Auto Parts Search
Automotix DIY provides automotive consumers and do it yourselfers; the most comprehensive repair information about 2003 Acura CL car and truck
repair procedures including Acura engine diagrams, wiring diagrams, repair work estimating measures, technical service bulletins, auto body work
guidance, starter & alternator replacement procedures, serpentine belt replacement procedures, radiator & hose replacement procedures, tune-up &
drivability specifications, quick lube illustrations, preventive maintenance guide, engine light reset instructions, parts removal and install
procedures, fuel filter replacement directions, component location diagrams, air filter locations & replacement instructions, a/c
system specifications, and general auto service procedures. You don't have to be a car mechanic or technician to know how to fix
your 2003 Acura CL automobile. Try the Automotix DIY solution today!
We have info for following modifications of 2003 Acura CL
- 2003 Acura CL 3.2 V6 GAS, CC:3210, Fuel Injection
- 2003 Acura CL S 3.2 V6 GAS, CC:3210, Fuel Injection
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2003 Acura CL AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2003 Acura CL cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2003 Acura CL S 3.2 V6 GAS
Front
- Raise and support vehicle and support it with safety stands.
- Remove wheel nuts and front wheels.
- Drain transmission fluid into a suitable container, then reinstall drain plug using new washer.
- Lift up locking tab on spindle nut then remove nut.
- Hold stabilizer ball joint pin with hex wrench and remove flange nut then separate from stabilizer link from lower arm.
- Remove self-locking nut with 12mm dampner fork mounting bolt and 10mm dampner pinch bolt then remove dampner fork.
- Remove cotter pin from lower arm ball joint castle nut and remove nut then separate lower ball join...
CLICK HERE TO GET FULL ACCESS TO 2003 Acura CL DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES FOR 2003 Acura CL AUTOMOBILES
Includes CV axle, universal joint, and driveline replacement, for domestic and imported 2003 Acura CL cars and light trucks from 1990+.
CV AXLE SHAFT, Replace -> Front
Vehicle: 2003 Acura CL 3.2 V6 GAS
Front
- Raise and support vehicle and support it with safety stands.
- Remove wheel nuts and front wheels.
- Drain transmission fluid into a suitable container, then reinstall drain plug using new washer.
- Lift up locking tab on spindle nut then remove nut.
- Hold stabilizer ball joint pin with hex wrench and remove flange nut then separate from stabilizer link from lower arm.
- Remove self-locking nut with 12mm dampner fork mounting bolt and 10mm dampner pinch bolt then remove dampner fork.
- Remove cotter pin from lower arm ball joint castle nut and remove nut then separate lower ball join...
CLICK HERE TO GET FULL ACCESS TO 2003 Acura CL DRIVELINE, U-JOINT & CV AXLES REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
| More parts |



