Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2002 GMC Yukon car and truck
repair procedures including GMC engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2002 GMC Yukon automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2002 GMC Yukon
- 2002 GMC Yukon 4.8 V8 GAS, CID:294, Fuel Injection, Aspiration:294, Engine VIN:, Desg:V
- 2002 GMC Yukon 5.3 V8 GAS, CID:323, Fuel Injection, Aspiration:323, Engine VIN:, Desg:T
- 2002 GMC Yukon 5.3 V8 FLEX, CID:323, Fuel Injection, Aspiration:323, Engine VIN:, Desg:Z
- 2002 GMC Yukon Denali 6.0 V8 GAS, CID:364, Fuel Injection, Aspiration:364, Engine VIN:, Desg:U
- 2002 GMC Yukon Denali XL 6.0 V8 GAS, CID:364, Fuel Injection, Aspiration:364, Engine VIN:, Desg:U
BRAKE SERVICE PROCEDURES FOR 2002 GMC Yukon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 GMC Yukon cars and light trucks from 1990+.
Anti-Lock Brakes -> Kelsey-Hayes -> Description
Vehicle: 2002 GMC Yukon 5.3 V8 GAS
When wheel slip is detected during a brake application, the ABS enters anti-lock mode. During anti-lock braking, hydraulic pressure in the individual wheel circuits is controlled to prevent any wheel from slipping. A separate hydraulic line and specific solenoid valves are provided for each wheel. The ABS can decrease, hold, or increase hydraulic pressure to each wheel brake. The ABS cannot, however, increase hydraulic pressure above the amount which is transmitted by the master cylinder during braking.
During anti-lock braking, a series of rapid pulsations is felt in the brake pedal...
CLICK HERE TO GET FULL ACCESS TO 2002 GMC Yukon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 GMC Yukon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 GMC Yukon cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service -> Assemble -> Bendix Master Cylinder -> Delco Master Cylinder -> Disassemble -> Tracker Master Cylinder -> Wheel Cylinder
Vehicle: 2002 GMC Yukon 4.8 V8 GAS
Delco Master Cylinder
When performing the following procedures, refer to. Figs. and , noting that the composite reservoir may vary in design.
Disassemble
- Remove master cylinder from vehicle.
- Remove reservoir cover and diaphragm. Discard old brake fluid in reservoir.
- Inspect cover and diaphragm. Replace if cut, cracked or deformed.
- Remove fluid level switch and proportioning valve assembly, if equipped.
- Depress primary piston and remove lock ring.
- Plug primary fluid outlet (outlet nearest to cowl when master cylinder is installed), then apply compressed air into secondary fluid outlet...
CLICK HERE TO GET FULL ACCESS TO 2002 GMC Yukon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 GMC Yukon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 GMC Yukon cars and light trucks from 1990+.
Disc Brakes -> Delco Dual Piston Sliding Caliper -> Brake Pad Service
Vehicle: 2002 GMC Yukon 5.3 V8 GAS
The procedures to remove and install the brake pads are outlined in. "Calip... "
CLICK HERE TO GET FULL ACCESS TO 2002 GMC Yukon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 GMC Yukon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 GMC Yukon cars and light trucks from 1990+.
Power Brake Units -> Delco Brake Booster -> Troubleshooting -> Brakes Grab -> Hard Pedal -> Slow Or No Release
Vehicle: 2002 GMC Yukon 4.8 V8 GAS
Hard Pedal
- Internal vacuum leak.
- Faulty control valve.
- Broken or damaged hydraulic brake lines.
- Collapsed or damaged vacuum hose.
- Plugged or loose vacuum fitting.
- Bad stud welds on front or rear housing on power head.
- Faulty booster diaphragm.
- Restricted air filter element.
- Worn or distorted reaction plate or levers.
- Cracked or broken pow...
CLICK HERE TO GET FULL ACCESS TO 2002 GMC Yukon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 GMC Yukon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 GMC Yukon cars and light trucks from 1990+.
Power Brake Units -> Delco Brake Booster -> General Service
Vehicle: 2002 GMC Yukon 4.8 V8 GAS
Certain general service procedures apply, regardless of whether the brakes are vacuum or hydraulically assisted. Only top quality, clean brake fluid should be used. More seals and valves are used with power brake systems than with ordinary brakes, so an inferior brake fluid will do much more damage. For the same reason, ensure all dirt is kept out of the system. Additionally, on models with hydraulic assist brakes, care must be taken not to mix the fluids of the booster hydraulic system and brake hydraulic system as the fluids are not compatible.
If the power unit fails, the brak...
CLICK HERE TO GET FULL ACCESS TO 2002 GMC Yukon BRAKE SERVICE PROCEDURES
BRAKE SERVICE PROCEDURES FOR 2002 GMC Yukon AUTOMOBILES
Includes anti-lock brakes, disc, drum, power and hydraulic brake services diagnostics and procedures for domestic and imported 2002 GMC Yukon cars and light trucks from 1990+.
Hydraulic Brake Systems -> Component Service -> Assemble -> Bendix Master Cylinder -> Delco Master Cylinder -> Disassemble -> Tracker Master Cylinder -> Wheel Cylinder
Vehicle: 2002 GMC Yukon 5.3 V8 FLEX
Delco Master Cylinder
When performing the following procedures, refer to. Figs. and , noting that the composite reservoir may vary in design.
Disassemble
- Remove master cylinder from vehicle.
- Remove reservoir cover and diaphragm. Discard old brake fluid in reservoir.
- Inspect cover and diaphragm. Replace if cut, cracked or deformed.
- Remove fluid level switch and proportioning valve assembly, if equipped.
- Depress primary piston and remove lock ring.
- Plug primary fluid outlet (outlet nearest to cowl when master cylinder is installed), then apply compressed air into secondary fluid outlet...
CLICK HERE TO GET FULL ACCESS TO 2002 GMC Yukon BRAKE SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
