
- Connect positive probe of analog voltmeter to positive terminal of battery and negative probe to diagnostic output terminal of DIAG-2 connector.
- Turn ignition to On position.
- Read deflection of voltmeter indicator which represents diagnostic trouble codes, Fig. . When more than two diagnostic trouble codes are stored in memory, deflection for each code is repeated three times starting with the smallest code number in increasing order.
- After c...
CLICK HERE TO GET FULL ACCESS TO 2001 Suzuki Swift BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2001 Suzuki Swift AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2001 Suzuki Swift cars and light trucks from 1990+.
Disc Brakes -> Rotor Replacement
Vehicle: 2001 Suzuki Swift 1.3 L4 GAS
- Raise and support vehicle, then remove wheels.
- Remove caliper as outlined under "Caliper Service." During removal, be careful not to damage brake f...
CLICK HERE TO GET FULL ACCESS TO 2001 Suzuki Swift BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
