Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2002 Saturn L Series car and truck
repair procedures including Saturn engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2002 Saturn L Series automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2002 Saturn L Series
- 2002 Saturn L Series 3.0 V6 GAS, CC:3000, CID:181, Fuel Injection, Aspiration:181
- 2002 Saturn L Series 2.2 L4 GAS, CC:2198, CID:134, Fuel Injection, Aspiration:134, Engine VIN:, Desg:F
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2002 Saturn L Series AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2002 Saturn L Series cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2002 Saturn L Series 3.0 V6 GAS
- With vehicle on ground, depress brake pedal and remove cotter and drive axle nut. Discard nut and cotter.
- Raise vehicle and support vehicle.
- Remove wheel and tire assembly corresponding to drive axle being removed.
- Remove tie rod end torque prevailing nut, discard nut. Do not attempt to separate joint using a wedge-type tool because seal may be damaged.
- Using a suitable puller, separate tie rod end from steering knuckle.
- Remove lower control arm to steering knuckle nut and bolt. Be careful not to allow steering knuckle to contact ball stud seal. Contact may cause seal to rip, ...
CLICK HERE TO GET FULL ACCESS TO 2002 Saturn L Series DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2002 Saturn L Series AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2002 Saturn L Series cars and light trucks from 1990+.
CV AXLE SHAFT, Replace
Vehicle: 2002 Saturn L Series 2.2 L4 GAS
- With vehicle on ground, depress brake pedal and remove cotter and drive axle nut. Discard nut and cotter.
- Raise vehicle and support vehicle.
- Remove wheel and tire assembly corresponding to drive axle being removed.
- Remove tie rod end torque prevailing nut, discard nut. Do not attempt to separate joint using a wedge-type tool because seal may be damaged.
- Using a suitable puller, separate tie rod end from steering knuckle.
- Remove lower control arm to steering knuckle nut and bolt. Be careful not to allow steering knuckle to contact ball stud seal. Contact may cause seal to rip, ...
CLICK HERE TO GET FULL ACCESS TO 2002 Saturn L Series DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |



