Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2002 Chrysler Sebring car and truck
repair procedures including Chrysler engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2002 Chrysler Sebring automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2002 Chrysler Sebring
- 2002 Chrysler Sebring 2.4 L4 GAS, CC:2351, Fuel Injection, Engine VIN:, Desg:G
- 2002 Chrysler Sebring 3.0 V6 GAS, CC:2972, CID:181, Fuel Injection, Aspiration:181, Engine VIN:, Desg:H
- 2002 Chrysler Sebring 2.4 L4 GAS, CC:2429, CID:148, Fuel Injection, Aspiration:148, Engine VIN:, Desg:X
- 2002 Chrysler Sebring 2.7 V6 GAS, CC:2700, CID:167, Fuel Injection, Aspiration:167, Engine VIN:, Desg:R
MAINTENANCE LAMP RESET PROCEDURES FOR 2002 Chrysler Sebring AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2002 Chrysler Sebring cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Cars -> Air Bag Warning Lamp ->
Vehicle: 2002 Chrysler Sebring 2.4 L4 GAS
This lamp should light for a approximately 6-8 seconds when the ignition is turned On as a bulb check. If the Air B...
CLICK HERE TO GET FULL ACCESS TO 2002 Chrysler Sebring MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2002 Chrysler Sebring AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2002 Chrysler Sebring cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Cars -> Compass & Temperature Mini Trip Computer -> Sebring Convertible & Sedan & Stratus Sedan -> Compass Calibration -> Variance Setting
Vehicle: 2002 Chrysler Sebring 2.7 V6 GAS
Compass Calibration
If the CAL indicator lights, the compass will need to be calibrated. This should be done on a level surface free of large metal objects such as other vehicles, bridges, buildings, railroads and underground cables. Proceed as follows:
- Set the mini trip computer to Compass/Temp mode using STEP Button, Fig. .
- Press the US/M and STEP buttons simultaneously until CAL is displayed.
- Drive the vehicle in two complete circles.
- When the CAL indicator turns Off, compass has been calibrated and should now display proper headings.
- Inspect for...
CLICK HERE TO GET FULL ACCESS TO 2002 Chrysler Sebring MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2002 Chrysler Sebring AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2002 Chrysler Sebring cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Cars -> Check Engine Lamp -> Breeze, Cirrus, Crossfire, Neon, Prowler, Sebring Convertible, Sebring Sedan, Stratus Sedan, 300M
Vehicle: 2002 Chrysler Sebring 2.4 L4 GAS
The Powertrain Control Module (PCM) monitors a variety of sensors and systems. Each time the ignition is turned On, the instrument panel Malfunction Indicator Lamp (MIL) should light for approximately 2 seconds and then go out. If the PCM senses a fault condition with a monitored circuit or if the PCM enters Limp-In mode, a Dia...
CLICK HERE TO GET FULL ACCESS TO 2002 Chrysler Sebring MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2002 Chrysler Sebring AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2002 Chrysler Sebring cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Cars -> Check Engine Lamp -> Avenger Coupe, Colt, Laser, Sebring Coupe, Stealth, Stratus Coupe, Summit & Talon
Vehicle: 2002 Chrysler Sebring 2.4 L4 GAS
When the ignition is turned On, the lamp will light for 2-3 seconds as a bulb inspection. If the lamp remains on, a fault in a PCM monitored system is indicated. After servicing the indicated component, the Malfunction Indicator Lamp can be reset by clearing the PCM memory. The PCM memo...
CLICK HERE TO GET FULL ACCESS TO 2002 Chrysler Sebring MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2002 Chrysler Sebring AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2002 Chrysler Sebring cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Cars -> Anti-Lock Brake System (ABS) Warning Lamp -> Breeze, Cirrus, Concord, Intrepid, LHS, Neon, New Yorker, Prowler, Sebring Convertible, Sebring Sedan, Stratus Sedan, Viper, Vision & 300M
Vehicle: 2002 Chrysler Sebring 2.4 L4 GAS
This lamp should light when the ignition is turned On. The lamp may light for as long as 30 seconds as a bulb and system inspection. If the lamp remains lit or lights while operating the vehicle, a fault condition in the anti-lock brake system is indicated. When the lamp is lit, turn ignition Off, then start the engine again. If the lamp still remains lit, the a...
CLICK HERE TO GET FULL ACCESS TO 2002 Chrysler Sebring MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2002 Chrysler Sebring AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2002 Chrysler Sebring cars and light trucks sold in the U.S. from 1990+.
Chrysler LLC Cars -> Anti-Lock Brake System (ABS) Warning Lamp -> Avenger Coupe, Talon, Sebring Coupe & Stratus Coupe
Vehicle: 2002 Chrysler Sebring 3.0 V6 GAS
This lamp should light for a few seconds when the ignition is turned On as a bulb and system inspection. If the lamp remains lit or lights while operating the vehicle, a fault condition in the anti-lock brake system is indicated. When the lamp is lit, turn ignition Off, then start the engine again. If the lamp still remains lit, the anti-lock brake system should be serviced. The brake system will remain functional, but without the anti-lock function. After servicing the anti-lock brake system, the lamp can be reset by connecting a suitable sca...
CLICK HERE TO GET FULL ACCESS TO 2002 Chrysler Sebring MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2002 Chrysler Sebring vehicle.
|
| Access the Complete guide! |
