Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2002 Toyota Camry car and truck
repair procedures including Toyota engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2002 Toyota Camry automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2002 Toyota Camry
- 2002 Toyota Camry 3.0 V6 GAS, CC:2995, Fuel Injection
- 2002 Toyota Camry 2.4 L4 GAS, CC:2362, Fuel Injection
A/C & HEATER SERVICE PROCEDURES FOR 2002 Toyota Camry AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 2002 Toyota Camry cars and light trucks from 1990+
Toyota -> Component Replacement & Adjustment -> Compressor, Replace -> Avalon, Camry & Camry Solara -> Celica -> Corolla & Echo -> Highlander -> Installation -> Land Cruiser -> MR2 -> RAV4, Sequoia & Tundra -> Removal -> Sienna -> Tacoma & 4Runner
Vehicle: 2002 Toyota Camry 3.0 V6 GAS
Avalon, Camry & Camry Solara
- Operate engine at idle with A/C on for at least ten minutes.
- Turn ignition Off.
- Recover refrigerant as outlined under .
- Mark running direction, then remove compressor drive belt.
- Remove battery and bracket if required.
- Disconnect refrigerant lines at compressor, then cap all openings. Discard O-rings.
- Disconnect alternator electrical connectors.
- Remove alternator mounting bolts, then the alternator.
- Disconnect compressor clutch lead wire from wiring harness.
- Remove compressor mounting nut...
CLICK HERE TO GET FULL ACCESS TO 2002 Toyota Camry A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 2002 Toyota Camry AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 2002 Toyota Camry cars and light trucks from 1990+
Import Compressor Service -> Zexel Compressor -> Compressor Seal, Replace
Vehicle: 2002 Toyota Camry 3.0 V6 GAS
- Remove magnetic clutch assembly as described under "Compressor Clutch, Replace."
- Drain compressor oil, then using shaft seal remover tool No. J-33942, or equivalent, remove shaft seal cover.
- Remove bolt with gasket, then the front cylinder head by alternately tapping cylinder head projections with a plastic hammer. ...
CLICK HERE TO GET FULL ACCESS TO 2002 Toyota Camry A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 2002 Toyota Camry AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 2002 Toyota Camry cars and light trucks from 1990+
Import Compressor Service -> Nippondenso Compressor -> Compressor Clutch, Replace
Vehicle: 2002 Toyota Camry 3.0 V6 GAS
- Remove shaft nut or bolt, Fig. , with aid of spanner wrench.
- Remove pressure plate using pressure plate remover.
- Remove shims from shaft.
- Remove rotor (pulley) retaining snap ring using suitable snap ring pliers.
- Remove rotor (pulley) by gently tapping it with plastic hammer. Some compressors may require a jaw puller.
- Disconnect stator lead wires from compressor housing.
- Remove stator retaining snap ring using suitable snap ring pliers, then remove stator from compressor housing.
- On all models except 10PA15 &...
CLICK HERE TO GET FULL ACCESS TO 2002 Toyota Camry A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 2002 Toyota Camry AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 2002 Toyota Camry cars and light trucks from 1990+
Imported Cars & Light Trucks & Vans -> 2001-02 -> Oil Charge -> 3.5 RL -> 4Runner -> 626 -> Accent -> Accord -> Acura -> Amigo, Rodeo & Trooper -> Audi -> Avalon -> B-Series Pickup & Tribute -> BMW -> Cabrio, Golf, GTI & Jetta -> Camry & Camry Solara -> Celica & Echo -> Civic & CR-V -> CL -> Corolla -> Daewoo -> Diamante -> Eclipse -> Elantra & Tiburon -> ES300 -> Eurovan -> Forester & Legacy -> Galant -> GS300 & GS430 -> Hombre -> Honda -> Hyundai -> Impreza -> Infiniti -> Integra -> IS300, LS430, RX300 & SC430 -> Isuzu -> Jaguar -> Kia -> Land Cruiser -> Land Rover -> Lexus -> LX470 -> Mazda -> MDX -> Mercedes Benz -> Miata -> Millenia -> Mirage & Lancer -> Mitsubishi -> Montero -> Montero Sport -> MPV -> MR2, Highlander & Sequoia -> New Beetle -> Nippondenso Compressor -> Nissan -> Odyssey -> Outback -> Passat -> Passport -> Porsche -> Prelude & S2000 -> Protege -> RAV4 -> RSX -> Saab -> Sanden Compressor -> Santa Fe & Sonata -> Sienna & Tacoma -> Subaru -> Suzuki -> TL -> Toyota -> Tundra -> VehiCROSS -> Volkswagen -> Volvo -> XG300 & XG350
Vehicle: 2002 Toyota Camry 2.4 L4 GAS
Remove defective components. Add the proper amount of oil to each replacement component. Most recovery/recycling equipment will measure the amount of oil being removed. This is the amount of oil to be added back to the system, follow manufactures instructions provided with the recovery/recycling station.
