Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2002 Chevrolet Avalanche 2500 car and truck
repair procedures including Chevrolet engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2002 Chevrolet Avalanche 2500 automobile. Try the Automotix DIY solution today!
BRAKE SERVICE PROCEDURES FOR 2002 Chevrolet Avalanche 2500 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Chevrolet Avalanche 2500 cars and light trucks from 1990+.
Power Brake Units -> Delco Brake Booster -> Power Brake Unit Replacement -> Aztek & Rendezvous -> C & K Series -> Express & Savana -> Montana, Silhouette, Trans Sport & Venture -> S & T Series -> Vue
Vehicle: 2002 Chevrolet Avalanche 2500 8.1 V8 GAS
Aztek & Rendezvous
- Remove coolant reservoir, then relieve fuel system pressure as outlined under. "Precautions."
- Remove cruise control cable from module, then disconnect electrical connector from cruise control module.
- Remove cruise control module from bracket, then the front end sheet metal diagonal brace.
- Remove PCM cover from air cleaner housing, then the PCM and set aside.
- Remove air cleaner intake duct, then bolts from air cleaner assembly and housing.
- Remove fuel lines from pipes and vapor line, then disconnect fluid level sensor switch from brake master cylinder.
- Disc...
CLICK HERE TO GET FULL ACCESS TO 2002 Chevrolet Avalanche 2500 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 Chevrolet Avalanche 2500 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Chevrolet Avalanche 2500 cars and light trucks from 1990+.
Disc Brakes -> Delco Dual Piston Sliding Caliper -> Brake System Bleed
Vehicle: 2002 Chevrolet Avalanche 2500 8.1 V8 GAS
Refer to. "Hydraulic Brake... "
CLICK HERE TO GET FULL ACCESS TO 2002 Chevrolet Avalanche 2500 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 Chevrolet Avalanche 2500 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Chevrolet Avalanche 2500 cars and light trucks from 1990+.
Anti-Lock Brakes -> Kelsey-Hayes -> System Service -> Brake Pressure Modulator Valve (BPMV) -> Brake System Bleed -> Component Replacement -> Electronic Brake Control Module (EBCM) -> Front Wheel Speed Sensor -> Manual Bleed -> Pressure Bleed
Vehicle: 2002 Chevrolet Avalanche 2500 8.1 V8 GAS
Brake System Bleed
Gravity and vacuum bleeding procedures are not recommended for use with the anti-lock brake system. The manual bleed procedure is the preferred method, although pressure bleeding is also possible. Do not pump the brake pedal during the bleeding process, as fluid aeration may occur.
Manual Bleed
- Raise and support vehicle, then connect a clear plastic tube to brake bleed screw at righthand rear wheel.
- Place free end of tube in a glass jar partially filled with clean brake fluid. Ensure end of tube remains submerged in fluid and master cylinder reservoir is kept full.
- ...
CLICK HERE TO GET FULL ACCESS TO 2002 Chevrolet Avalanche 2500 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 Chevrolet Avalanche 2500 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Chevrolet Avalanche 2500 cars and light trucks from 1990+.
Disc Brakes -> Delco Dual Piston Sliding Caliper -> Caliper Service -> Assemble -> Disassemble -> Inspection -> Installation -> Removal
Vehicle: 2002 Chevrolet Avalanche 2500 8.1 V8 GAS
Removal
- Siphon 2/3 of the brake fluid from master cylinder.
- Raise and support vehicle.
- Remove tire and wheel assembly.
- Compress caliper pistons until they bottom in bores using suitable clamp,. Fig. .
- Disconnect brake hose at caliper by removing inlet fitting bolt.
- Remove mounting bolts and caliper.
Inspection
Should it become required to remove the caliper for installation of new components, clean components in denatured alcohol, wipe dry using lint-free cloths. Blow out drilled passages and holes using compressed air. Inspect dust boots for punctures or tears. If punctures or tears ar...
CLICK HERE TO GET FULL ACCESS TO 2002 Chevrolet Avalanche 2500 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 Chevrolet Avalanche 2500 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Chevrolet Avalanche 2500 cars and light trucks from 1990+.
Hydraulic Brake Systems -> Brake System Bleed -> Hydraulic System Flush -> Manual Bleed -> Master Cylinder Bleed -> Parking Brake Bleed -> Pressure Bleed
Vehicle: 2002 Chevrolet Avalanche 2500 8.1 V8 GAS
Manual Bleed
- If vehicle is equipped with power brakes, remove vacuum reserve by applying brakes several times with engine off.
- Fill master cylinder reservoirs with suitable brake fluid.. Ensure to always keep master cylinder reservoirs at least half full during entire bleeding procedure.
- If master cylinder is suspected to have air in the bore, it must be bled first. To bleed master cylinder, proceed as follows:
- Disconnect forward brake pipe connection at master cylinder.
- Allow brake fluid to fill master cylinder bore until it begins to flow from forward pipe connector port.
- Connect...
CLICK HERE TO GET FULL ACCESS TO 2002 Chevrolet Avalanche 2500 BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 Chevrolet Avalanche 2500 AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Chevrolet Avalanche 2500 cars and light trucks from 1990+.
Power Brake Units -> Delco Brake Booster -> Troubleshooting -> Brakes Grab -> Hard Pedal -> Slow Or No Release
Vehicle: 2002 Chevrolet Avalanche 2500 8.1 V8 GAS
Hard Pedal
- Internal vacuum leak.
- Faulty control valve.
- Broken or damaged hydraulic brake lines.
- Collapsed or damaged vacuum hose.
- Plugged or loose vacuum fitting.
- Bad stud welds on front or rear housing on power head.
- Faulty booster diaphragm.
- Restricted air filter element.
- Worn or distorted reaction plate or levers.
- Cracked or broken pow...
CLICK HERE TO GET FULL ACCESS TO 2002 Chevrolet Avalanche 2500 BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
