Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2002 Nissan Maxima car and truck
repair procedures including Nissan engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2002 Nissan Maxima automobile. Try the Automotix DIY solution today!
MAINTENANCE LAMP RESET PROCEDURES FOR 2002 Nissan Maxima AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2002 Nissan Maxima cars and light trucks sold in the U.S. from 1990+.
Nissan -> Vehicle Dynamic Control (VDC) Warning Lamp ->
Vehicle: 2002 Nissan Maxima 3.5 V6 GAS
The VDC lamp should illuminate when the ignition switch is placed in the on position for a few seconds or when the VDC control switch is in the off position. If the VDC lamps illuminates while ope...
CLICK HERE TO GET FULL ACCESS TO 2002 Nissan Maxima MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2002 Nissan Maxima AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2002 Nissan Maxima cars and light trucks sold in the U.S. from 1990+.
Nissan -> Anti-Lock Warning Lamp -> 1995-2002 Maxima
Vehicle: 2002 Nissan Maxima 3.5 V6 GAS
This lamp will be illuminated when the ignition switch is placed in the on position as a bulb check. If the lamp remains lit or lights during vehicle operation, a problem in the anti-lock brake/traction control system is indicated. When the lamp is lit, place the ignition switch in the off position, then restart the engine. If the lamp remains lit, the system must be serviced. The basic brake system will remain functional. After servicing the system, proceed as follows:
- On 1995-99 models, locate the DLC located behind instrument panel fuse panel cover.
- On 2000-02 models, locate t...
CLICK HERE TO GET FULL ACCESS TO 2002 Nissan Maxima MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2002 Nissan Maxima AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2002 Nissan Maxima cars and light trucks sold in the U.S. from 1990+.
Nissan -> Automatic Transmission (AT) Check Engine Lamp ->
Vehicle: 2002 Nissan Maxima 3.5 V6 GAS
The Automatic Transmission (AT) Check lamp will be illuminated for approximately 2 seconds when the ignition switch is placed in the on position as a bulb check and then go Off. If it remains lit or comes on at any other time, a malfunction in the a...
CLICK HERE TO GET FULL ACCESS TO 2002 Nissan Maxima MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2002 Nissan Maxima AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2002 Nissan Maxima cars and light trucks sold in the U.S. from 1990+.
Nissan -> Maintenance Messages -> Maxima
Vehicle: 2002 Nissan Maxima 3.5 V6 GAS
The Vehicle Information Display will display a maintenance notification when engine oil, oil filter and tire rotation are due. To reset maintenance message proceed as follows:
- Pushing the MAINT ...
CLICK HERE TO GET FULL ACCESS TO 2002 Nissan Maxima MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2002 Nissan Maxima AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2002 Nissan Maxima cars and light trucks sold in the U.S. from 1990+.
Nissan -> Traction Control/Slip Indicator Lamp ->
Vehicle: 2002 Nissan Maxima 3.5 V6 GAS
Drive wheel slippage is detected by the four wheel rotating signal. When wheel slip becomes excessive, the Traction Control System (TCS) operates causing the SLIP indicator lamp to illuminate. When the TCS off switch is used to cancel TCS function, the ...
CLICK HERE TO GET FULL ACCESS TO 2002 Nissan Maxima MAINTENANCE LAMP RESET PROCEDURES
MAINTENANCE LAMP RESET PROCEDURES FOR 2002 Nissan Maxima AUTOMOBILES
Maintenance lamp reset procedures with corresponding images for most domestic and imported 2002 Nissan Maxima cars and light trucks sold in the U.S. from 1990+.
Nissan -> Malfunction Indicator Lamp (MIL) -> 2001-06
Vehicle: 2002 Nissan Maxima 3.5 V6 GAS
The MIL will illuminate to indicate that a system fault has been detected. The MIL will blink simultaneously with the red Light Emitting Diode (LED) on the Electronic Control Module (ECM). Following diagnosis and repair of all system faults, reset the MIL lamp. The DTCs can be cleared by placing the ignition switch in the off position. After approximately 10 seconds, place ignition switch in the on position engine not running. Depress the accelerator pedal to change from Mode II to Mode I. Place ignition switch in off position....
CLICK HERE TO GET FULL ACCESS TO 2002 Nissan Maxima MAINTENANCE LAMP RESET PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
| Get the Complete Technical Service Bulletins! |
 Access diagrams and repair information such as wiring diagrams,
diagnosis and repair charts, manufacturer
service bulletins, and OEM Part
numbers of your 2002 Nissan Maxima vehicle.
|
| Access the Complete guide! |