Acura
Integra
When replacing compressor drain old and new units. Add oil to new compressor equal to 5.0 oz. minus amount drained from old unit, but do not add more than 1.7 oz. of oil.
When replacing other system components add the following amount of new oil...
CLICK HERE TO GET FULL ACCESS TO 2002 Toyota Camry A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 2002 Toyota Camry AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 2002 Toyota Camry cars and light trucks from 1990+
Toyota -> Component Replacement & Adjustment -> Condenser, Replace -> 4Runner -> Avalon -> Camry -> Camry Solara -> Celica -> Corolla -> Echo & RAV4 -> Highlander -> Land Cruiser -> MR2 -> RAV4 -> Sequoia & Tundra -> Sienna -> Tacoma
Vehicle: 2002 Toyota Camry 2.4 L4 GAS
Avalon
- Recover refrigerant as outlined under .
- Remove radiator fan and condenser fan.
- Remove radiator upper mountings.
- Disconnect refrigerant lines at condenser, then cap all openings. Discard O-rings.
- Remove condenser upper mounting, then move radiator to engine side and condenser to radiator side.
- Remove condenser mounting bolts and the condenser.
- Reverse procedure to install, noting the following:
- If condenser is replaced, add 1.4 oz. of new refrigerant oil to compressor.
- Do not use old O-rings. Always install n...
CLICK HERE TO GET FULL ACCESS TO 2002 Toyota Camry A/C & HEATER SERVICE PROCEDURES
A/C & HEATER SERVICE PROCEDURES FOR 2002 Toyota Camry AUTOMOBILES
Air Conditioner and Heater Service Includes module configuration procedures, general service, maintenance, automatic temperature control, compressor services, electric cooling fans, vacuum diagrams, specifications, and manual air conditioning and heater diagnostics and replacement procedures for domestic and imported 2002 Toyota Camry cars and light trucks from 1990+
Toyota -> Component Replacement & Adjustment -> Thermostat, Replace -> 1MZ-FE Engine -> 2AZ-FE Engine -> 2RZ-FE & 3RZ-FE Engines -> 5S-FE Engine -> 5VZ-FE Engine -> Avalon -> Camry & Camry Solara -> Celica -> Corolla -> Echo -> Highlander -> Land Cruiser, Sequoia & Tundra -> MR2 -> RAV4 -> Sienna -> Tacoma & 4Runner
Vehicle: 2002 Toyota Camry 3.0 V6 GAS
Avalon
- Drain coolant into a suitable container.
- Remove engine appearance cover mounting nuts, then the cover.
- Remove air cleaner hose and resonator assembly.
- Disconnect heater hoses as required.
- Disconnect ECT sensor electrical connectors.
- Remove wiring harness protector mounting nut, disconnect clamp, then move protector away from cylinder head.
- Remove water inlet pipe mounting nut at lefthand cylinder head, then separate pipe from head. Discard O-ring.
- Remove three thermostat housing mounting nuts, then the housing and therm...
CLICK HERE TO GET FULL ACCESS TO 2002 Toyota Camry A/C & HEATER SERVICE PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |
