Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2002 Chrysler Sebring car and truck
repair procedures including Chrysler engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2002 Chrysler Sebring automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2002 Chrysler Sebring
- 2002 Chrysler Sebring 2.4 L4 GAS, CC:2351, Fuel Injection, Engine VIN:, Desg:G
- 2002 Chrysler Sebring 3.0 V6 GAS, CC:2972, CID:181, Fuel Injection, Aspiration:181, Engine VIN:, Desg:H
- 2002 Chrysler Sebring 2.4 L4 GAS, CC:2429, CID:148, Fuel Injection, Aspiration:148, Engine VIN:, Desg:X
- 2002 Chrysler Sebring 2.7 V6 GAS, CC:2700, CID:167, Fuel Injection, Aspiration:167, Engine VIN:, Desg:R
BRAKE SERVICE PROCEDURES FOR 2002 Chrysler Sebring AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Chrysler Sebring cars and light trucks from 1990+.
Anti-lock Brakes -> Teves Anti-Lock Braking System -> System Service -> 1999 -> 1999 Neon -> 1999-2000 -> 1999-2000 Sebring Convertible & Stratus -> 2000-03 -> 2000-03 Neon -> 2001-03 -> 2001-03 Sebring Convertible, Sebring Sedan & Stratus Sedan -> Brake System Bleed -> Breeze & Cirrus -> Component Replacement -> Concorde, Intrepid, LHS & 300M -> Controller Anti-Lock Brake (CAB) -> Front -> Integrated Control Unit (ICU) -> Neon -> Rear -> Sebring Convertible, Sebring Sedan & Stratus Sedan -> Wheel Speed Sensor
Vehicle: 2002 Chrysler Sebring 2.4 L4 GAS
Brake System Bleed
The TEVES Mark 20e anti-lock brake system must be bled as two independent braking systems. The non-ABS portion of the brake system should be bled the same as any non-ABS system. The ABS portion of the system requires the use of a DRB, or equivalently programmed scan tool.
- To bleed non-ABS portion of system, refer to "Hydraulic Brakes."
- To bleed the ABS portion of the system, connect DRB scan tool to vehicle diagnostics connector, located under the lefthand side of instrument panel.
- Set can tool to Bleed ABS routine.
- Apply brake pedal firmly and initiate Bleed ABS cycl...
CLICK HERE TO GET FULL ACCESS TO 2002 Chrysler Sebring BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 Chrysler Sebring AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Chrysler Sebring cars and light trucks from 1990+.
Hydraulic Brake Systems -> Adjustments -> Avenger & 1999-2000 Sebring Coupe -> Brake Booster Pushrod -> Stop Lamp Switch
Vehicle: 2002 Chrysler Sebring 2.4 L4 GAS
Stop Lamp Switch
- Release stop lamp switch from bracket by rotating it 30° counterclockwise.
- Disconnect stop lamp switch wiring harness connector.
- Pull outward on stop lamp switch plunger until fully extended.
- Depress brake pedal, holding down in place.
- Install stop lamp switch onto bracket by aligning index key on switch with slot at top of square hole.
- Rotate switch 30° clockwise to lock switch into bracket, Fig. .
- Connect wiring harness connector to stop lamp switch.
- Pull back on brake pedal until pedal stops moving to allow switch plunger to ratchet to correct position.
Brake Booster Push...
CLICK HERE TO GET FULL ACCESS TO 2002 Chrysler Sebring BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 Chrysler Sebring AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Chrysler Sebring cars and light trucks from 1990+.
Anti-lock Brakes -> Teves Anti-Lock Braking System -> Description
Vehicle: 2002 Chrysler Sebring 2.7 V6 GAS
The Teves Mark 20e Anti-Lock Braking System (ABS) prevents the wheels from locking up during hard braking, regardless of the surface conditions. This allows the car to stop in a shorter distance, and allows the driver to maintain directional control of the vehic...
CLICK HERE TO GET FULL ACCESS TO 2002 Chrysler Sebring BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 Chrysler Sebring AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Chrysler Sebring cars and light trucks from 1990+.
Power Brake Units -> General Service -> Brake Booster Operation Test -> Check Valve Operation Test
Vehicle: 2002 Chrysler Sebring 2.7 V6 GAS
In order to properly service and repair available brake systems, a thorough understanding of the power assist systems is necessary. The vacuum assist diaphragm assembly multiplies the force exerted on the master cylinder piston in order to increase the hydraulic pressure delivered to the wheel cylinders or calipers while decreasing the effort necessary to obtain acceptable stopping performance.
Vacuum assist units get their energy by opposing engine vacuum to atmospheric pressure. A piston, cylinder and flexible diaphragm utilize this energy to provide brake assistance. The diaph...
CLICK HERE TO GET FULL ACCESS TO 2002 Chrysler Sebring BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 Chrysler Sebring AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Chrysler Sebring cars and light trucks from 1990+.
Hydraulic Brake Systems -> Tightening Specifications
Vehicle: 2002 Chrysler Sebring 2.4 L4 GAS
CLICK HERE TO GET FULL ACCESS TO 2002 Chrysler Sebring BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 Chrysler Sebring AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 Chrysler Sebring cars and light trucks from 1990+.
Power Brake Units -> Description -> Operation -> System
Vehicle: 2002 Chrysler Sebring 3.0 V6 GAS
System
These units are of the vacuum suspended type. Some units are of the single diaphragm type, while others are of the tandem diaphragm type, both single piston and double piston or split system type master cylinders are used.
The vacuum suspended diaphragm type units utilize engine manifold vacuum and atmospheric pressure for its power. It consists of three basic elements combined into a single power unit. The three basic elements of the single diaphragm type are:
- A vacuum power section which includes a front and rear shell, a power diaphragm, a return spring and a pushrod.
- A contro...
CLICK HERE TO GET FULL ACCESS TO 2002 Chrysler Sebring BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
