Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2002 Jaguar XJR car and truck
repair procedures including Jaguar engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2002 Jaguar XJR automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2002 Jaguar XJR
- 2002 Jaguar XJR 4.0 V8 GAS, CC:3996, CID:244, Fuel Injection, Aspiration:244, Engine VIN:, Desg:B
- 2002 Jaguar XJR 100 4.0 V8 GAS, CC:3996, CID:244, Fuel Injection, Aspiration:244, Engine VIN:, Desg:B
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2002 Jaguar XJR AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2002 Jaguar XJR cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 2002 Jaguar XJR 4.0 V8 GAS
- Raise and support vehicle.
- Remove exhaust system.
- Remove exhaust support bracket.
- Remove driveshaft heat shield.
- Mark position of driveshaft in relation to transmission flange.
- Mark position of each nut and bolt in relation to transmission flexible joint.
- Detach the driveshaft from the transmission flange. Under no circumstances must the flexible coupling (or its fixings) be loosened or removed from the driveshaft.
- Mark position of driveshaft in relation to rear drive axle flange.
- Mark position of balance nut in relation to rear drive axle flange (if equipped).
- Mark position of each ...
CLICK HERE TO GET FULL ACCESS TO 2002 Jaguar XJR DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2002 Jaguar XJR AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2002 Jaguar XJR cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Install -> Remove
Vehicle: 2002 Jaguar XJR 4.0 V8 GAS
Remove
- Loosen axle shaft nut at hub.
- Raise and support vehicle.
- Remove wheel and tire assembly.
- Remove brake disc.
- Detach Anti-Lock Brake System (ABS) sensor.
- Detach outer tie rod.
- Detach lower control arm from wheel knuckle.
- Remove axle shaft hub nut.
- Detach halfshaft from knuckle assembly, using hub puller tool No. 205-491, hub puller adapter tool No. 205-491-01 and flange remover forcing screw tool No. 204-269 or equivalents.
- Remove wheel knuckle assembly.
- Remove halfshaft, using halfshaft splitter handle tool No. 307-442 and halfshaft splitter tool No. 307-443. To avoid damage t...
CLICK HERE TO GET FULL ACCESS TO 2002 Jaguar XJR DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2002 Jaguar XJR AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2002 Jaguar XJR cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Install -> Remove
Vehicle: 2002 Jaguar XJR 100 4.0 V8 GAS
Remove
- Loosen axle shaft nut at hub.
- Raise and support vehicle.
- Remove wheel and tire assembly.
- Remove brake disc.
- Detach Anti-Lock Brake System (ABS) sensor.
- Detach outer tie rod.
- Detach lower control arm from wheel knuckle.
- Remove axle shaft hub nut.
- Detach halfshaft from knuckle assembly, using hub puller tool No. 205-491, hub puller adapter tool No. 205-491-01 and flange remover forcing screw tool No. 204-269 or equivalents.
- Remove wheel knuckle assembly.
- Remove halfshaft, using halfshaft splitter handle tool No. 307-442 and halfshaft splitter tool No. 307-443. To avoid damage t...
CLICK HERE TO GET FULL ACCESS TO 2002 Jaguar XJR DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2002 Jaguar XJR AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2002 Jaguar XJR cars and light trucks from 1990+.
DRIVESHAFT, Replace
Vehicle: 2002 Jaguar XJR 100 4.0 V8 GAS
- Raise and support vehicle.
- Remove exhaust system.
- Remove exhaust support bracket.
- Remove driveshaft heat shield.
- Mark position of driveshaft in relation to transmission flange.
- Mark position of each nut and bolt in relation to transmission flexible joint.
- Detach the driveshaft from the transmission flange. Under no circumstances must the flexible coupling (or its fixings) be loosened or removed from the driveshaft.
- Mark position of driveshaft in relation to rear drive axle flange.
- Mark position of balance nut in relation to rear drive axle flange (if equipped).
- Mark position of each ...
CLICK HERE TO GET FULL ACCESS TO 2002 Jaguar XJR DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2002 Jaguar XJR vehicle.
|
| Access the Complete guide! |
